Hi Daniel,
 
Thanks for you reply , Yes we indeed do use powerful hardware configuration server ,and we would tune to (centos) OS limits. There are many good blogs available on kamailio for high throughput and performance, we refer the same . One of them is https://github.com/kamailio/kamailio/blob/master/doc/tutorials/tcp_tunning.txt

Thanks again. 
Warm Regards 
Pintu





On Wed, Feb 27, 2019, 7:36 PM Daniel-Constantin Mierla <miconda@gmail.com> wrote:

Hello,

there were companies that pushed hundred thousands of active tls connections to same kamailio and it went fine. You will have to do some tuning to kamailio params as well as to the operating system limits, but if you have powerful hardware, having such number of active tls connections should be fine.

Cheers,
Daniel

On 27.02.19 11:30, Pintu Lohar wrote:
Hi Yasin, 
Not yet tested, My bad - it's 0.1 million with TLS but yes we are yet to test ), We need to distribute the users to different Kamailio cluster through API server. However, Would like to try Option 2 as well and test with it. 

Regards 
Pintu Lohar 

On Wed, Feb 27, 2019 at 7:16 PM YASIN CANER <caner_yaso@hotmail.com> wrote:
Hello Pintu

1 million TLS user? Have u ever test with tester on Kamailio ?Because I remembered in sr-mails that an user tested on 1000 client on TLS transport , it consumes so much CPU etc . I guess 1 milliyonTLSUser make big impact your system for all registration/call.

I tested option-2 for relaying registers about 1-2 years ago for proof of concept. It works fine.

you can replicate user location data by Dmq_usrloc module and can use path header then build a triangle topology to bridge calls. 
Or
You can build a Location Information service to find which kamailio  has UAC data .

Best Regards.

Yasin CANER


From: Pintu Lohar <pintulohargcetts@gmail.com>
Sent: Wednesday, February 27, 2019 12:27 PM
To: YASIN CANER
Cc: Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] Kamailio behind NAT or With Public IP - Which one is highly recommended
 
Hi Yasin, 
Thanks indeed for your valuable input for the active-active cluster(Option-1) &  Option-2

We definitely would like to try setting up an active-active cluster for the next phase if not in current phase.
But In order to use  Kamailio in the active-active cluster,  I think we need to forward or replicate registration to both the active-active server?
in order to proxy the invite packet through the server where the UA is registered?  

We use the following use cases   : 
1. We use FCM and APNS push to wake up the app.
2. Multi forking / Late forking cases are also involved.
3. Using Kamailio as a stateful proxy.

Thanks & Regards 
Pintu 

On Wed, Feb 27, 2019 at 3:10 PM YASIN CANER <caner_yaso@hotmail.com> wrote:
Hello,

My suggestion is that stay away from NAT if you dont have to. various  sip client/Firewalls make out troubles for registration and invites,  even if Kamailio can handle it.  If you have a high load TLS connection / subscriber , I think you should use load balancer and NAT options.

For example;
1 - Load balancer like F5  that balancing your connection active-active Kamailios 


UAC ----> F5 ------> Kamailio -1 (advertises public IP)
                   |
                    ------->  Kamailio -2 (advertises public IP)

2- Use kamailio as MultiHomed that convert transport layer to tcp/udp

UAC ---------> Kamailio(TLS-PUBLIC IP-mhomed) ------->  Kamailio-1(TCP/UDP)
                                                                                  |
                                                                                   ---------> Kamailio-2(TCP/UDP)


Good luck

Yasin CANER


From: sr-users <sr-users-bounces@lists.kamailio.org> on behalf of Pintu Lohar <pintulohargcetts@gmail.com>
Sent: Tuesday, February 26, 2019 8:09 AM
To: sr-users@lists.kamailio.org
Subject: [SR-Users] Kamailio behind NAT or With Public IP - Which one is highly recommended
 
Hi Everyone, 

Which one among the below option is highly recommended for setting up Kamailio (for production)
  1.  Kamailio behind NAT or 
   2. Setting up Kamailio using public IP?

 are there any disadvantages if we setup Kamailio behind NAT and use advertise option in listen parameters?

We have tested both the options, and both the options work great for us( a. Kamailio behind NAT with advertising in listen parameters b.Kamailio setup with public IP).  So wondering which one is best and highly recommended? 

Some extra info :
1. We use TLS
2. Using coturn for media 
 
Thanks
Pintu 

_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- 
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio World Conference - May 6-8, 2019 -- www.kamailioworld.com
Kamailio Advanced Training - Mar 4-6, 2019 in Berlin; Mar 25-27, 2019, in Washington, DC, USA -- www.asipto.com