Hi Gustavo,


This part would answer on OPTIONS if all conditions where true. 

The "and have NOT Uri with something for and after an @" surpress the option reply. 

So you can remove that or build an own OPTIONS related stuff in your config. 


       if (uri==$ru) {
                if ((method==OPTIONS) && (! uri=~"sip:.*[@]+.*")) {
                        options_reply();
                }
        }

Gustavo A. M. <gustavo@memorea.com> schrieb am Sa., 9. Nov. 2019, 23:45:
Greetings,

I'm trying to configure kamailio to get OPTIONS response, but it does
not working properly.
After a successful REGISTER, I send OPTIONS first time, get Proxy-
Authenticate header to calculate Proxy-Authorization, and resend
OPTIONS with Proxy-Authenticate header, but server follows answering
with a 407 response, apparently ignoring Proxy-Authenticate.
Note that same password is used in REGISTER request, and first time
REGISTER response with a 401, not a 407 response.

I think messages sent from client are right, and problem is on the
server configuration.

Follow messages and kamailio.cfg.

Thanks in advance,


Gustavo Adolfo Moennich


OPTIONS sip:6000@kamailio.memorea.com SIP/2.0
Call-ID: A6DB9DCAA18049E784034FB6F5F95680
Contact: <sip:6000@kamailio.memorea.com>
Content-Length: 0
CSeq: 0 OPTIONS
Expires: 20
From: "Bob" <sip:6000@kamailio.memorea.com>;tag=0B3D2156FF9E46DAAD7FC43
B62C9E2FC
Max-Forwards: 70
To: "Bob" <sip:6000@kamailio.memorea.com>
User-Agent: Memorea 1.0 (SIP 2.0) Build 1.1.1.0,  Windows x64 Build
6.1.7601
Via: SIP/2.0/UDP 192.168.122.21:5060;rport=58905


SIP/2.0 407 Proxy Authentication Required
Call-ID: A6DB9DCAA18049E784034FB6F5F95680
CSeq: 0 OPTIONS
From: "Bob" <sip:6000@kamailio.memorea.com>;tag=0B3D2156FF9E46DAAD7FC43
B62C9E2FC
To: "Bob" <sip:6000@kamailio.memorea.com>;tag=9dd61ff61e802d8e2bef5f146
21ef3c2.467d
Via: SIP/2.0/UDP
192.168.122.21:5060;rport=58905;received=192.168.122.12
Proxy-Authenticate: Digest realm="kamailio.memorea.com",
nonce="Xcc1wV3HNJXdfUDchNlEUkT6kHCtqBAn"
Server: kamailio (5.2.1 (x86_64/linux))
Content-Length: 0


OPTIONS sip:6000@kamailio.memorea.com SIP/2.0
Call-ID: A6DB9DCAA18049E784034FB6F5F95680
Contact: <sip:6000@kamailio.memorea.com>
Content-Length: 0
CSeq: 1 OPTIONS
Expires: 20
From: "Bob" <sip:6000@kamailio.memorea.com>;tag=0B3D2156FF9E46DAAD7FC43
B62C9E2FC
Max-Forwards: 70
Proxy-Authorization: Digest uri=sip:6000@kamailio.memorea.com,nonce="Xc
c1wV3HNJXdfUDchNlEUkT6kHCtqBAn",realm="kamailio.memorea.com",response="
5bcd184eea53284f3ec548c2412ce36a",username=6000
To: "Bob" <sip:6000@kamailio.memorea.com>
User-Agent: Memorea 1.0 (SIP 2.0) Build 1.1.1.0,  Windows x64 Build
6.1.7601
Via: SIP/2.0/UDP 192.168.122.21:5060;rport=58905



SIP/2.0 407 Proxy Authentication Required
Call-ID: A6DB9DCAA18049E784034FB6F5F95680
CSeq: 1 OPTIONS
From: "Bob" <sip:6000@kamailio.memorea.com>;tag=0B3D2156FF9E46DAAD7FC43
B62C9E2FC
To: "Bob" <sip:6000@kamailio.memorea.com>;tag=9dd61ff61e802d8e2bef5f146
21ef3c2.32de
Via: SIP/2.0/UDP
192.168.122.21:5060;received=192.168.122.12;rport=58905
Proxy-Authenticate: Digest realm="kamailio.memorea.com",
nonce="Xcc1xl3HNJqRobJFuZggPSGvNdtp+GnP"
Server: kamailio (5.2.1 (x86_64/linux))
Content-Length: 0


kamailio.cfg content's:

