Hello all,
I'm trying to configure the LCR module, but I'm running into a little problem, I don't get any errors but it is not routing the call properly, this is my lcr info:
openserctl lcr show
database engine 'MYSQL' loaded
Control engine 'FIFO' loaded
lcr routes
+----+--------+----------+--------+----------+
| id | prefix | from_uri | grp_id | priority |
+----+--------+----------+--------+----------+
| 1 | 001 | | 1 | 1 |
+----+--------+----------+--------+----------+
lcr gateway groups
+--------+----------+
| grp_id | grp_name |
+--------+----------+
| 1 | GWs |
+--------+----------+
lcr gateways
+---------+---------------+------+------------+-----------+--------+-------+---------------+
| gw_name | ip_addr | port | uri_scheme | transport | grp_id | strip | prefix |
+---------+---------------+------+------------+-----------+--------+-------+---------------+
| USA | 1.2.3.4 | 5060 | 1 | 1 | 1 | 2 | 99 |
+---------+---------------+------+------------+-----------+--------+-------+---------------+
I'm sending the following call:
Jun 14 07:49:31 rgi-sip /sbin/openser[9458]: DBG:core:parse_msg: SIP Request:
Jun 14 07:49:31 rgi-sip /sbin/openser[9458]: DBG:core:parse_msg: method: <INVITE>
Jun 14 07:49:31 rgi-sip /sbin/openser[9458]: DBG:core:parse_msg: uri: <sip:0013058883456@9.8.7.6:5060>
Jun 14 07:49:31 rgi-sip /sbin/openser[9458]: DBG:core:parse_msg: version: <SIP/2.0>
my script says:
# routing to the public network
if (!load_gws()) {
xlog("L_INFO","LCR: Unable to load gateways");
sl_send_reply("503", "Unable to load gateways");
exit;
}else{
xlog("L_INFO","LCR: Sending to $td\n");
}
if(!next_gw()){
sl_send_reply("503", "Unable to find a gateway");
exit;
}
t_on_failure("2");
if (!t_relay()) {
sl_reply_error();
};
exit;
On the syslog i get the message:
LCR: Sending to 9.8.7.6 <-- This, although the IP is wrong, I KNOW it didn't fail loading the gateways...
where 9.8.7.6 if my sever's IP.
Why is it not matching?
Thanks a lot
David