# # $Id: openser.cfg,v 1.5 2005/10/28 19:45:33 bogdan_iancu Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=4 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) # Uncomment these lines to enter debugging mode fork=yes log_stderror=no check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/openser_fifo" listen=192.168.1.37:5060 # # uncomment the following lines for TLS support #disable_tls = 0 #listen = tls:your_IP:5061 #tls_verify = 1 #tls_require_certificate = 0 #tls_method = TLSv1 #tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem" #tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem" #tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/openser/modules/mysql.so" loadmodule "/usr/local/lib/openser/modules/sl.so" loadmodule "/usr/local/lib/openser/modules/tm.so" loadmodule "/usr/local/lib/openser/modules/rr.so" loadmodule "/usr/local/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/lib/openser/modules/usrloc.so" loadmodule "/usr/local/lib/openser/modules/registrar.so" loadmodule "/usr/local/lib/openser/modules/textops.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/openser/modules/auth.so" loadmodule "/usr/local/lib/openser/modules/auth_db.so" loadmodule "/usr/local/lib/openser/modules/avpops.so" loadmodule "/usr/local/lib/openser/modules/xlog.so" loadmodule "/usr/local/lib/openser/modules/acc.so" loadmodule "/usr/local/lib/openser/modules/alias_db.so" loadmodule "/usr/local/lib/openser/modules/domain.so" modparam("avpops","avp_url","mysql://root:tanzeel@tanzeel/openser") modparam("avpops","avp_table","avptable") # ----------------- setting module-specific parameters --------------- # Database Configuration #modparam("usrloc", "db_url", "mysql://openser:tanzeel@tanzeel/openser") # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) #multi domain configuration modparam("domain", "db_mode", 1) modparam("alias_db|usrloc|registrar", "use_domain", 1) ############################## AVP parameters ########## modparam("avpops","avp_table","usr_preferences") modparam("avpops","uuid_column","uuid") modparam("avpops","username_column","username") modparam("avpops","domain_column","localhost") modparam("avpops","attribute_column","attribute") modparam("avpops","value_column","value") modparam("avpops","type_column","type") modparam("avpops","use_domain",1) #modparam("avpops","avp_aliases","uuid=I:2;email=s:raza@localhost;fwd=i:53" #modparam("avpops","avp_aliases","uuid=I:1;ruser=I:102;rdomain=I:103;dummy1=I:104;dummy2=I:105") # ------------------------- request routing logic ------------------- # main routing logic route{ # route(ROUTE_DEBUG_FLAGS); # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); ####################################### AVP EXAMPLE EXAMPLE################ # if the request pretends to belong to a local domain if (is_from_local()) #2 { #authenticate only INVITE and MESSAGES if (method=="INVITE" || method=="MESSAGE") { # is it a trusted IP address? - first load the trusted IPs (avp # NAME 't_ips" from DB table "ips") for the target domain (domain part # of RURI); then check if at least one value of 't_ips' AVPs equals # the source IP of the request if (!(avp_db_load("$ruri/domain","s:t_ips/usr_preferences") && avp_check("s:t_ips", "eq/$src_ip/gi"))) { sl_send_reply("404", "not allowed"); exit(); }; log("**************** AVP PRINT START ******************\n"); avp_print(); log("**************** AVP PRINT END ******************\n"); } } ######################### AVP CODE ENDS ######### # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS #if(uri=~"@tls_domain1.net") { # t_relay_to_tls("IP_domain1","port_domain1"); # exit; #} else if(uri=~"@tls_domain2.net") { # t_relay_to_tls("IP_domain2","port_domain2"); # exit; #} route(1); }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("localhost", "subscriber")) { www_challenge("localhost", "0"); exit; }; save("location"); exit; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; }