Hi,

 

when i reboot the machine, it starts with 32Mb and i do not understand why...

so, does it use a startup file that i am not familiar with?

what is the appropriate runlevel? how do i set it and where?

 

thanks,

Uri

 

 

>Hi Sammy,
>
>When you use the init script, it is starting Kamailio with the correct
>arguments to get the environment you wish (-m 2048 probably). If however,
>you just call kamailio these args are not there. Im not sure why you are
>running with kamailio command directly. Why don't you add your init script
>to the appropriate runlevel for auto startup?
>
>Cheers
>Jason

On Wed, Feb 1, 2012 at 3:06 PM, Uri Shacked <ushacked at gmail.com> wrote:

> Hi again....
>
> i installed kamailio 3.2.2 today.
> i used the chkconfig tool to get kamailio run at boot.
> i edited both /etc/init.d/kamailio and /etc/default/kamailio files to run
> with 2048Mg of memory.
> now, when i run /etc/init.d/kamailio start, it starts with the right
> amount of memory.
> when i rum "kamailio" only, it starts with 32Mb....
>
>  i use centos 6.2 64bit.
> any ideas?
>
>
>
>
>
> On Tue, Oct 25, 2011 at 1:18 PM, Uri Shacked <ushacked at gmail.com> wrote:
>
>> Hi.
>> I already checked it all. The kamailio start and stop command did not
>> work. The init script i used was for debian. Now i use another script,
>> for centos. It works. I add the kamailio proccess with chkconfig tool.
>> Thanks.
>>
>> On 10/25/11, Sammy Govind <govoiper at gmail.com> wrote:
>> > Thanks Alex,
>> >
>> > Hey Uri, can you check if you've /etc/init.d/kamailio file exists - open
>> > that file if exists and cross verify few parameters.
>> > Few of these are as follows
>> >
>> > PATH=/sbin:/bin:/usr/sbin:/usr/bin
>> > DAEMON=*/usr/local/sbin/kamailio*
>> > NAME=kamailio
>> > DESC=kamailio
>> > HOMEDIR=/var/run/
>> > *PIDFILE*=$HOMEDIR/$NAME.pid
>> > DEFAULTS=*/etc/default/kamailio.default*
>>  > RUN_KAMAILIO=yes
>> >
>> > Make sure /etc/default/kamailio.default file exits. here are the
>> contents of
>> > my file.
>> >
>> > RUN_KAMAILIO=yes
>> > USER=kamailio
>> > GROUP=kamailio
>> > MEMORY=64
>> > DUMP_CORE=no
>> >
>> > On Tue, Oct 25, 2011 at 3:38 AM, Klaus Darilion <
>> > klaus.mailinglists at pernau.at> wrote:
>> >
>> >> Test the startupscript if they work:
>> >>
>> >> /etc/init.d/kamailio start
>> >> /etc/init.d/kamailio stop
>> >>
>> >> If this works, then make sure to have proper symlinks from the
>> >> corresponding runlevel to the startup script. Do it manually or use the
>> >> chkconfig tool.
>> >>
>> >> klaus
>> >>
>> >>
>> >> On 24.10.2011 08:00, Uri Shacked wrote:
>> >>
>> >>> hi again,
>> >>> i found out that on my centos 5.4 the command start-stop-daemon that
>> the
>> >>> /etc/init.d/kamailio uses is not recognized.
>> >>> it is kamailio3.2 any ideas?
>> >>>
>> >>>
>> >>> On Mon, Oct 24, 2011 at 3:03 PM, Uri Shacked <ushacked at gmail.com
>> >>> <mailto:ushacked at gmail.com>> wrote:
>> >>>
>> >>>    Hi,
>> >>>    what is the best way to start kamailio at boot?
>> >>>    the example in the install is not working for me....
>> >>>
>> >>>