5.3 yes the patch I had in mine is in.

It seems like what you are doing is fine.
We do not see the definition of your FLAGS in you example I am assuming they are not overlapping another flag "bit" that could be used by another module etc.
There could be a concern that the same flag as multiple purpose and alias/definition.

By reset I meant calling setflag multiple times :

modparam("acc", "log_missed_flag", 12)
...
setflag(12)


On Wed, Feb 12, 2020 at 1:07 PM Voip support <voipexpert0@gmail.com> wrote:
I have this code in very beginning of Request route of kamailio.cfg

        # handle retransmissions
        if (!is_method("ACK")) {
                if(t_precheck_trans()) {
                        t_check_trans();
                        exit;
                }
                t_check_trans();
        }

I think its left from the default config - i changed only few things in default config to add calls per second limit / dispatcher some routing logic but nothing more and set the flags for ACC module to save.

śr., 12 lut 2020 o 22:03 Voip support <voipexpert0@gmail.com> napisał(a):
I am using kamailio 5.3 from debian (installed in ubuntu 16.04) repository.

Could you please explain bit more what flag to reset call-id you mean. 
What does the code you pasted, where it should be in kamailio.cfg?

Thanks upfront for explanation! 
Regards,
Tom

śr., 12 lut 2020 o 17:11 Julien Chavanton <jchavanton@gmail.com> napisał(a):
The flag will prevent duplicates. Which version are you using, there was a patch a few months ago


The explanation shold be that you are resetting them.

Are you using the following, one option to confirm that your logic is good is add one log line at INFO / NOTICE level logging each time you reset the flag including the call-id :

if (t_precheck_trans()) {
        t_check_trans();  
        exit;
}


On Wed, Feb 12, 2020 at 4:13 AM Voip support <voipexpert0@gmail.com> wrote:
Dear Community,
I have setup ACCDB module to save missed / failed and successful calls.

My issue is that i am getting duplicated entries for INVITE / BYE in acc database table.

For example:
id;method;from_tag;to_tag;callid;sip_code;sip_reason;time;src_ip;dst_user;dst_domain;src_user;src_domain;cdr_id
231838;INVITE;21-7FC1D85;1914472180948750;KKyIdaaJceAu7pzN@172.16.0.35;200;OK;2020-02-11 19:16:28;22.33.44.55;nlb124#78019989897056;11.11.11.11;asterisk;172.16.0.35;0
231839;INVITE;21-7FC1D85;1914472180948750;KKyIdaaJceAu7pzN@172.16.0.35;200;OK;2020-02-11 19:16:28;22.33.44.55;nlb124#78019989897056;11.11.11.11;asterisk;172.16.0.35;0
231840;INVITE;21-7FC1D85;1914472180948750;KKyIdaaJceAu7pzN@172.16.0.35;200;OK;2020-02-11 19:16:28;22.33.44.55;nlb124#78019989897056;11.11.11.11;asterisk;172.16.0.35;0
231841;BYE;21-7FC1D85;1914472180948750;KKyIdaaJceAu7pzN@172.16.0.35;200;OK;2020-02-11 19:16:36;22.33.44.55;;190.196.153.130;asterisk;172.16.0.35;0
231842;BYE;21-7FC1D85;1914472180948750;KKyIdaaJceAu7pzN@172.16.0.35;200;OK;2020-02-11 19:16:36;22.33.44.55;;190.196.153.130;asterisk;172.16.0.35;0
231844;BYE;21-7FC1D85;1914472180948750;KKyIdaaJceAu7pzN@172.16.0.35;200;OK;2020-02-11 19:16:36;22.33.44.55;;190.196.153.130;asterisk;172.16.0.35;0

Following way: 
# ----- acc params -----
/* what special events should be accounted ? */
modparam("acc", "early_media", 0)
modparam("acc", "report_ack", 0)
modparam("acc", "report_cancels", 0)
/* by default ww do not adjust the direct of the sequential requests.
 * if you enable this parameter, be sure the enable "append_fromtag"
 * in "rr" module */
modparam("acc", "detect_direction", 0)
/* account triggers (flags) */
modparam("acc", "log_flag", FLT_ACC)
modparam("acc", "log_missed_flag", FLT_ACCMISSED)
modparam("acc", "log_extra",
        "src_user=$fU;src_domain=$fd;src_ip=$si;"
        "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
modparam("acc", "failed_transaction_flag", FLT_ACCFAILED)
/* enhanced DB accounting */
#!ifdef WITH_ACCDB
modparam("acc", "db_flag", FLT_ACC)
modparam("acc", "db_missed_flag", FLT_ACCMISSED)
modparam("acc", "db_url", DBURL)
#modparam("acc", "db_extra",
#       "src_user=$fU;src_domain=$fd;src_ip=$si;"
#       "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
modparam("acc", "db_extra",
        "src_user=$fU;src_domain=$fd;dst_user=$rU;dst_domain=$rd;src_ip=$si")

#  our lines
modparam("acc", "cdrs_table", "acc_cdrs")
modparam("acc", "cdr_on_failed", 1)
#!endif

Then in routing config i set setflag(FLT_ACC FLT_ACCMISSED FLT_ACCFAILED in several places.

My question is - each setflag cause an entry to be saved in DB?
How can i debug and resolve the issue of duplicates.

I am trying to use a CDR script found somewhere on siremis sites to do the accounting but it's making trouble because due to duplicates in acc table i am getting cdrs unique key violations.

Secondary question is - if a BYE is not received / lost is there any way to send a check triggered by kamailio to each caller and callee side to check if dialog is still active.
I would not like to use session timers (as endpoints need to support it).

Best regards,
Tom

_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users