We have tried all of your suggestions, but still not getting any light changes on the watcher.
The basic problem seems to be that the watched phone sends PUBLISH packets to the server, but the server does not send NOTIFY packets to the watcher phone.
We are seeing the following error in the logs every time the watched phone changes status:

DEBUG: presence [notify.c:1263]: publ_notify(): Could not find subs_dialog

We are running Kam 4.4.2

If anybody has any ideas what could be causing this, let me know.


Thanks in advance, Bill



For completeness, here is our config file:

#!define WITH_MYSQL
#!define WITH_AUTH
#!define WITH_USRLOCDB
#define WITH_ANTIFLOOD
#!define WITH_PRESENCE
#!define WITH_VOICEMAIL
#!define WITH_DEBUG
#!define WITH_NAT
#!KAMAILIO
#
# Kamailio (OpenSER) SIP Server v4.4 - default configuration script
#     - web: http://www.kamailio.org
#     - git: http://sip-router.org
#
# Direct your questions about this file to: <sr-users@lists.sip-router.org>
#
# Refer to the Core CookBook at http://www.kamailio.org/wiki/
# for an explanation of possible statements, functions and parameters.
#
# Several features can be enabled using '#!define WITH_FEATURE' directives:
#
# *** To run in debug mode:
#     - define WITH_DEBUG
#
# *** To enable mysql:
#     - define WITH_MYSQL
#
# *** To enable authentication execute:
#     - enable mysql
#     - define WITH_AUTH
#     - add users using 'kamctl'
#
# *** To enable IP authentication execute:
#     - enable mysql
#     - enable authentication
#     - define WITH_IPAUTH
#     - add IP addresses with group id '1' to 'address' table
#
# *** To enable persistent user location execute:
#     - enable mysql
#     - define WITH_USRLOCDB
#
# *** To enable presence server execute:
#     - enable mysql
#     - define WITH_PRESENCE
#
# *** To enable nat traversal execute:
#     - define WITH_NAT
#     - install RTPProxy: http://www.rtpproxy.org
#     - start RTPProxy:
#        rtpproxy -l _your_public_ip_ -s udp:localhost:7722
#     - option for NAT SIP OPTIONS keepalives: WITH_NATSIPPING
#
# *** To enable PSTN gateway routing execute:
#     - define WITH_PSTN
#     - set the value of pstn.gw_ip
#     - check route[PSTN] for regexp routing condition
#
# *** To enable database aliases lookup execute:
#     - enable mysql
#     - define WITH_ALIASDB
#
# *** To enable speed dial lookup execute:
#     - enable mysql
#     - define WITH_SPEEDDIAL
#
# *** To enable multi-domain support execute:
#     - enable mysql
#     - define WITH_MULTIDOMAIN
#
# *** To enable TLS support execute:
#     - adjust CFGDIR/tls.cfg as needed
#     - define WITH_TLS
#
# *** To enable XMLRPC support execute:
#     - define WITH_XMLRPC
#     - adjust route[XMLRPC] for access policy
#
# *** To enable anti-flood detection execute:
#     - adjust pike and htable=>ipban settings as needed (default is
#       block if more than 16 requests in 2 seconds and ban for 300 seconds)
#     - define WITH_ANTIFLOOD
#
# *** To block 3XX redirect replies execute:
#     - define WITH_BLOCK3XX
#
# *** To enable VoiceMail routing execute:
#     - define WITH_VOICEMAIL
#     - set the value of voicemail.srv_ip
#     - adjust the value of voicemail.srv_port
#
# *** To enhance accounting execute:
#     - enable mysql
#     - define WITH_ACCDB
#     - add following columns to database
#!ifdef ACCDB_COMMENT
  ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT '';
  ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT '';
  ALTER TABLE acc ADD COLUMN src_ip varchar(64) NOT NULL default '';
  ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT '';
  ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT '';
  ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT '';
  ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT '';
  ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT '';
  ALTER TABLE missed_calls ADD COLUMN src_ip varchar(64) NOT NULL default '';
  ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT '';
  ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT '';
  ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT '';
#!endif

####### Include Local Config If Exists #########
import_file "kamailio-local.cfg"

####### Defined Values #########

# *** Value defines - IDs used later in config
#!ifdef WITH_MYSQL
# - database URL - used to connect to database server by modules such
#       as: auth_db, acc, usrloc, a.s.o.
#!ifndef DBURL
#!define DBURL "mysql://kamailio:kam@@userrw@sql9.telopar.net/kamailio"
#!endif
#!endif
#!ifdef WITH_MULTIDOMAIN
# - the value for 'use_domain' parameters
#!define MULTIDOMAIN 1
#!else
#!define MULTIDOMAIN 0
#!endif

# - flags
#   FLT_ - per transaction (message) flags
#    FLB_ - per branch flags
#!define FLT_ACC 1
#!define FLT_ACCMISSED 2
#!define FLT_ACCFAILED 3
#!define FLT_NATS 5
#!define FLT_DLG 9
#!define FLT_DLGINFO 10
#!define FLB_NATB 6
#!define FLB_NATSIPPING 7

