Hi,

In the documentation I read the following for "ds_ping_reply_codes":

"Please note that the response codes the module accepts as valid reply to the PING-Method are not only the ones generated from the remote servers, but also those that are generated locally. E.g.: setting code=408 or class=400 will never set a backend down even if it is, because internally the Kamailio transaction layer generates a 408 in the case of no response from the remote server, and this internal code 408 is accepted as valid value"

Then I can see you set class=4 which probably collides with the above statement.

Try removing the class=4 and give it a try. If it works, you can set specific 4xx codes afterwards(if needed).

---
Stefan

On Tue, May 30, 2017 at 4:49 PM, Jean Cérien <cerien.jean@gmail.com> wrote:

Hello

I am working with Kamailio 5.0 dispatcher module. I am aiming at having two or more gateways receiving the traffic with load balancing, and when one fails, that the traffic is distributed among others. Currently, testing with 2 gw.

I see the options message going out (and not being answered). When I monitor with kamctl dispatcher dump, I never see the faulty gw going inactive (flags remain AP), and calls are still tried to the faulty gw.

"Best" result so far is with ds_probing_mode=1, the flags start at AX with both gateway up, then AP once they've replied to an OPTIONS, and even if I stop one, and OPTIONS is no longer replied, it stays at AP. when a call comes through, it is tried on this GW (3 invites), and then fails onto the other one. I was expecting that the gw would not be tried if inactive.

Am I missing something ?

J.

modparam("dispatcher", "db_url", DBURL)
modparam("dispatcher", "table_name", "dispatcher")
modparam("dispatcher", "flags", 2)
modparam("dispatcher", "dst_avp", "$avp(AVP_DST)")
modparam("dispatcher", "grp_avp", "$avp(AVP_GRP)")
modparam("dispatcher", "cnt_avp", "$avp(AVP_CNT)")
modparam("dispatcher", "sock_avp", "$avp(AVP_SOCK)")
modparam("dispatcher", "ds_ping_method", "OPTIONS")
modparam("dispatcher", "ds_ping_from", "sip:probe@probe")
modparam("dispatcher", "ds_ping_reply_codes", "class=2;class=3;class=4;class=5")
modparam("dispatcher", "ds_ping_interval", 30)
modparam("dispatcher", "ds_probing_mode", 1)
modparam("dispatcher", "ds_probing_threshold", 3)
modparam("dispatcher", "ds_timer_mode", 1)


_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users