#!KAMAILIO
#!define WITH_MYSQL
#!define WITH_AUTH
#!define WITH_USRLOCDB
#
# Kamailio (OpenSER) SIP Server v5.2 - default configuration script
#     - web: https://www.kamailio.org
#     - git: https://github.com/kamailio/kamailio
#
# Direct your questions about this file to: <sr-users@lists.kamailio.or
g>
#
# Refer to the Core CookBook at https://www.kamailio.org/wiki/
# for an explanation of possible statements, functions and parameters.
#
# Note: the comments can be:
#     - lines starting with #, but not the pre-processor directives,
#       which start with #!, like #!define, #!ifdef, #!endif, #!else,
#!trydef,
#       #!subst, #!substdef, ...
#     - lines starting with //
#     - blocks enclosed in between /* */
#
# Several features can be enabled using '#!define WITH_FEATURE'
directives:
#
# *** To run in debug mode:
#     - define WITH_DEBUG
#
# *** To enable mysql:
#     - define WITH_MYSQL
#
# *** To enable authentication execute:
#     - enable mysql
#     - define WITH_AUTH
#     - add users using 'kamctl'
#
# *** To enable IP authentication execute:
#     - enable mysql
#     - enable authentication
#     - define WITH_IPAUTH
#     - add IP addresses with group id '1' to 'address' table
#
# *** To enable persistent user location execute:
#     - enable mysql
#     - define WITH_USRLOCDB
#
# *** To enable presence server execute:
#     - enable mysql
#     - define WITH_PRESENCE
#
# *** To enable nat traversal execute:
#     - define WITH_NAT
#     - install RTPProxy: http://www.rtpproxy.org
#     - start RTPProxy:
#        rtpproxy -l _your_public_ip_ -s udp:localhost:7722
#     - option for NAT SIP OPTIONS keepalives: WITH_NATSIPPING
#
# *** To enable PSTN gateway routing execute:
#     - define WITH_PSTN
#     - set the value of pstn.gw_ip
#     - check route[PSTN] for regexp routing condition
#
# *** To enable database aliases lookup execute:
#     - enable mysql
#     - define WITH_ALIASDB
#
# *** To enable speed dial lookup execute:
#     - enable mysql
#     - define WITH_SPEEDDIAL
#
# *** To enable multi-domain support execute:
#     - enable mysql
#     - define WITH_MULTIDOMAIN
#
# *** To enable TLS support execute:
#     - adjust CFGDIR/tls.cfg as needed
#     - define WITH_TLS
#
# *** To enable XMLRPC support execute:
#     - define WITH_XMLRPC
#     - adjust route[XMLRPC] for access policy
#
# *** To enable anti-flood detection execute:
#     - adjust pike and htable=>ipban settings as needed (default is
#       block if more than 16 requests in 2 seconds and ban for 300
seconds)
#     - define WITH_ANTIFLOOD
#
# *** To block 3XX redirect replies execute:
#     - define WITH_BLOCK3XX
#
# *** To block 401 and 407 authentication replies execute:
#     - define WITH_BLOCK401407
#
# *** To enable VoiceMail routing execute:
#     - define WITH_VOICEMAIL
#     - set the value of voicemail.srv_ip
#     - adjust the value of voicemail.srv_port
#
# *** To enhance accounting execute:
#     - enable mysql
#     - define WITH_ACCDB
#     - add following columns to database
#!ifdef ACCDB_COMMENT
  ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT '';
  ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT
'';
  ALTER TABLE acc ADD COLUMN src_ip varchar(64) NOT NULL default '';
  ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT '';
  ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT '';
  ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT
'';
  ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NOT NULL
DEFAULT '';
  ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128) NOT NULL
DEFAULT '';
  ALTER TABLE missed_calls ADD COLUMN src_ip varchar(64) NOT NULL
default '';
  ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) NOT NULL
DEFAULT '';
  ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR(64) NOT NULL
DEFAULT '';
  ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128) NOT NULL
DEFAULT '';
#!endif

####### Include Local Config If Exists #########
import_file "kamailio-local.cfg"

####### Defined Values #########

# *** Value defines - IDs used later in config
#!ifdef WITH_MYSQL
# - database URL - used to connect to database server by modules such
#       as: auth_db, acc, usrloc, a.s.o.
#!ifndef DBURL
#!define DBURL "mysql://kamailio:temp@database.memorea.com/kamailio"
#!endif
#!endif
#!ifdef WITH_MULTIDOMAIN
# - the value for 'use_domain' parameters
#!define MULTIDOMAIN 1
#!else
#!define MULTIDOMAIN 0
#!endif

# - flags
#   FLT_ - per transaction (message) flags
#       FLB_ - per branch flags
#!define FLT_ACC 1
#!define FLT_ACCMISSED 2
#!define FLT_ACCFAILED 3
#!define FLT_NATS 5

#!define FLB_NATB 6
#!define FLB_NATSIPPING 7

####### Global Parameters #########

### LOG Levels: 3=DBG, 2=INFO, 1=NOTICE, 0=WARN, -1=ERR
#!ifdef WITH_DEBUG
debug=4
log_stderror=yes
#!else
debug=2
log_stderror=no
#!endif

memdbg=5
memlog=5

log_facility=LOG_LOCAL0
log_prefix="{$mt $hdr(CSeq) $ci} "

/* number of SIP routing processes */
children=8

/* uncomment the next line to disable TCP (default on) */
# disable_tcp=yes

/* uncomment the next line to disable the auto discovery of local
aliases
 * based on reverse DNS on IPs (default on) */
# auto_aliases=no

/* add local domain aliases */
# alias="sip.mydomain.com"

/* uncomment and configure the following line if you want Kamailio to
 * bind on a specific interface/port/proto (default bind on all
available) */
# listen=udp:10.0.0.10:5060

#!ifdef WITH_TLS
enable_tls=yes
#!endif

/* life time of TCP connection when there is no traffic
 * - a bit higher than registration expires to cope with UA behind NAT
*/
tcp_connection_lifetime=3605

####### Custom Parameters #########

/* These parameters can be modified runtime via RPC interface
 * - see the documentation of 'cfg_rpc' module.
 *
 * Format: group.id = value 'desc' description
 * Access: $sel(cfg_get.group.id) or @cfg_get.group.id */

#!ifdef WITH_PSTN
/* PSTN GW Routing
 *
 * - pstn.gw_ip: valid IP or hostname as string value, example:
 * pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address"
 *
 * - by default is empty to avoid misrouting */
pstn.gw_ip = "" desc "PSTN GW Address"
pstn.gw_port = "" desc "PSTN GW Port"
#!endif

#!ifdef WITH_VOICEMAIL
/* VoiceMail Routing on offline, busy or no answer
 *
 * - by default Voicemail server IP is empty to avoid misrouting */
voicemail.srv_ip = "" desc "VoiceMail IP Address"
voicemail.srv_port = "5060" desc "VoiceMail Port"
#!endif

####### Modules Section ########

/* set paths to location of modules */
# mpath="/usr/lib/x86_64-linux-gnu/kamailio/modules/"

#!ifdef WITH_MYSQL
loadmodule "db_mysql.so"
#!endif

loadmodule "jsonrpcs.so"
loadmodule "kex.so"
loadmodule "corex.so"
loadmodule "tm.so"
loadmodule "tmx.so"
loadmodule "sl.so"
loadmodule "rr.so"
loadmodule "pv.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "siputils.so"
loadmodule "xlog.so"
loadmodule "sanity.so"
loadmodule "ctl.so"
loadmodule "cfg_rpc.so"
loadmodule "acc.so"
loadmodule "counters.so"

#!ifdef WITH_AUTH
loadmodule "auth.so"
loadmodule "auth_db.so"
#!ifdef WITH_IPAUTH
loadmodule "permissions.so"
#!endif
#!endif

#!ifdef WITH_ALIASDB
loadmodule "alias_db.so"
#!endif

#!ifdef WITH_SPEEDDIAL
loadmodule "speeddial.so"
#!endif

#!ifdef WITH_MULTIDOMAIN
loadmodule "domain.so"
#!endif

#!ifdef WITH_PRESENCE
loadmodule "presence.so"
loadmodule "presence_xml.so"
#!endif

#!ifdef WITH_NAT
loadmodule "nathelper.so"
loadmodule "rtpproxy.so"
#!endif

#!ifdef WITH_TLS
loadmodule "tls.so"
#!endif

#!ifdef WITH_ANTIFLOOD
loadmodule "htable.so"
loadmodule "pike.so"
#!endif

#!ifdef WITH_XMLRPC
loadmodule "xmlrpc.so"
#!endif

#!ifdef WITH_DEBUG
loadmodule "debugger.so"
#!endif

# ----------------- setting module-specific parameters ---------------


# ----- jsonrpcs params -----
modparam("jsonrpcs", "pretty_format", 1)
/* set the path to RPC fifo control file */
# modparam("jsonrpcs", "fifo_name",
"/var/run/kamailio/kamailio_rpc.fifo")
/* set the path to RPC unix socket control file */
# modparam("jsonrpcs", "dgram_socket",
"/var/run/kamailio/kamailio_rpc.sock")

# ----- ctl params -----
/* set the path to RPC unix socket control file */
# modparam("ctl", "binrpc", "unix:/var/run/kamailio/kamailio_ctl")

# ----- tm params -----
# auto-discard branches from previous serial forking leg
modparam("tm", "failure_reply_mode", 3)
# default retransmission timeout: 30sec
modparam("tm", "fr_timer", 30000)
# default invite retransmission timeout after 1xx: 120sec
modparam("tm", "fr_inv_timer", 120000)

# ----- rr params -----
# set next param to 1 to add value to ;lr param (helps with some UAs)
modparam("rr", "enable_full_lr", 0)
# do not append from tag to the RR (no need for this script)
modparam("rr", "append_fromtag", 0)

# ----- registrar params -----
modparam("registrar", "method_filtering", 1)
/* uncomment the next line to disable parallel forking via location */
# modparam("registrar", "append_branches", 0)
/* uncomment the next line not to allow more than 10 contacts per AOR
*/
# modparam("registrar", "max_contacts", 10)
/* max value for expires of registrations */
modparam("registrar", "max_expires", 3600)
/* set it to 1 to enable GRUU */
modparam("registrar", "gruu_enabled", 0)

# ----- acc params -----
/* what special events should be accounted ? */
modparam("acc", "early_media", 0)
modparam("acc", "report_ack", 0)
modparam("acc", "report_cancels", 0)
/* by default ww do not adjust the direct of the sequential requests.
 * if you enable this parameter, be sure the enable "append_fromtag"
 * in "rr" module */
modparam("acc", "detect_direction", 0)
/* account triggers (flags) */
modparam("acc", "log_flag", FLT_ACC)
modparam("acc", "log_missed_flag", FLT_ACCMISSED)
modparam("acc", "log_extra",
        "src_user=$fU;src_domain=$fd;src_ip=$si;"
        "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
modparam("acc", "failed_transaction_flag", FLT_ACCFAILED)
/* enhanced DB accounting */
#!ifdef WITH_ACCDB
modparam("acc", "db_flag", FLT_ACC)
modparam("acc", "db_missed_flag", FLT_ACCMISSED)
modparam("acc", "db_url", DBURL)
modparam("acc", "db_extra",
        "src_user=$fU;src_domain=$fd;src_ip=$si;"
        "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
#!endif

# ----- usrloc params -----
/* enable DB persistency for location entries */
#!ifdef WITH_USRLOCDB
modparam("usrloc", "db_url", DBURL)
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "use_domain", MULTIDOMAIN)
#!endif

# ----- auth_db params -----
#!ifdef WITH_AUTH
modparam("auth_db", "db_url", DBURL)
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "load_credentials", "")
modparam("auth_db", "use_domain", MULTIDOMAIN)

# ----- permissions params -----
#!ifdef WITH_IPAUTH
modparam("permissions", "db_url", DBURL)
modparam("permissions", "db_mode", 1)
#!endif

#!endif

# ----- alias_db params -----
#!ifdef WITH_ALIASDB
modparam("alias_db", "db_url", DBURL)
modparam("alias_db", "use_domain", MULTIDOMAIN)
#!endif

# ----- speeddial params -----
#!ifdef WITH_SPEEDDIAL
modparam("speeddial", "db_url", DBURL)
modparam("speeddial", "use_domain", MULTIDOMAIN)
#!endif

# ----- domain params -----
#!ifdef WITH_MULTIDOMAIN
modparam("domain", "db_url", DBURL)
/* register callback to match myself condition with domains list */
modparam("domain", "register_myself", 1)
#!endif

#!ifdef WITH_PRESENCE
# ----- presence params -----
modparam("presence", "db_url", DBURL)

# ----- presence_xml params -----
modparam("presence_xml", "db_url", DBURL)
modparam("presence_xml", "force_active", 1)
#!endif

#!ifdef WITH_NAT
# ----- rtpproxy params -----
modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722")

# ----- nathelper params -----
modparam("nathelper", "natping_interval", 30)
modparam("nathelper", "ping_nated_only", 1)
modparam("nathelper", "sipping_bflag", FLB_NATSIPPING)
modparam("nathelper", "sipping_from", "sip:pinger@kamailio.org")

# params needed for NAT traversal in other modules
modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)")
modparam("usrloc", "nat_bflag", FLB_NATB)
#!endif

#!ifdef WITH_TLS
# ----- tls params -----
modparam("tls", "config", "/etc/kamailio/tls.cfg")
#!endif

#!ifdef WITH_ANTIFLOOD
# ----- pike params -----
modparam("pike", "sampling_time_unit", 2)
modparam("pike", "reqs_density_per_unit", 16)
modparam("pike", "remove_latency", 4)

# ----- htable params -----
/* ip ban htable with autoexpire after 5 minutes */
modparam("htable", "htable", "ipban=>size=8;autoexpire=300;")
#!endif

#!ifdef WITH_XMLRPC
# ----- xmlrpc params -----
modparam("xmlrpc", "route", "XMLRPC");
modparam("xmlrpc", "url_match", "^/RPC")
#!endif

#!ifdef WITH_DEBUG
# ----- debugger params -----
modparam("debugger", "cfgtrace", 1)
modparam("debugger", "log_level_name", "exec")
#!endif

####### Routing Logic ########


/* Main SIP request routing logic
 * - processing of any incoming SIP request starts with this route
 * - note: this is the same as route { ... } */
request_route {

        # per request initial checks
        route(REQINIT);

        # NAT detection
        route(NATDETECT);

        # CANCEL processing
        if (is_method("CANCEL")) {
                if (t_check_trans()) {
                        route(RELAY);
                }
                exit;
        }

        # handle retransmissions
        if (!is_method("ACK")) {
                if(t_precheck_trans()) {
                        t_check_trans();
                        exit;
                }
                t_check_trans();
        }

        # handle requests within SIP dialogs
        route(WITHINDLG);

        ### only initial requests (no To tag)

        # authentication
        route(AUTH);

        # record routing for dialog forming requests (in case they are
routed)
        # - remove preloaded route headers
        remove_hf("Route");
        if (is_method("INVITE|SUBSCRIBE")) {
                record_route();
        }

        # account only INVITEs
        if (is_method("INVITE")) {
                setflag(FLT_ACC); # do accounting
        }

        # dispatch requests to foreign domains
        route(SIPOUT);

        ### requests for my local domains

        # handle presence related requests
        route(PRESENCE);

        # handle registrations
        route(REGISTRAR);

        if ($rU==$null) {
                # request with no Username in RURI
                sl_send_reply("484","Address Incomplete");
                exit;
        }

