Are you sure you have set t_on_failure() for the respective transaction?

Cheers,
Daniel

On 03/03/14 17:44, Marc Soda wrote:
So I've found out that NAT has nothing to do with it.  The bit about things working when the NAT device is removed was wrong.

So my question becomes:  Why would Kamailio ignore a 401 rather sending it to a failure route?

Thanks in advance,
Marc


On Mon, Mar 3, 2014 at 9:10 AM, Marc Soda <msoda@coredial.com> wrote:
I forget to mention, the nat device is in front of the Kamailio servers, not the endpoints.


On Fri, Feb 28, 2014 at 6:22 PM, Marc Soda <msoda@coredial.com> wrote:
I have a Kamailio server setup which is registers to a back end server on behalf of endpoints.  The endpoints can register to Kamailio but Kamailio is failing to register to the server when I put a NAT device in front of it.  Without the NAT device it works fine.

The problem is the 401 that comes back seems to be ignored by Kamailio.  I have a failure route setup to auth, but it is never hit.  I see the 401 in onrely_route, but not the failure_route.  I'm assuming it's a NAT issue because removing the device fixes the issue.

Anyone have any ideas?

The 401 being ignored:

SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP 10.0.10.11;branch=z9hG4bKe5d6.178378f7.0;received=198.XXX.XXX.XXX
Via: SIP/2.0/UDP 127.0.0.1:12354;rport=6545;received=198.XXX.YYY.YYY;branch=z9hG4bK-1879-1-3
CSeq: 2 REGISTER
User-Agent: CoreDialPBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO
Supported: replaces
WWW-Authenticate: Digest algorithm=MD5, realm="fe-c7c5-9o.domain.com", nonce="151e4f60"
Content-Length: 0

Thanks,
Marc


_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users



-- 
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda