[root@crm ser]# more ser.cfg
#
# $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $
#
# simple quick-start config script
#

# ----------- global configuration parameters ------------------------

#debug=3 # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no # (cmd line: -E)

/* Uncomment these lines to enter debugging mode
fork=no
log_stderror=yes
*/

check_via=no    # (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
#port=5060
#children=4
fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"

loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

modparam("usrloc", "db_mode", 0)

# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)

# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)

# ------------------------- request routing logic -------------------

# main routing logic

route{

        # initial sanity checks -- messages with
        # max_forwards==0, or excessively long requests
        if (!mf_process_maxfwd_header("10")) {
                sl_send_reply("483","Too Many Hops");
                break;
        };
        if (msg:len >= 2048 ) {
                sl_send_reply("513", "Message too big");
                break;
        };

        # we record-route all messages -- to make sure that
        # subsequent messages will go through our proxy; that's
        # particularly good if upstream and downstream entities
        # use different transport protocol
        if (!method=="REGISTER") record_route();

        # subsequent messages withing a dialog should take the
        # path determined by record-routing
        if (loose_route()) {
                # mark routing logic in request
                append_hf("P-hint: rr-enforced\r\n");
                route(1);
                break;
        };

        if (!uri==myself) {
                # mark routing logic in request
                append_hf("P-hint: outbound\r\n");
                route(1);
                break;
        };

        # if the request is for other domain use UsrLoc
        # (in case, it does not work, use the following command
        # with proper names and addresses in it)
        if (uri==myself) {

if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication
                        if (!www_authorize("balajimail.com", "subscriber")) {
                                www_challenge(" balajimail.com", "0");
                                break;
                        };

                        save("location");
                        break;
                };

                lookup("aliases");
                if (!uri==myself) {
                        append_hf("P-hint: outbound alias\r\n");
                        route(1);
                        break;
                };

                # native SIP destinations are handled using our USRLOC DB
                if (!lookup("location")) {
                        sl_send_reply("404", "Not Found");
                        break;
                };
        };
        append_hf("P-hint: usrloc applied\r\n");
        route(1);
}

route[1]
{
        # send it out now; use stateful forwarding as it works reliably
        # even for UDP2TCP
        if (!t_relay()) {
                sl_reply_error();
        };
}

[root@crm ser]#

On 5/7/06, Andrey Kouprianov <andrey.kouprianov@gmail.com> wrote:

Hi,

Looks like you have problem with your ser.cfg. Send it as attachment
in your next mail, so that someone can help finding faults in it.

Btw, you can try doing it yourself. For instance,

May  7 20:35:05 crm ser: parse error (90,20-21): Can't set module parameter

means that you have an error at line 90, characters 20 thorugh 21.

  Regards.

On 5/7/06, ram <talk2ram@gmail.com> wrote:
>
> Hi
>
> I have installed 0.9.6 on my FC5 Server
>
> iam able to compile there is no errors
>
> when i try to start SER
>
> ERROR; bad config file ( 6 errors)
>
> iam getting this errors in message
>
> May  7 20:35:05 crm ser: set_mod_param_regex: parameter <db_url> not found
> in module <uri>
> May  7 20:35:05 crm ser: parse error (69,4-5): Can't set module parameter
> May  7 20:35:05 crm ser: set_mod_param_regex: parameter <db_flag> not found
> in module <acc>
> May  7 20:35:05 crm ser: parse error (89,20-21): Can't set module parameter
> May  7 20:35:05 crm ser: set_mod_param_regex: parameter <db_missed_flag> not
> found in module <acc>
> May  7 20:35:05 crm ser: parse error (90,20-21): Can't set module parameter
> May  7 20:35:05 crm ser: parse error (119,14-21): syntax error
> May  7 20:35:05 crm ser: parse error (119,22-23): bad arguments
> May  7 20:35:05 crm ser: parse error (413,24-25): unknown command, missing
> loadmodule?
>
> any help will be great
>
> ram
> _______________________________________________
> Serusers mailing list
> Serusers@iptel.org
> http://mail.iptel.org/mailman/listinfo/serusers
>
>
>

_______________________________________________
Serusers mailing list
serusers@lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers