HI All,

Problem is fixed by adding append_branch(); in the failure_route
failure_route[1] {
	if (t_was_cancelled()) {


		xdbg("transaction was cancelled by UAC\n");

		return;
	}
	 xlog("L_INFO", "failure_route - call forward to Voice Mail - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");
        # restore initial uri

	avp_pushto("$ruri", "i:10");

	prefix("1");
	# route to Asterisk Media Server

	rewritehostport("
10.10.10.11:5060
");
	resetflag(2);
        append_branch();
	route(1);

}
Regards,
Howard

On 5/18/07, Howard Tang <howard615@gmail.com> wrote:
I have the same problem. It works fine if the forward happened in

	# native SIP destinations are handled using our USRLOC DB
		if (!lookup("location")) {
			if(isflagset(2)) {

                                xlog("L_INFO", "Callee is Offline, call forward to Voice Mail - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");

				# route to Asterisk Media Server

				prefix("1");
				rewritehostport("10.10.10.11:5060
");

				route(1);
			} else {
				sl_send_reply("404", "Not Found");

				exit;
			}
May 18 09:06:21 localhost /usr/sbin/openser[24410]: Callee is Offline, call forward to Voice Mail - M=INVITE RURI= sip:0280000000@10.10.1.2 F= sip:0299000000@10.10.1.2 T=sip:0280000000@10.10.1.2 IP= 10.10.1.1 ID=call-F11EC874-4CE7-2910-000A-3E6@10.10.1.1

It is not working good in Failure_route 


failure_route[1] {
	if (t_was_cancelled()) {


		xdbg("transaction was cancelled by UAC\n");
		return;
	}
	 xlog("L_INFO", "failure_route - call forward to Voice Mail - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n");

        # restore initial uri

	avp_pushto("$ruri", "i:10");
	prefix("1");
	# route to Asterisk Media Server

	rewritehostport("

10.10.10.11:5060");
	resetflag(2);
	route(1);

}


May 18 09:08:45 localhost /usr/sbin/openser[24414]: failure_route - call forward to Voice Mail - M=INVITE RURI=sip:0280000000@10.10.2.126 :57042;rinstance=dbdab29df7aa260b F= sip:0299000000@10.10.1.2 T= sip:0280000000@10.10.1.2 IP=10.10.1.1 ID= call-F17BFBB3-4FE7-2910-000C-3E8@10.10.1.1
May 18 09:08:59 localhost /usr/sbin/openser[24399]: ERROR:tm:t_forward_nonack: no branch for forwarding
May 18 09:08:59 localhost /usr/sbin/openser[24399]: ERROR:tm:w_t_relay: t_forward_nonack failed
May 18 09:09:09 localhost /usr/sbin/openser[24399]: ERROR:tm:t_forward_nonack: failure to add branches

Anyone have an idea on where i have done wrong?

Regards,
Howard



On 5/18/07, Bill Neely <ceo@xantek.cc> wrote:
I am having a very similar problem. Using v1.2.0

Here is my route:
route[1] {

if(isflagset(2))
    t_on_failure("2");


    if (!t_relay()) {
        sl_reply_error();
    };
    exit;
}

failure_route[2]
{
    if ( t_check_status("408"))

    {
        xlog("L_ERR","rrreeeeeeeeeeeeeeeeeecalling froute2 <$rm><$ru>\n");
        avp_pushto("$ruri", "$avp(i:10)");
        prefix("777");
        # route to Asterisk Media Server
        rewritehostport("66.xxx.20.50:5060");
        resetflag(2);

        xlog("L_ERR","22222222222222222222calling froute2 <$rm><$ruri>\n");
        route(1);


    }
    exit;
}

Here is error message received:

1(53165) rrreeeeeeeeeeeeeeeeeecalling froute2
<INVITE><sip:1020101@67.188.xxx.188:35937;rinstance=e867c589f1896b12>
1(53165) 22222222222222222222calling froute2
<INVITE><sip:7771020101@66.xxx.20.50:5060;rinstance=e867c589f1896b12>
1(53165) ERROR:tm:t_forward_nonack: no branch for forwarding
1(53165) ERROR:tm:w_t_relay: t_forward_nonack failed