####### Global Parameters #########

### LOG Levels: 3=DBG, 2=INFO, 1=NOTICE, 0=WARN, -1=ERR
#!ifdef WITH_DEBUG
debug=6
log_stderror=no
#!else
debug=-1
log_stderror=no
#!endif

memdbg=5
memlog=5

log_facility=LOG_LOCAL0

# number of SIP routing processes
children=8

/* uncomment the next line to disable TCP (default on) */
disable_tcp=yes

/* uncomment the next line to disable the auto discovery of local aliases
   based on reverse DNS on IPs (default on) */
#auto_aliases=no

/* add local domain aliases */
#alias="sip.mydomain.com"

/* uncomment and configure the following line if you want Kamailio to
   bind on a specific interface/port/proto (default bind on all available) */

listen=udp:<kamail;io server IP>:5020

/* port to listen to */
#port=5060
#port=5020

#!ifdef WITH_TLS
enable_tls=yes
#!endif

# life time of TCP connection when there is no traffic
# - a bit higher than registration expires to cope with UA behind NAT
tcp_connection_lifetime=3605

####### Custom Parameters #########

# These parameters can be modified runtime via RPC interface
# - see the documentation of 'cfg_rpc' module.
#
# Format: group.id = value 'desc' description
# Access: $sel(cfg_get.group.id) or @cfg_get.group.id
#

#!ifdef WITH_PSTN
# PSTN GW Routing
#
# - pstn.gw_ip: valid IP or hostname as string value, example:
# pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address"
#
# - by default is empty to avoid misrouting
pstn.gw_ip = "" desc "PSTN GW Address"
pstn.gw_port = "" desc "PSTN GW Port"
#!endif

#!ifdef WITH_VOICEMAIL
# VoiceMail Routing on offline, busy or no answer
#
# - by default Voicemail server IP is empty to avoid misrouting
voicemail.srv_ip = "<asterisk server IP>" desc "VoiceMail IP Address"
voicemail.srv_port = "5060" desc "VoiceMail Port"
#!endif

####### Modules Section ########

# set paths to location of modules (to sources or installation folders)
#!ifdef WITH_SRCPATH
mpath="modules/"
#!else
mpath="/usr/local/lib64/kamailio/modules/"
#!endif

#!ifdef WITH_MYSQL
loadmodule "db_mysql.so"
#!endif

loadmodule "mi_fifo.so"
loadmodule "kex.so"
loadmodule "corex.so"
loadmodule "tm.so"
loadmodule "tmx.so"
loadmodule "sl.so"
loadmodule "rr.so"
loadmodule "pv.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "siputils.so"
loadmodule "xlog.so"
loadmodule "sanity.so"
loadmodule "ctl.so"
loadmodule "cfg_rpc.so"
loadmodule "mi_rpc.so"
loadmodule "acc.so"
loadmodule "exec.so"
#!ifdef WITH_AUTH
loadmodule "auth.so"
loadmodule "auth_db.so"
#!ifdef WITH_IPAUTH
loadmodule "permissions.so"
#!endif
#!endif

#!ifdef WITH_ALIASDB
loadmodule "alias_db.so"
#!endif

#!ifdef WITH_SPEEDDIAL
loadmodule "speeddial.so"
#!endif

#!ifdef WITH_MULTIDOMAIN
loadmodule "domain.so"
#!endif



# ----- pua params -----
#modparam("pua", "db_url", DBURL)
#modparam("pua", "db_mode", 2)
#modparam("pua", "update_period", 60)
#modparam("pua", "dlginfo_increase_version", 0)
#modparam("pua", "reginfo_increase_version", 0)
#modparam("pua", "check_remote_contact", 1)
#modparam("pua", "fetch_rows", 1000)

#!ifdef WITH_NAT
loadmodule "nathelper.so"
loadmodule "rtpproxy.so"
#!endif

#!ifdef WITH_TLS
loadmodule "tls.so"
#!endif

#!ifdef WITH_ANTIFLOOD
loadmodule "htable.so"
loadmodule "pike.so"
#!endif

#!ifdef WITH_XMLRPC
loadmodule "xmlrpc.so"
#!endif

#!ifdef WITH_DEBUG
loadmodule "debugger.so"
#!endif
loadmodule "dialog.so"
#!ifdef WITH_PRESENCE

loadmodule "presence.so"
loadmodule "presence_xml.so"
loadmodule "presence_mwi.so"
loadmodule "presence_dialoginfo.so"
#loadmodule "presence_reginfo"
loadmodule "pua.so"
#loadmodule "pua_usrloc.so"
loadmodule "pua_dialoginfo.so"

#!endif
# ----------------- setting module-specific parameters ---------------


# ----- mi_fifo params -----
#modparam("mi_fifo", "fifo_name", "/var/run/kamailio/kamailio_fifo")

# ----- ctl params -----
#modparam("ctl", "binrpc", "unix:/var/run/kamailio/kamailio_ctl")

# ----- tm params -----
# auto-discard branches from previous serial forking leg
modparam("tm", "failure_reply_mode", 3)
# default retransmission timeout: 30sec
modparam("tm", "fr_timer", 30000)
# default invite retransmission timeout after 1xx: 120sec
modparam("tm", "fr_inv_timer", 120000)


