Hello,
 
great. I got presence... but only when I do not enable auth.
 
Is there something I have to look out for when enabling auth
 
I've take the stock config for 3.2.0 as packed in the ubuntu package from the website, implementet your changes and reinit the database.
 
Apart from your changes I defined WITH_USRLOCDB, WITH_PRESENCE, WITH_AUTH, WITH_MYSQL.
 
No presence with auth. Presence without auth. Cleared the db in between.
 
Any hints
 
Thanks
Jonathan
 

Von: sr-users-bounces@lists.sip-router.org [mailto:sr-users-bounces@lists.sip-router.org] Im Auftrag von Peter Dunkley
Gesendet: Freitag, 27. Januar 2012 18:07
An: SIP Router "- Kamailio (OpenSER) and SIP Express Router (SER) -Users Mailing "List
Betreff: Re: [SR-Users] Sample pua_usrloc Config Was: Enableapplication/pidf+xml

When I am using pua_usrloc...

Modify the standard config:
...
loadmodule "usrloc.so"
loadmodule "pua.so"
loadmodule "pua_usrloc.so"
...
modparam("pua", "db_url", DBURL)
modparam("pua", "outbound_proxy", "sip:127.0.0.1")
modparam("pua_usrloc", "default_domain", "<<< whatever the domain your system has >>>")
modparam("pua_usrloc", "entity_prefix", "sip")
...
route[REGISTRAR] {
if (is_method("REGISTER"))
{
pua_set_publish();
...
}
...

You need to make sure Kamailio is listening on the loopback (127.0.0.1) device on port 5060, or change the pua outbound_proxy modparam to contain a real IP address and port that Kamailio is using.  Setting this outbound_proxy parameter makes sure Kamailio routes the PUBLISH generated by pua/pua_usrloc through itself (so that it can be picked up and handle_publish() is called) instead of using DNS to try and route the request.

Also make sure that the pua database table was created when you ran kamdbctl to set-up the database.

Regards,

Peter

On Fri, 2012-01-27 at 15:04 +0100, Vogt, Jonathan wrote:
Hi sorry,
I guess I just got mixed up with all the name, merges, forks and mailinglists...
As I started out with openser, tried kamailio and just compiled opensips, I would appreaciate a working sample for openser or kamailio aswell.
I just need a sip server with presence support for bravis... which for itself does not seem to support server side presence...
Thanks
Jonathan



Von: sr-users-bounces@lists.sip-router.org [mailto:sr-users-bounces@lists.sip-router.org] Im Auftrag von Carsten Bock
Gesendet: Freitag, 27. Januar 2012 14:55
An: SIP Router - Kamailio (OpenSER) and SIP Express Router (SER) - UsersMailing List
Betreff: Re: [SR-Users] Sample pua_usrloc Config Was: Enableapplication/pidf+xml



Hi,


this is the wrong mailing list:
This Mailinglist is about OpenSER (the original), Kamailio, SER and sip-router.org - not OpenSIPS.
If you have problems with an OpenSIPS configuration or module, please post it to the OpenSIPS-list.


We can only provide help for our modules.


Thank you,
Carsten

2012/1/27 Vogt, Jonathan <J.Vogt@swp.de>
Hello,
could anyone kindly send me a working config which does support clients that not support server presence or send me a link to a working sample configuration. I seem unable to produce a working config myself.
    I have take the source from opensips.org and compiled it.
    Taken the conf from http://www.opensips.org/Resources/PuaUsrlocConfig replaced sip domain and ip and enabled auth
    Reset DB and created users
    Replaced X-LITE in conf with BRAVIS useragent.
    Tested and did not work...
    undid step 4 and used X-LITE 4 for test... did not work either.
I'm lost here. Any help appreciated.
Thanks
Jonathan



Von: sr-users-bounces@lists.sip-router.org [mailto:sr-users-bounces@lists.sip-router.org] Im Auftrag von Peter Dunkley
Gesendet: Donnerstag, 26. Januar 2012 15:38
An: SIP Router "- Kamailio (OpenSER) and SIP Express Router (SER) -Users Mailing "List
Betreff: Re: [SR-Users] Enable application/pidf+xml



Hello,

I think that force_active affects the state of the SUBSCRIBE dialogs.  So, a presentity does not have to explicitly authorise a watcher.  This is not the same as automatically PUBLISH'ing presence state.  I don't believe force_active will do what you want here as it has nothing to do with the body of the NOTIFY, just the Subscription-State: SIP header.

Also, I think the problem could be that X-Lite supports peer-to-peer presence (where the clients exchange SUBSCRIBEs and NOTIFYs) but does not support server presence (where the SUBSCRIBEs are from the client to the server, NOTIFYs are from the server to the client, and the client must PUBLISH to the server).

If you want the server to automatically PUBLISH for a client that does not support server presence (so online when you REGISTER and offline when you un-REGISTER) take a look a pua_usrloc.

Regards,

Peter


-- 
Peter Dunkley
Technical Director
Crocodile RCS Ltd

_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users





--
Carsten Bock
CEO (Geschäftsführer)

ng-voice GmbH
Schomburgstr. 80
D-22767 Hamburg / Germany

http://www.ng-voice.com
mailto:carsten@ng-voice.com

Mobile +49 179 2021244
Office +49 40 34927219
Fax +49 40 34927220

Sitz der Gesellschaft: Hamburg
Registergericht: Amtsgericht Hamburg, HRB 120189
Geschäftsführer: Carsten Bock
Ust-ID: DE279344284

Hier finden Sie unsere handelsrechtlichen Pflichtangaben:
http://www.ng-voice.com/imprint/

_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

-- 
Peter Dunkley
Technical Director
Crocodile RCS Ltd