        # dispatch destinations to PSTN
        route(PSTN);

        # user location service
        route(LOCATION);
}

# Wrapper for relaying requests
route[RELAY] {

        # enable additional event routes for forwarded requests
        # - serial forking, RTP relaying handling, a.s.o.
        if (is_method("INVITE|BYE|SUBSCRIBE|UPDATE")) {
                if(!t_is_set("branch_route"))
t_on_branch("MANAGE_BRANCH");
        }
        if (is_method("INVITE|SUBSCRIBE|UPDATE")) {
                if(!t_is_set("onreply_route"))
t_on_reply("MANAGE_REPLY");
        }
        if (is_method("INVITE")) {
                if(!t_is_set("failure_route"))
t_on_failure("MANAGE_FAILURE");
        }

        if (!t_relay()) {
                sl_reply_error();
        }
        exit;
}

# Per SIP request initial checks
route[REQINIT] {
#!ifdef WITH_ANTIFLOOD
        # flood detection from same IP and traffic ban for a while
        # be sure you exclude checking trusted peers, such as pstn
gateways
        # - local host excluded (e.g., loop to self)
        if(src_ip!=$si) {
                if($sht(ipban=>$si)!=$null) {
                        # ip is already blocked
                        xdbg("request from blocked IP - $rm from $fu
(IP:$si:$sp)\n");
                        exit;
                }
                if (!pike_check_req()) {
                        xlog("L_ALERT","ALERT: pike blocking $rm from
$fu (IP:$si:$sp)\n");
                        $sht(ipban=>$si) = 1;
                        exit;
                }
        }
#!endif
        if($ua =~ "friendly-scanner|sipcli|VaxSIPUserAgent") {
                # silent drop for scanners - uncomment next line if
want to reply
                # sl_send_reply("200", "OK");
                exit;
        }

        if (!mf_process_maxfwd_header("10")) {
                sl_send_reply("483","Too Many Hops");
                exit;
        }

        if (uri==$ru) {
                if ((method==OPTIONS) && (! uri=~"sip:.*[@]+.*")) {
                        options_reply();
                }
        }

        if(!sanity_check("17895", "7")) {
                xlog("Malformed SIP message from $si:$sp\n");
                exit;
        }
}

# Handle requests within SIP dialogs
route[WITHINDLG] {
        if (!has_totag()) return;

        # sequential request withing a dialog should
        # take the path determined by record-routing
        if (loose_route()) {
                route(DLGURI);
                if (is_method("BYE")) {
                        setflag(FLT_ACC); # do accounting ...
                        setflag(FLT_ACCFAILED); # ... even if the
transaction fails
                } else if ( is_method("ACK") ) {
                        # ACK is forwarded statelessly
                        route(NATMANAGE);
                } else if ( is_method("NOTIFY") ) {
                        # Add Record-Route for in-dialog NOTIFY as per
RFC 6665.
                        record_route();
                }
                route(RELAY);
                exit;
        }

        if (is_method("SUBSCRIBE") && uri == $ru) {
                # in-dialog subscribe requests
                route(PRESENCE);
                exit;
        }
        if ( is_method("ACK") ) {
                if ( t_check_trans() ) {
                        # no loose-route, but stateful ACK;
                        # must be an ACK after a 487
                        # or e.g. 404 from upstream server
                        route(RELAY);
                        exit;
                } else {
                        # ACK without matching transaction ... ignore
and discard
                        exit;
                }
        }
        sl_send_reply("404","Not here");
        exit;
}

# Handle SIP registrations
route[REGISTRAR] {
        if (!is_method("REGISTER")) return;

        if(isflagset(FLT_NATS)) {
                setbflag(FLB_NATB);
#!ifdef WITH_NATSIPPING
                # do SIP NAT pinging
                setbflag(FLB_NATSIPPING);
#!endif
        }
        if (!save("location")) {
                sl_reply_error();
        }
        exit;
}

# User location service
route[LOCATION] {

#!ifdef WITH_SPEEDDIAL
        # search for short dialing - 2-digit extension
        if($rU=~"^[0-9][0-9]$") {
                if(sd_lookup("speed_dial")) {
                        route(SIPOUT);
                }
        }
#!endif

#!ifdef WITH_ALIASDB
        # search in DB-based aliases
        if(alias_db_lookup("dbaliases")) {
                route(SIPOUT);
        }
#!endif

