Hello,

the async task workers are in recvfom(), which should not increase any load.

Do you have any chance to test on another os/version? Maybe on centos 7 and see if it is the same case?

Cheers,
Daniel

Hello again,

I attached a new file.

The interesting part is that Kamailio does not load the CPU at all. Top shows it at the bottom. Only the "load average" value gets increased.

Thank you!

пн, 25 трав. 2020 о 16:34 Daniel-Constantin Mierla <miconda@gmail.com> пише:

Hello,

can you install the package with kamailio debugging symbols? Then take again the kamctl trap with two async workers, it should contain more details about what pieces of code run.

The package should be named like kamailio-dbg...

Besides that, can you also do a 'top' and see what kamailio processes (their PIDs) eat a lot of cpu?

Cheers,
Daniel

On 25.05.20 11:05, Володимир Іванець wrote:

Hello,

Attached are two files. One for 2 Async Task Workers and one for 8 Workers. The second one was stuck and did not complete.

I should point out that the virtual machine has 2 CPU cores. Load average value was stable with 2 workers and was slowly increasing after adding more workers. * workers caused it to increase very fast.

Thank you!

пт, 22 трав. 2020 о 22:00 Daniel-Constantin Mierla <miconda@gmail.com> пише:

Hello,

if you can, it would be interesting to get the backtrace and see what was causing the load.

Iirc, the Async Task Worker should wait on read on an internal socket, so it should be no CPU used when nothing is transmitted to this type of workers.

Cheers,
Daniel

On 22.05.20 19:20, Володимир Іванець wrote:

Hello Daniel,

Thank you for your response.

I run kamctl trap command but the procedure got stuck. Last line in the generated file contained "---start 12767 -----".  12767 was an Async Task Worker. Since I don't need them I just removed related configuration. It must be left after the testing. This solved the problem.

Please let me know if you are still interested in what was going on and if I should restore the configuration and run kamctl trap again.

Thank you very much!

пт, 22 трав. 2020 о 19:10 Daniel-Constantin Mierla <miconda@gmail.com> пише:

Hello,

install gdb and, when the load is high, run:

kamctl trap

It write a file with what kamailio was doing at that moment. Send it over here on mailing list or make it available for download somewhere. We can look at it and guide further about what can be done.

Cheers,
Daniel

On 22.05.20 16:53, Володимир Іванець wrote:

Hello everyone!

I'm running Kamailio version 5.3.3 on a CentOS 6. I started noticing that "load average" value increases rapidly with the start of Kamailio:

# uptime

17:47:52 up 4 days, 17:47,  3 users,  load average: 7.02, 7.01, 6.02

It will start to decrease immediately after Kamailio is stopped.

Does anyone know what could cause this and how to troubleshoot it?

Thank you!

_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

-- 
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Funding: https://www.paypal.me/dcmierla

-- 
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Funding: https://www.paypal.me/dcmierla

-- 
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Funding: https://www.paypal.me/dcmierla

-- 
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Funding: https://www.paypal.me/dcmierla