-----Original Message-----
From: Vitor Brasileiro [mailto:vitorbrasileiromail@yahoo.com.br]
Sent: Sábado, 18 de Diciembre de 2004 12:58 p.m.
To: Amozurrutia Jesus; serusers@lists.iptel.org
Subject: Re: [Serusers] Backup GW

Thank u Jesus, it worked.

Now, I have another question. How I set the failure timeout. It's taking too much tike to send to the secondary GW.

 

Vitor Brasileiro

----- Original Message -----

From: Amozurrutia Jesus

To: Vitor Brasileiro ; serusers@lists.iptel.org

Sent: Friday, December 17, 2004 10:38 PM

Subject: RE: [Serusers] Backup GW

I'm using something like this:

 

######################################################################
# Route to main Gateway
######################################################################
route[1] {
 rewritehost("Main.Gateway.IP.Address");
 t_on_failure("1");
 t_relay();
}

 

######################################################################
# Route to secondary Mex. PSTN Gateway
######################################################################
failure_route[1] {
 log(1,"Main Gw failed or is busy. Trying secondary.\n");
 rewritehost("Second.Gateway.IP.Address");
 append_branch();
 t_relay();
}

 

Call will be routed to the second gateway if the first gateway is busy or down.

Does anybody know a method for load balancong?

 

Regards,

Jesus

 

-----Original Message-----
From: Vitor Brasileiro [mailto:vitorbrasileiromail@yahoo.com.br]
Sent: Viernes, 17 de Diciembre de 2004 06:27 p.m.
To: serusers@lists.iptel.org
Subject: [Serusers] Backup GW

Hi list,

 

My SER sends to a specific GW all the external calls, but I intend to have a secondary (backup) GW to terminate those calls would't be completed for some reason.

Does nbody knows how?

 

Thanks,

Vitor Brasileiro.