        $avp(oexten) = $rU;
        if (!lookup("location")) {
                $var(rc) = $rc;
                route(TOVOICEMAIL);
                t_newtran();
                switch ($var(rc)) {
                        case -1:
                        case -3:
                                send_reply("404", "Not Found");
                                exit;
                        case -2:
                                send_reply("405", "Method Not
Allowed");
                                exit;
                }
        }

        # when routing via usrloc, log the missed calls also
        if (is_method("INVITE")) {
                setflag(FLT_ACCMISSED);
        }

        route(RELAY);
        exit;
}

# Presence server processing
route[PRESENCE] {
        if(!is_method("PUBLISH|SUBSCRIBE")) return;

        if(is_method("SUBSCRIBE") && $hdr(Event)=="message-summary") {
                route(TOVOICEMAIL);
                # returns here if no voicemail server is configured
                sl_send_reply("404", "No voicemail service");
                exit;
        }

#!ifdef WITH_PRESENCE
        if (!t_newtran()) {
                sl_reply_error();
                exit;
        }

        if(is_method("PUBLISH")) {
                handle_publish();
                t_release();
        } else if(is_method("SUBSCRIBE")) {
                handle_subscribe();
                t_release();
        }
        exit;
#!endif

        # if presence enabled, this part will not be executed
        if (is_method("PUBLISH") || $rU==$null) {
                sl_send_reply("404", "Not here");
                exit;
        }
        return;
}

# IP authorization and user authentication
route[AUTH] {
#!ifdef WITH_AUTH

#!ifdef WITH_IPAUTH
        if((!is_method("REGISTER")) && allow_source_address()) {
                # source IP allowed
                return;
        }
#!endif

        if (is_method("REGISTER") || from_uri==$fu) {
                # authenticate requests
                if (!auth_check("$fd", "subscriber", "1")) {
                        auth_challenge("$fd", "0");
                        exit;
                }
                # user authenticated - remove auth header
                if(!is_method("REGISTER|PUBLISH"))
                        consume_credentials();
        }

        if (is_method("OPTIONS") || from_uri==$fu) {
                # authenticate requests
                if (!auth_check("$fd", "subscriber", "1")) {
                        auth_challenge("$fd", "0");
                        exit;
                }
                # user authenticated - remove auth header
                if(!is_method("OPTIONS|PUBLISH"))
                        consume_credentials();
        }

        # if caller is not local subscriber, then check if it calls
        # a local destination, otherwise deny, not an open relay here
        if (from_uri!=$fu && uri!=$ru) {
                sl_send_reply("403","Not relaying");
                exit;
        }

#!else

        # authentication not enabled - do not relay at all to foreign
networks
        if(uri!=$ru) {
                sl_send_reply("403","Not relaying");
                exit;
        }

#!endif
        return;
}

# Caller NAT detection
route[NATDETECT] {
#!ifdef WITH_NAT
        force_rport();
        if (nat_uac_test("19")) {
                if (is_method("REGISTER")) {
                        fix_nated_register();
                } else {
                        if(is_first_hop()) {
                                set_contact_alias();
                        }
                }
                setflag(FLT_NATS);
        }
#!endif
        return;
}

# RTPProxy control and signaling updates for NAT traversal
route[NATMANAGE] {
#!ifdef WITH_NAT
        if (is_request()) {
                if(has_totag()) {
                        if(check_route_param("nat=yes")) {
                                setbflag(FLB_NATB);
                        }
                }
        }
        if (!(isflagset(FLT_NATS) || isbflagset(FLB_NATB))) return;

        if(nat_uac_test("8")) {
                rtpproxy_manage("co");
        } else {
                rtpproxy_manage("cor");
        }

        if (is_request()) {
                if (!has_totag()) {
                        if(t_is_branch_route()) {
                                add_rr_param(";nat=yes");
                        }
                }
        }
        if (is_reply()) {
                if(isbflagset(FLB_NATB)) {
                        if(is_first_hop())
                                set_contact_alias();
                }
        }
#!endif
        return;
}