Bogdan-Andrei Iancu wrote:
> Check with log/xlog prints if it gets to t_on_failure() and  into
> failure route.
>
> regards,
> Bogdan
>
> Howard Tang wrote:
>> HI Bogdan,
>>
>> Thank you for your reply. I did that but i forget to include in this
>> email.
>>
>>
>> route[1] {
>>        #check for nat flag
>>        if (isflagset(2))
>>        {
>>                fix_nated_contact();
>>                use_media_proxy();
>>        }
>>
>>        t_on_reply("1");
>>        t_on_failure("1");
>>
>>        # send it out now; use stateful forwarding as it works reliably
>>        # even for UDP2TCP
>>        xlog("L_INFO", "Request leaving server - M=$rm RURI=$ru F=$fu
>> T=$tu IP=$si ID=$ci\n");
>>        if (!t_relay()) {
>>                if(isflagset(2))
>>                        end_media_session();
>>                sl_reply_error();
>>        };
>>        exit;
>> }
>>
>> The voice mail work fine only when someone call in and the UA is
>> offline (not registered to the openser), if the UA is online, the
>> call will ring the UA until the caller hang up.
>>
>> I want to set up some sort of timer, i.e. 60 second and the call will
>> forwarded to the Voice mail.
>>
>> Can you suggest me an idea on how i can make this happen please?
>>
>> Regards,
>> Howard
>>
>>
>>
>> On 5/17/07, *Bogdan-Andrei Iancu* < bogdan@voice-system.ro
>> <mailto: bogdan@voice-system.ro>> wrote:
>>
>>     Hi Howard,
>>
>>     I guess you do not arm the failure route - use t_on_failure("1");
>>     before
>>     relaying the request.
>>
>>     regards,
>>     bogdan
>>
>>     Howard Tang wrote:
>>     > Hi All,
>>     >
>>     > I have followed a tutorial and set up Asterisk as a voice mail
>>     server.
>>     >
>>     >
>>
>> http://www.voip-info.org/wiki/view/Realtime+Integration+Of+Asterisk+With+OpenSER
>>
>>     >
>>
>> < http://www.voip-info.org/wiki/view/Realtime+Integration+Of+Asterisk+With+OpenSER
>>
>>
>> < http://www.voip-info.org/wiki/view/Realtime+Integration+Of+Asterisk+With+OpenSER >>
>>
>>     >
>>     > It works fine when the UA is offline. Now, I want a call
>>     forwarded to
>>     > the Voice mail server when there is no answer from the UA after 60
>>     > seconds(UA is registered on the openser).
>>     >
>>     > What should I do? Below is my config (copy from the above link).
>>     >
>>     >
>>     >               # requests for Media server
>>     >               if(is_method("INVITE") && !has_totag() &&
>>     uri=~"sip:\*9") {
>>     >                       route(3);
>>     >                       exit;
>>     >               }
>>     >
>>     >               # mark transaction if user is in voicemail group
>>     >
>>     >               if(is_method("INVITE") && !has_totag()
>>     >                       && is_user_in("Request-URI","voicemail"))
>>     >               {
>>     >                       xdbg("user [$ru] has voicemail redirection
>>     enabled\n");
>>     >
>>     >                       # backup R-URI
>>     >                       avp_write("$ruri", "i:10");
>>     >                       setflag(2);
>>     >               };
>>     >
>>     >               # native SIP destinations are handled using our
>>     USRLOC DB
>>     >               if (!lookup("location")) {
>>     >                       if(isflagset(2)) {
>>     >
>>     >                               # route to Asterisk Media Server
>>     >                               prefix("1");
>>     >                               rewritehostport("10.10.10.11:5060
>>     < http://10.10.10.11:5060> < http://10.10.10.11:5060>");
>>     >                               route(1);
>>     >                       } else {
>>     >                               sl_send_reply("404", "Not Found");
>>     >
>>     >                               exit;
>>     >                       }
>>     >               };
>>     >
>>     > # voicemail access
>>     > # - *98 - listen caller's voice messages, being prompted for pin
>>     > # - *981 - listen voice messages, being promted for mailbox and
>> pin
>>     > # - *98XXXX - leave voice message to XXXX
>>     >
>>     > #
>>     > route[3] {
>>     >       # direct voicemail
>>     >       if (uri =~ "sip:\*98@" ) {
>>     >               rewriteuser("1");
>>     >               xdbg("voicemail access\n");
>>     >       } else if (uri =~ "sip:\*981@" ) {
>>     >
>>     >               strip(4);
>>     >               rewriteuser("11");
>>     >       } else if (uri =~ "sip:\*98.+@" ) {
>>     >               strip(3);
>>     >               prefix("1");
>>     >       } else {
>>     >               xlog("unknown media extension $rU\n");
>>     >               sl_send_reply("404", "Unknown media service");
>>     >
>>     >               exit;
>>     >       }
>>     >
>>     >       # route to Asterisk Media Server
>>     >       rewritehostport("10.10.10.11:5060
>>     < http://10.10.10.11:5060> < http://10.10.10.11:5060>");
>>     >       route(1);
>>     > }
>>     >
>>     > failure_route[1] {
>>     >       if (t_was_cancelled()) {
>>     >
>>     >               xdbg("transaction was cancelled by UAC\n");
>>     >               return;
>>     >       }
>>     >       # restore initial uri
>>     >       avp_pushto("$ruri", "i:10");
>>     >       prefix("1");
>>     >       # route to Asterisk Media Server
>>     >
>>     >       rewritehostport(" 10.10.10.11:5060
>>     <http://10.10.10.11:5060> < http://10.10.10.11:5060>");
>>     >       resetflag(2);
>>     >       route(1);
>>     >
>>     > }
>>     >
>>     >
>>     >
>>
>> ------------------------------------------------------------------------
>>     >
>>     > _______________________________________________
>>     > Users mailing list
>>     > Users@openser.org <mailto: Users@openser.org>
>>     > http://openser.org/cgi-bin/mailman/listinfo/users
>>     >
>>
>>
>>
>>
>>
>>
>> --
>> Howard Tang
>> ICQ : 259083
>> MSN : howard615@hotmail.com <mailto: howard615@hotmail.com>
>
>
> _______________________________________________
> Users mailing list
> Users@openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users

--
Bill Neely
Xantek, Inc.
1-866-553-3833
1-702-874-3833




--
Howard Tang
ICQ : 259083
MSN : howard615@hotmail.com



--
Howard Tang
ICQ : 259083
MSN : howard615@hotmail.com