Kamailio is upgraded.
Check old config at kamailio.rpmsave

ср, 8 авг. 2018 г., 10:02 Ginhoux, Patrick <patrick.ginhoux@fr.unisys.com>:

Sergey,

 

I have successfully downloaded the new stream for 5.0.7 that is now 5.0.7-7 (previously 5.0.7-1).

 

Then after restoring my Kamailio server before the initial upgrade with 5.0.7-1, I have upgraded it with the 5.0.7-7 packages.

Now there is no more dependencies with the mod_perl package (good job) but only with the kamailio-ims package I’ve already seen:

 

[root@vm-siprouter74 kamailio-5.0.7-7]# ll

total 5484

-rw------- 1 root root 5368448 Aug  7 21:05 kamailio-5.0.7-7.el7.x86_64.rpm

-rw------- 1 root root   75208 Aug  7 21:05 kamailio-mysql-5.0.7-7.el7.x86_64.rpm

-rw------- 1 root root   81516 Aug  7 21:05 kamailio-perl-5.0.7-7.el7.x86_64.rpm

-rw------- 1 root root   84096 Aug  7 21:05 kamailio-snmpstats-5.0.7-7.el7.x86_64.rpm

 

[root@vm-siprouter74 kamailio-5.0.7-7]# rpm -Uvh *

warning: kamailio-5.0.7-7.el7.x86_64.rpm: Header V3 DSA/SHA1 Signature, key ID 941fdbdd: NOKEY

error: Failed dependencies:

        libkamailio_ims.so.0()(64bit) is needed by kamailio-5.0.7-7.el7.x86_64

 

Adding the kamailio-ims-5.0.7-7.el7 package get rid of this :

 

[root@vm-siprouter74 kamailio-5.0.7-7]# rpm -Uvh *

warning: kamailio-5.0.7-7.el7.x86_64.rpm: Header V3 DSA/SHA1 Signature, key ID 941fdbdd: NOKEY

Preparing...                          ################################# [100%]

Updating / installing...

   1:kamailio-ims-5.0.7-7.el7         ################################# [ 11%]

   2:kamailio-5.0.7-7.el7             warning: /etc/kamailio/kamailio.cfg created as /etc/kamailio/kamailio.cfg.rpmnew

warning: /etc/kamailio/kamctlrc created as /etc/kamailio/kamctlrc.rpmnew

################################# [ 22%]

   3:kamailio-mysql-5.0.7-7.el7       ################################# [ 33%]

   4:kamailio-perl-5.0.7-7.el7        ################################# [ 44%]

   5:kamailio-snmpstats-5.0.7-7.el7   ################################# [ 56%]

Cleaning up / removing...

   6:kamailio-snmpstats-5.0.1-1.1     ################################# [ 67%]

   7:kamailio-perl-5.0.1-1.1          ################################# [ 78%]

   8:kamailio-mysql-5.0.1-1.1         ################################# [ 89%]

   9:kamailio-5.0.1-1.1               warning: /etc/rc.d/init.d/kamailio saved as /etc/rc.d/init.d/kamailio.rpmsave

################################# [100%]

warning: /etc/default/kamailio saved as /etc/default/kamailio.rpmsave

 

Any comments on this upgrade and the kamailio-ims dependencies?

 

 

Cordialement.

Patrick GINHOUX

Unisys | +33 1 46 69 52 12 | +33 6 60 32 24 74 | patrick.ginhoux@unisys.com

 

De : sr-users <sr-users-bounces@lists.kamailio.org> De la part de Sergey Safarov
Envoyé : mardi 7 août 2018 18:38


À : Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>
Objet : Re: [SR-Users] Questions about changes between 5.0.1 and 5.0.7

 

We still have not resolved issue with RPM build service.

 

вт, 7 авг. 2018 г. в 17:30, Ginhoux, Patrick <patrick.ginhoux@fr.unisys.com>:

Sergey,

 

Good to know that mistake and that there is a fixed. Do you know if there is a new Kamailio-perl rpm available ?

 

Cordialement.

Patrick GINHOUX

Unisys | +33 1 46 69 52 12 | +33 6 60 32 24 74 | patrick.ginhoux@unisys.com

 

De : sr-users <sr-users-bounces@lists.kamailio.org> De la part de Sergey Safarov
Envoyé : mardi 7 août 2018 13:51


À : Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>
Objet : Re: [SR-Users] Questions about changes between 5.0.1 and 5.0.7

 

Typo

 

Correct 

mod_perl and mod_perl-devel dependency is added by mistake. PR is fixed this

About package moving between repos please ask RHEL support team. RHEL is drives this process.

 

Sergey.

 

вт, 7 авг. 2018 г. в 14:49, Sergey Safarov <s.safarov@gmail.com>:

I mod_perl and mod_perl-devel dependency is added by mistake. PR is fixed this

About package moving between repos please as RHEL support team. RHEL is drives this process.

 

Sergey.

вт, 7 авг. 2018 г. в 14:43, Ginhoux, Patrick <patrick.ginhoux@fr.unisys.com>:

Hi Sergey,

 

Thanks for the link that shows the mod_perl use.

 

But I’m interested to understand why such change between the 5.0.1 and 5.0.7 level. And also why the use of mod_perl which is removed from official distro.

 

Cordialement.

Patrick GINHOUX

Unisys | +33 1 46 69 52 12 | +33 6 60 32 24 74 | patrick.ginhoux@unisys.com

 

De : sr-users <sr-users-bounces@lists.kamailio.org> De la part de Sergey Safarov
Envoyé : mardi 7 août 2018 11:37
À : Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>
Objet : Re: [SR-Users] Questions about changes between 5.0.1 and 5.0.7

 

Hello Patrick

Please review packaging PR https://github.com/kamailio/kamailio/pull/1615

вт, 7 авг. 2018 г. в 9:52, Ginhoux, Patrick <patrick.ginhoux@fr.unisys.com>:

Hi,

 

Following a problem with the kamcmd htable.reload with Kamailio 5.0.1 (see related thread for this), I have upgraded to the 5.0.7 level (with some difficulties due to my specific environment).

My server runs the RHEL 7.4 distribution.

 

Now the upgrade is complete, I notice that that are changes not really documented:

 

-          The kamailio-perl-5.0.7-1.el7.x86_64.rpm requires to install the mod_perl module that doesn’t exist anymore in RHEL 7. It needs to be installed from the EPEL repository

-          The init script for kamailio has been changed from the old method to the fully compliant method for system unit for RHEL 7 for example:

 

With the 5.0.1 level we have the “/etc/rc.d/init.d/kamailio”

With the 5.0.7 level we have now the “/usr/lib/systemd/system/kamailio.service”

 

So my questions/comments are :

 

-          Why the mod_perl module is required between 5.0.1 and 5.0.7  (question posted in the attached message) ?

-          In the previous kamailo init script, I added a condition to start MySQL before kamailio by adding this entry in the script : # Required-Start: $syslog $network $mysqld

The new script contains the After command :

[Unit]

Description=Kamailio (OpenSER) - the Open Source SIP Server

After=network.target

 

Should I change the After line with this : After=network.target mysql.target to have the same condition?

 

In all the cases, some documentation must be changed to provide more details.

 

Thanks in advance for the answers.

 

Cordialement.

Patrick GINHOUX

 

_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users