First,

The three radius messages from the radius log are just INFO messages, not error messages. This is a good thing.

Try using the lowest possible unused number for the attributes. My attributes are in the 240 range. Again, I haven't tested it but perhaps radius has an upper limit of maybe 255 or maybe 1024.

Norm

> Hi Norman,
>
> Thanks for the reply.
> According to your suggestion, I have added the following lines in raddb/dicitionary:
> ATTRIBUTE Src-Leg 1075 integer
>
> ATTRIBUTE Dst-Leg 1076 integer
>
>
> change in radiusclient-ng/dictionary:
> ATTRIBUTE Src-Leg 1075 integer
> ATTRIBUTE Dst-Leg 1076 integer
>
> change in openser/openser.cfg:
> #modparam("acc", "multi_leg_info", "src_leg=$avp(i:901);dst_leg=$avp(i:902)")
> modparam("acc", "multi_leg_info", "Src-Leg=$avp(i:901);Dst-Leg=$avp(i:902)")
>
> Note, I have commented out the original src_leg/dst_leg definition.
> I don't know what is that i:901 and i:902 means, so I simply change the first letter to upper
> case and change "_" to "-".
>
> Restarted radiusd, and try to start openser then found the following error in the
> /var/log/messages file:
> ERROR:acc:extra2int: <Src-Leg> is not a number
>
> When I started radiusd, there are info messages written to /var/log/radiusd.log file:
> Wed Oct 3 09:28:45 2007 : Info: Using deprecated naslist file. Support for this will go away
> soon.
> Wed Oct 3 09:28:45 2007 : Info: rlm_exec: Wait=yes but no output defined. Did you mean
> output=none?
> Wed Oct 3 09:28:45 2007 : Info: Ready to process requests.
>
> Thanks
> Sam
>
> ----- Original Message ----
>
From: Norman Brandinger <norm@goes.com>
> To: Live Great <livegreat007@yahoo.com>
> Cc: users@openser.org
> Sent: Wednesday, October 3, 2007 3:26:40 AM
> Subject: Re: can't get code for the Failed attribute
>
> Hi Sam,
>
> If you altered the dictionary entries, you MUST make sure that your
> openser.cfg, has also been updated.
>
> For example:
>
> modparam("acc", "radius_extra", "Src-Leg=$avp(s:source_leg);
> Dst-Leg=$avp(s:destination_leg)")
>
> Note that Src-Leg and Dst-Leg MUST be in the dictionary for BOTH
> radiusclient-ng AND radiusd.
>
> Regards,
> Norm
>
> Live Great wrote:
>> Hi,
>>
>> In your example, do you meant openser will trainsform Src-Leg to
>> src_leg and Dst-Leg to dst_leg?
>> After I followed your suggestion and changed the definition to,
>> ATTRIBUTE Src-Leg 1075 string
>> ATTRIBUTE Dst-Leg 1076 string
>>
>> I get an error:
>> ERROR: acc: can't get code for the src_leg attribute
>>
>> I have a feeling that it is case sensitive, and openser is looking for
>> src_leg instead Src-Leg.
>>
>> Thanks
>> Sam.
>>
>>
>> ----- Original Message ----
>>
From: Norman Brandinger <norm@goes.com>
>> To: Live Great <livegreat007@yahoo.com>
>> Cc: users@openser.org
>> Sent: Tuesday, October 2, 2007 9:42:15 PM
>> Subject: Re: can't get code for the Failed attribute
>>
>> Hello Sam,
>>
>> The definition you used:
>>
>> ATTRIBUTE src_leg 0 string
>>
>> Probably isn't valid because "0" is more than likely already being
>> used. Notice that the various ATTRIBUTE numbers are all unique and just
>> increment. So use the next higher number that is available. If the
>> last ATTRIBUTE was 240 then your definition might look like:
>>
>> ATTRIBUTE src_leg 241 string
>>
>> You might also want to consider the general naming convention that is
>> used. The above example would then look as follows:
>>
>> ATTRIBUTE Src-Leg 241 string
>> Note, when you get around to inserting this data into a database, the
>> column name will probably not be allowed to have a dash (unless the
>> column name is quoted).
>>
>> Regards,
>> Norm
>>
>>
>> Live Great wrote:
>> > It looks like it doesn't look up the dictionary files in
>> > /usr/local/share/freeradius/ directory.
>> > But src_leg and dst_leg are not defined in the share directory.
>> >
>> > Sam.
>> >
>> >
>> > ----- Original Message ----
>> >
From: Live Great <livegreat007@yahoo.com>
>> > To: Norman Brandinger <norm@goes.com>
>> > Cc: users@openser.org
>> > Sent: Tuesday, October 2, 2007 10:17:47 AM
>> > Subject: Re: can't get code for the Failed attribute
>> >
>> > Hi Norman,
>> >
>> > Thank you for the reply.
>> > With the definition of "ATTRIBUTE src_leg 0 string", I got an error
>> > "src_leg is not a number".
>> > After changed it to the following definition,
>> > ATTRIBUTE Acct-Status-Type 40 integer
>> > ATTRIBUTE Service-Type 6 integer
>> > ATTRIBUTE Event-Timestamp 55 integer
>> > ATTRIBUTE Acct-Session-Id 44 string
>> > ATTRIBUTE src_leg 1 integer
>> > ATTRIBUTE dst_leg 1 integer
>> > VALUE Acct-Status-Type Start 1
>> > VALUE Acct-Status-Type Stop 2
>> > VALUE Acct-Status-Type Failed 0
>> > VALUE Service-Type Sip-Session 15
>> >
>> > I still got this error:
>> > ERROR:acc:extra2int: <src_leg> is not a number
>> >
>> > Thanks
>> > Sam
>> > ----- Original Message ----
>> >
From: Norman Brandinger <norm@goes.com>
>> > To: Live Great <livegreat007@yahoo.com>
>> > Cc: users@openser.org
>> > Sent: Tuesday, October 2, 2007 9:43:41 AM
>> > Subject: Re: can't get code for the Failed attribute
>> >
>> > Hi Sam,
>> >
>> > In /usr/local/share/freeradius/dictionary.rfc2866 there exists the
>> > following entry:
>> >
>> > VALUE Acct-Status-Type Failed 15
>> >
>> > I'm not an expert in this area, but it appears that "Failed" is sort of
>> > predefined. You probably should NOT use "Failed", instead create a
>> > unique attribute such as "failed-reason". This is of course assuming
>> > the rest of your definitions are good.
>> >
>> > Please do not cross-post configuration questions of this type to the
>> > developers mailing list.
>> >
>> > Regards,
>> > Norm
>> >
>> >
>> > Live Great wrote:
>> > > Hi,
>> > >
>> > > After added the following Attributes in the radiusclient-ng/dictionary
>> > > file:
>> > > ATTRIBUTE src_leg 0 string
>> > > ATTRIBUTE dst_leg 0 string
>> > > ATTRIBUTE Failed 0 string
>> > >
>> > > I got the following error:
>> > > ERROR: acc: can't get code for the Failed attribute value
>> > >
>> > > How to define a proper attribute in the dictionary file?
>> > > Thanks
>> > > Sam
>> > >
>> > > ----- Original Message ----
>> > >
From: Norman Brandinger <norm@goes.com>
>> > > To: Live Great <livegreat007@yahoo.com>
>> > > Cc: devel@openser.org
>> > > Sent: Monday, October 1, 2007 9:01:54 PM
>> > > Subject: Re: [OpenSER-Devel] can't get code for the Sip-Response-Code
>> > > attribute
>> > >
>> > > Good Morning,
>> > >
>> > > You need to make sure the dictionary settings are correct and exactly
>> > > match what you have specified in OpenSER.
>> > >
>> > > The dictionaries are specified in radiusclient-ng and in radiusd (and
>> > > mediaproxy if you use it)
>> > >
>> > > The error is telling you that "Sip-Response-Code" cannot be found
>> in any
>> > > of the dictionaries you have specified.
>> > >
>> > > Regards,
>> > > Norm
>> > >
>> > > Live Great wrote:
>> > > > Hi,
>> > > >
>> > > > I still can't this work, that's why I posted in the development
>> forum.
>> > > >
>> > > > I have installed openser with *_ACC=ture uncommented in the
>> > acc/Makfile..
>> > > > But I can't start openser now.
>> > > > Here is the error when I executed /usr/local/etc/rc.d/openser start:
>> > > >
>> > > > core:rc.d # ./openser start
>> > > > Command Monit to start OpenSER...