# URI update for dialog requests
route[DLGURI] {
#!ifdef WITH_NAT
        if(!isdsturiset()) {
                handle_ruri_alias();
        }
#!endif
        return;
}

# Routing to foreign domains
route[SIPOUT] {
        if (uri==$ru) return;

        append_hf("P-hint: outbound\r\n");
        route(RELAY);
        exit;
}

# PSTN GW routing
route[PSTN] {
#!ifdef WITH_PSTN
        # check if PSTN GW IP is defined
        if (strempty($sel(cfg_get.pstn.gw_ip))) {
                xlog("SCRIPT: PSTN routing enabled but pstn.gw_ip not
defined\n");
                return;
        }

        # route to PSTN dialed numbers starting with '+' or '00'
        #     (international format)
        # - update the condition to match your dialing rules for PSTN
routing
        if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$")) return;

        # only local users allowed to call
        if(from_uri!=$fu) {
                sl_send_reply("403", "Not Allowed");
                exit;
        }

        # normalize target number for pstn gateway
        # - convert leading 00 to +
        if (starts_with("$rU", "00")) {
                strip(2);
                prefix("+");
        }

        if (strempty($sel(cfg_get.pstn.gw_port))) {
                $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip);
        } else {
                $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip) +
":"
                                        + $sel(cfg_get.pstn.gw_port);
        }

        route(RELAY);
        exit;
#!endif

        return;
}

# XMLRPC routing
#!ifdef WITH_XMLRPC
route[XMLRPC] {
        # allow XMLRPC from localhost
        if ((method=="POST" || method=="GET")
                        && (src_ip==127.0.0.1)) {
                # close connection only for xmlrpclib user agents
(there is a bug in
                # xmlrpclib: it waits for EOF before interpreting the
response).
                if ($hdr(User-Agent) =~ "xmlrpclib")
                        set_reply_close();
                set_reply_no_connect();
                dispatch_rpc();
                exit;
        }
        send_reply("403", "Forbidden");
        exit;
}
#!endif

# Routing to voicemail server
route[TOVOICEMAIL] {
#!ifdef WITH_VOICEMAIL
        if(!is_method("INVITE|SUBSCRIBE")) return;

        # check if VoiceMail server IP is defined
        if (strempty($sel(cfg_get.voicemail.srv_ip))) {
                xlog("SCRIPT: VoiceMail routing enabled but IP not
defined\n");
                return;
        }
        if(is_method("INVITE")) {
                if($avp(oexten)==$null) return;

                $ru = "sip:" + $avp(oexten) + "@" +
$sel(cfg_get.voicemail.srv_ip)
                                + ":" +
$sel(cfg_get.voicemail.srv_port);
        } else {
                if($rU==$null) return;

                $ru = "sip:" + $rU + "@" +
$sel(cfg_get.voicemail.srv_ip)
                                + ":" +
$sel(cfg_get.voicemail.srv_port);
        }
        route(RELAY);
        exit;
#!endif

        return;
}

# Manage outgoing branches
branch_route[MANAGE_BRANCH] {
        xdbg("new branch [$T_branch_idx] to $ru\n");
        route(NATMANAGE);
}

# Manage incoming replies
onreply_route[MANAGE_REPLY] {
        xdbg("incoming reply\n");
        if(status=~"[12][0-9][0-9]") {
                route(NATMANAGE);
        }
}

# Manage failure routing cases
failure_route[MANAGE_FAILURE] {
        route(NATMANAGE);

        if (t_is_canceled()) exit;

#!ifdef WITH_BLOCK3XX
        # block call redirect based on 3xx replies.
        if (t_check_status("3[0-9][0-9]")) {
                t_reply("404","Not found");
                exit;
        }
#!endif

#!ifdef WITH_BLOCK401407
        # block call redirect based on 401, 407 replies.
        if (t_check_status("401|407")) {
                t_reply("404","Not found");
                exit;
        }
#!endif

#!ifdef WITH_VOICEMAIL
        # serial forking
        # - route to voicemail on busy or no answer (timeout)
        if (t_check_status("486|408")) {
                $du = $null;
                route(TOVOICEMAIL);
                exit;
        }
#!endif
}

_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users