#
# $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
#
#
simple quick-start config script
#
# ----------- global configuration parameters
------------------------
#debug=3 # debug level (cmd
line:
-dddddddddd)
#fork=yes
#log_stderror=no
# (cmd line: -E)
/* Uncomment these lines to enter debugging mode
debug=7
fork=no
log_stderror=yes
*/
check_via=no # (cmd. line:
-v)
dns=no #
(cmd. line: -r)
rev_dns=no # (cmd. line:
-R)
#port=5060
#children=4
fifo="/tmp/ser_fifo"
fifo_mode=0666
# ------------------ module loading
----------------------------------
# Uncomment this if you want to use SQL database
loadmodule
"/lib/ser/modules/mysql.so"
loadmodule "/lib/ser/modules/sl.so"
loadmodule
"/lib/ser/modules/tm.so"
loadmodule
"/lib/ser/modules/maxfwd.so"
loadmodule
"/lib/ser/modules/registrar.so"
loadmodule "/lib/ser/modules/auth.so"
#
loadmodule "/lib/ser/modules/textops.so"
# loadmodule
"/lib/ser/modules/enum.so"
loadmodule "/lib/ser/modules/group.so"
loadmodule "/lib/ser/modules/nathelper.so"
modparam("nathelper",
"natping_interval", 10)
# loadmodule "/lib/ser/modules/vm.so"
# modparam("vm", "db_url",
"sql://root:@127.0.0.1/ser")
# modparam("vm", "email_column", "
sip@xxx.xxx.net")
# modparam("vm",
"domain_column", "ser.vci.net")
loadmodule "/lib/ser/modules/acc.so"
modparam("acc", "db_url",
"sql://root:@127.0.0.1/ser")
modparam("acc", "log_missed_flag",
2)
modparam("acc", "log_level", 1)
modparam("acc", "log_flag",
1)
modparam("acc", "db_flag", 2)
modparam("acc", "db_missed_flag",
2)
loadmodule "/lib/ser/modules/usrloc.so"
modparam("usrloc",
"db_mode", 0)
modparam("usrloc", "db_mode", 2)
loadmodule "/lib/ser/modules/auth_db.so"
modparam("auth_db",
"calculate_ha1", yes)
modparam("auth_db", "password_column",
"password")
loadmodule "/lib/ser/modules/rr.so"
modparam("rr", "enable_full_lr",
1)
# ------------------------- request routing logic
-------------------
# main routing logic
route{
# initial sanity checks --
messages with
# max_forwards==0,
or excessively long requests
if
(!mf_process_maxfwd_header("10"))
{
sl_send_reply("483","Too Many
Hops");
break;
};
if ( msg:len > max_len )
{
sl_send_reply("513", "Message too
big");
break;
};
if (nat_uac_test("3"))
{
log("1,Connection from someone behind a
NAT");
};
if (method=="CANCEL")
{
log(1,"Sent CANCEL request");
}
if (method=="INVITE")
{
log(1,"Sent INVITE request");
}
# we record-route all messages
-- to make sure that
# subsequent
messages will go through our proxy;
that's
# particularly good if
upstream and downstream entities
#
use different transport protocol
record_route();
# loose-route
processing
if (loose_route())
{
t_relay();
break;
};
setflag(2);
# if the request is for other
domain use UsrLoc
# (in case, it
does not work, use the following
command
# with proper names and
addresses in it)
if (uri==myself)
{
log(1,"processing request for ser.vci.net domain");
if (method=="REGISTER")
{
log(1,"register request for xxx.xxx.net
domain");
if (!www_authorize("xxx.xxx.net", "subscriber"))
{
www_challenge("ser.vci.net",
"0");
break;
};
save("location");
break;
};
# native SIP destinations are handled using our USRLOC
DB
if (!lookup("location"))
{
log(1,"404 - Not
Found");
acc_db_request("404 Not Found",
"acc");
sl_send_reply("404", "Not
Found");
break;
};
};
# forward to current uri now;
use stateful forwarding; that
#
works reliably even if we forward from TCP to
UDP
if (!t_relay())
{
log(1,"not sure what this
does");
sl_reply_error();
};
}