It's a guide, not a complete solution. Look into RTPEngine, encryption of RTP.

On Fri, Oct 2, 2020 at 11:15 AM Andy Kama <andyvoicetek@gmail.com> wrote:
how would i add that though? as i dont see any mention of it in the guide 

On Fri, Oct 2, 2020 at 4:11 PM Sergiu Pojoga <pojogas@gmail.com> wrote:
Totally overlooked the lack of SAVP profile. Bastian is right, that's problem #1, then there's #2 and counting, lol

Good luck.

On Fri, Oct 2, 2020 at 11:02 AM Bastian Triller <bastian.triller@gmail.com> wrote:
there are no crypto attributes and SAVP profile in SDP. Direct Routing requires SRTP.

Check the Reason header in response. Sometimes, there are useful hints, why your request is not accepted.

On Fri, Oct 2, 2020 at 4:55 PM Sergiu Pojoga <pojogas@gmail.com> wrote:
Why do you double RR if your Kam listens only on tls 5061? Your topology isn't the same as in the skalatan tutorial.

Also, your Kam VIA contains IP address. Try to make it FQDN by setting an alias to your listen directive, e.g.:
listen=tls:YOURIP:5061 advertise "FQDN":5061

On Fri, Oct 2, 2020 at 10:31 AM Andy Kama <andyvoicetek@gmail.com> wrote:
see traces attached

just blacked out my ips
but scenario is softphone --- freeswitch --- kamailio ---- teams


On Fri, Oct 2, 2020 at 3:16 PM Sergiu Pojoga <pojogas@gmail.com> wrote:
relevant config snippets, kam logs, sip traces, all you've got?

For all we know - service unavailable could be anything, e.g. your O365 tenant is misconfigured.

On Fri, Oct 2, 2020 at 9:32 AM Andy Kama <andyvoicetek@gmail.com> wrote:
well not sure what else to send as i followed the link exactly

hence why i was asking if anyone has had that issue previously

On Fri, Oct 2, 2020 at 2:11 PM Sergiu Pojoga <pojogas@gmail.com> wrote:
> Can anyone guide me what I am doing wrong? 

Easy. You assume people on this mailing list are clairvoyants.

On Fri, Oct 2, 2020 at 7:18 AM Andy Kama <andyvoicetek@gmail.com> wrote:
Hi All,

I have done all the changes to get teams working according to 

but i find when i send a call to teams they send a response back with service unavailable.

Can anyone guide me what I am doing wrong?

I have added the record route and confirm it is being sent

My setup is freeswitch -- kamailio --- teams



_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users