On 1/28/10 6:44 AM, Eric Hiller wrote:
Thanks much! Got it all running once I loaded pv.so
welcome! You can create a new wiki page explaining what this config offers and posting it there:
http://www.kamailio.org/dokuwiki/doku.php/cfg-scripts-bank:main-index

It is easy to reference later to others.

Cheers,
Daniel


Just in case it helps anyone else out; here is my final config:
#
# switch.5+diag
# same script, bug with diagnostic printouts; run with:
# /usr/local/sbin/openser -f /usr/local/etc/openser/openser.cfg.diag
#
# ----------- global configuration parameters ------------------------

debug=3
#fork=yes
#log_stderror=no
children=4

# Uncomment these lines to enter debugging mode
#debug=10
fork=no
log_stderror=yes
listen=xxx
#

port=5060

# ------------------ module loading ----------------------------------

#set module path
mpath="/usr/local/lib/kamailio/modules/"

loadmodule "sl.so"
loadmodule "maxfwd.so"
loadmodule "enum.so"
loadmodule "pv.so"
loadmodule "textops.so"

#for diagnostic purposes
loadmodule "mi_fifo.so"
loadmodule "xlog.so"

# ----------------- setting module-specific parameters ---------------

#for diagnostic purposes
modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo")

modparam("enum", "domain_suffix", "xxx")

# -------------------------  request routing logic -------------------

# main routing logic
# ------------------
route{
        # initial checks
        if (!mf_process_maxfwd_header("10")) {
                sl_send_reply("483","Too Many Hops");
                exit;
        };
        if (msg:len >=  2048 ) {
                sl_send_reply("513", "Message too big");
                exit;
        };

        xlog("valid received to=<$ru> from=<$fu>\n");

        # ENUM :: makes uri E164; then checks enum
        subst_user('/;(.*)$//');
        if(enum_query()){
                xlog("ENUM to <$ru>\n");
                forward();
                exit;
        }
        # GATEWAY :: forwards all valid unknowns to the gateway
        if(is_from_user_enum()){
                xlog("SENT TO GATEWAY\n");
                $ruri.domain = "xxx";
                forward();
        } else {
                xlog("FROM USER NOT IN ENUM\n");
        }
}



Date: Wed, 27 Jan 2010 21:36:00 +0100
From: miconda@gmail.com
To: mrraptor98@hotmail.com
CC: klaus.mailinglists@pernau.at; users@lists.kamailio.org
Subject: Re: [Kamailio-Users] isup in invite

Hello,

On 1/27/10 7:50 PM, Eric Hiller wrote:
Klaus,

Thanks for the help, I am working on getting 1.5 installed now as this functionality isn't available in 1.2 it would appear. In 1.5 I am getting an error for my code:
$ruri.domain = "216.82.224.202";
forward();
Which worked fine in 1.2, but does not in 1.5. What would be the equivalent config for 1.5?

have you loaded the pv.so module? In 1.5.0 and greater most of pseudo-variables are implemented in pv module. instead of $ruri.domain you can use the shorter version $rd.

Cheers,
Daniel


For the enum side I would do:
enum_pv_query("{s.select,$ruri,;}");

If I did textops then it would be:
subst_user('/;(.*)$//');
Correct?

Thanks again!
-Eric

> Date: Sat, 16 Jan 2010 10:51:59 +0100
> From: klaus.mailinglists@pernau.at
> To: mrraptor98@hotmail.com
> CC: users@lists.kamailio.org
> Subject: Re: [Kamailio-Users] isup in invite
>
> Hi ERic!
>
> The ENUM lookup is done with the complete userpart. In your case you
> have to parse the E164 number manually.
>
> You can do this for example with string transformations: e.g.
> http://www.kamailio.org/dokuwiki/doku.php/transformations:1.5.x#sselect_index_separator
>
> Then use enum_pv_function() with the pseudo variable (pv) holding the
> parsed number.
> http://kamailio.org/docs/modules/1.5.x/enum#id2467740
>
>
> regards
> klaus
>
> Eric Hiller wrote:
> > I have an issue where my sip endpoint is sending ISUP information in the
> > invite. IE: sip:+1xxxxxxxxxx;npdi=yes;cic=+1-0110@xxxx:5060 and when I
> > run the enum query I am getting:
> > 0(24410) enum_query(): uri user is not an E164 number
> >
> > This is most likely due to the fact that
> > $rU=+17794294010;npdi=yes;cic=+1-0110
> >
> > Does openser not read the user properly? Is there a way to correct this?
> >
> > I am running openser 1.2.2 notls
> >
> > Thanks for any help!
> > -Eric
> >
> > ------------------------------------------------------------------------
> > Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. Sign up
> > now. <http://clk.atdmt.com/GBL/go/196390709/direct/01/>
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > Kamailio (OpenSER) - Users mailing list
> > Users@lists.kamailio.org
> > http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
> > http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
>
>
> _______________________________________________
> Kamailio (OpenSER) - Users mailing list
> Users@lists.kamailio.org
> http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
> http://lists.openser-project.org/cgi-bin/mailman/listinfo/users


Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. Sign up now.
_______________________________________________ Kamailio (OpenSER) - Users mailing list Users@lists.kamailio.org http://lists.kamailio.org/cgi-bin/mailman/listinfo/users http://lists.openser-project.org/cgi-bin/mailman/listinfo/users

-- 
Daniel-Constantin Mierla
* http://www.asipto.com/
  


Hotmail: Free, trusted and rich email service. Get it now.
_______________________________________________ Kamailio (OpenSER) - Users mailing list Users@lists.kamailio.org http://lists.kamailio.org/cgi-bin/mailman/listinfo/users http://lists.openser-project.org/cgi-bin/mailman/listinfo/users

-- 
Daniel-Constantin Mierla
* http://www.asipto.com/