>> > > > 'openser' start: /usr/local/etc/rc.d/openser
>> > > > 'openser' failed to start
>> > > > Starting Open SIP Router:
>> > > > Listening on
>> > > > udp: 127.0.0.1 [127.0.0.1]:5060
>> > > > udp: 12x..x.x..x [12x.x.x.x]:5060
>> > > > Aliases:
>> > > > udp: xxx..xxx..com.au:5060
>> > > > udp: localhost.xxx.com.au:5060
>> > > > udp: localhost:5060
>> > > >
>> > > > In /var/log/messages:
>> > > > ERROR: acc: can't get code for the Sip-Response-Code attribute
>> > > > ERROR:acc:mod_init: failed to init radius
>> > > >
>> > > > core:rc.d # ps -auxww | grep openser
>> > > > root 35219 0.0 0.1 1520 728 p2 R+ 12:03AM 0:00.00 grep
>> > > openser
>> > > > core:rc.d # ps -auxww | grep radius
>> > > > root 35230 0.0 0.3 5004 3256 ?? Ss 12:04AM 0:00.00
>> > > > /usr/local/sbin/radiusd
>> > > > core:rc.d # ps -auxww | grep mysql
>> > > > mysql 75881 0.0 0.1 1732 1116 p1- I 20Sep07 0:00.02
>> /bin/sh
>> > > > /usr/local/bin/mysqld_safe
>> > > > --defaults-extra-file=/usr/local/var/db/mysql/my.cnf --user=mysql
>> > > > --datadir=/usr/local/var/db/mysql
>> > > > --pid-file=/usr/local/var/db/mysql/core.xxx.com.au.pid
>> > > > mysql 75924 0.0 2.7 49016 28336 p1- S 20Sep07 10:52.77
>> [mysqld]
>> > > > root 35237 0.0 0.1 1544 644 p2 RL+ 12:05AM 0:00.00 grep
>> > mysql
>> > > >
>> > > > Why I got thos acc errors when starting openser?
>> > > >
>> > > > Thanks
>> > > > SW
>> > > >
>> > > >
>> > > >
>> > > > ----- Original Message ----
>> > > >
From: Norman Brandinger <norm@goes.com>
>> > > > To: Live Great <livegreat007@yahoo.com>
>> > > > Cc: FreeRadius users mailing list
>> > > > <freeradius-users@lists.freeradius.org>; users@openser.org
>> > > > Sent: Friday, September 28, 2007 11:11:23 PM
>> > > > Subject: Re: [OpenSER-Users] Failed to compile openser with
>> freeradius
>> > > > support
>> > > >
>> > > > Comment the FREERADIUS=1 in the openser/Makefile
>> > > >
>> > > > Make sure that in modules/acc/Makefile ENABLE_RADIUS_ACC=true is not
>> > > > commented
>> > > >
>> > > > Regards,
>> > > > Norm
>> > > >
>> > > >
>> > > > Live Great wrote:
>> > > > > HI,
>> > > > >
>> > > > > In FreeBSD 6.2, I got this error when I compiled openser with
>> > > > > freeradius support.
>> > > > >
>> > > > > ../../radius.h:36:32: freeradius-client.h: No such file or
>> directory
>> > > > > acc.c: In function `init_acc_rad':
>> > > > > acc.c:464: warning: assignment makes pointer from integer without
>> > > a cast
>> > > > > acc.c:475: error: `DICT_ATTR' undeclared (first use in this
>> > function)
>> > > > > acc.c:475: error: (Each undeclared identifier is reported only
>> once
>> > > > > acc.c:475: error: for each function it appears in.)
>> > > > > acc.c:475: error: `da' undeclared (first use in this function)
>> > > > > acc.c:475: error: `DICT_VALUE' undeclared (first use in this
>> > function)
>> > > > > acc.c:475: error: `dv' undeclared (first use in this function)
>> > > > > acc.c: In function `acc_rad_request':
>> > > > > acc.c:509: error: `VALUE_PAIR' undeclared (first use in this
>> > function)
>> > > > > acc.c:514: error: invalid lvalue in assignment
>> > > > > acc.c:555: error: `OK_RC' undeclared (first use in this function)
>> > > > > gmake[1]: *** [acc.o] Error 1
>> > > > > gmake[1]: Leaving directory
>> > > > > `/usr/ports/net/openser/work/openser-1.2.2-tls/modules/acc'
>> > > > > gmake: *** [modules] Error 2
>> > > > > *** Error code 2
>> > > > >
>> > > > > Stop in /usr/ports/net/openser.
>> > > > > *** Error code 1
>> > > > >
>> > > > > Is there any way I can compile openser with freeradius support?
>> > > > >
>> > > > > Thanks
>> > > > > SW
>> > > > >
>> > >
>> ------------------------------------------------------------------------
>> > > >
>> > > >
>> > ------------------------------------------------------------------------
>> > > >
>> > > > _______________________________________________
>> > > > Devel mailing list
>> > > > Devel@openser.org
>> > > > http://openser.org/cgi-bin/mailman/listinfo/devel
>> > > >
>> > >
>> > >
>> >
>> >
>> >
>>
>>
>
>
>
>
>