# ----- rr params -----
# set next param to 1 to add value to ;lr param (helps with some UAs)
modparam("rr", "enable_full_lr", 0)
# do not append from tag to the RR (no need for this script)
modparam("rr", "append_fromtag", 0)


# ----- registrar params -----
modparam("registrar", "method_filtering", 1)
/* uncomment the next line to disable parallel forking via location */
# modparam("registrar", "append_branches", 0)
/* uncomment the next line not to allow more than 10 contacts per AOR */
#modparam("registrar", "max_contacts", 10)
# max value for expires of registrations
modparam("registrar", "max_expires", 3600)
# set it to 1 to enable GRUU
modparam("registrar", "gruu_enabled", 0)


# ----- acc params -----
/* what special events should be accounted ? */
modparam("acc", "early_media", 0)
modparam("acc", "report_ack", 0)
modparam("acc", "report_cancels", 0)
/* by default ww do not adjust the direct of the sequential requests.
   if you enable this parameter, be sure the enable "append_fromtag"
   in "rr" module */
modparam("acc", "detect_direction", 0)
/* account triggers (flags) */
modparam("acc", "log_flag", FLT_ACC)
modparam("acc", "log_missed_flag", FLT_ACCMISSED)
modparam("acc", "log_extra",
    "src_user=$fU;src_domain=$fd;src_ip=$si;"
    "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
modparam("acc", "failed_transaction_flag", FLT_ACCFAILED)
/* enhanced DB accounting */
#!ifdef WITH_ACCDB
modparam("acc", "db_flag", FLT_ACC)
modparam("acc", "db_missed_flag", FLT_ACCMISSED)
modparam("acc", "db_url", DBURL)
modparam("acc", "db_extra",
    "src_user=$fU;src_domain=$fd;src_ip=$si;"
    "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
#!endif


# ----- usrloc params -----
/* enable DB persistency for location entries */
#!ifdef WITH_USRLOCDB
modparam("usrloc", "db_url", DBURL)
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "use_domain", MULTIDOMAIN)
#!endif


# ----- auth_db params -----
#!ifdef WITH_AUTH
modparam("auth_db", "db_url", DBURL)
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "load_credentials", "")
modparam("auth_db", "use_domain", MULTIDOMAIN)

# ----- permissions params -----
#!ifdef WITH_IPAUTH
modparam("permissions", "db_url", DBURL)
modparam("permissions", "db_mode", 1)
#!endif

#!endif


# ----- alias_db params -----
#!ifdef WITH_ALIASDB
modparam("alias_db", "db_url", DBURL)
modparam("alias_db", "use_domain", MULTIDOMAIN)
#!endif


# ----- speeddial params -----
#!ifdef WITH_SPEEDDIAL
modparam("speeddial", "db_url", DBURL)
modparam("speeddial", "use_domain", MULTIDOMAIN)
#!endif


# ----- domain params -----
#!ifdef WITH_MULTIDOMAIN
modparam("domain", "db_url", DBURL)
# register callback to match myself condition with domains list
modparam("domain", "register_myself", 1)
#!endif


#!ifdef WITH_PRESENCE
# ----- presence params -----
modparam("presence", "db_url", DBURL)
modparam("presence", "server_address", "sip:<kamaiio server ip>:5020" )

#modparam("presence", "timeout_rm_subs", 0)
#modparam("presence", "send_fast_notify", 1)
modparam("presence", "db_update_period", 20)
modparam("presence", "clean_period", 60)
modparam("presence", "subs_db_mode", 2)
#modparam("presence", "fetch_rows", 1000)
modparam("presence", "max_expires", 14430) # PortaOne max call time (4 hours) plus a little

# ----- presence_xml params -----
modparam("presence_xml", "db_url", DBURL)
modparam("presence_xml", "force_active", 1)


# ----- presence_dialoginfo params -----
modparam("presence_dialoginfo", "force_single_dialog", 1)
#modparam("presence_dialoginfo", "force_dummy_dialog", 1)

# ----- pua params -----
modparam("pua", "db_url", DBURL)
modparam("pua", "db_mode", 2)
modparam("pua", "db_table", "pua")
modparam("pua", "update_period", 20)
modparam("pua", "outbound_proxy", "<Kamailio server ip>:5020")
modparam("pua", "dlginfo_increase_version", 0)
modparam("pua", "reginfo_increase_version", 0)
modparam("pua", "check_remote_contact", 1)
modparam("pua", "fetch_rows", 1000)


# ----- pua_dialoginfo params -----
modparam("pua_dialoginfo", "include_callid", 1)
modparam("pua_dialoginfo", "send_publish_flag", FLT_DLGINFO)
modparam("pua_dialoginfo", "caller_confirmed", 0)
modparam("pua_dialoginfo", "include_tags", 1)
#modparam("pua_dialoginfo", "override_lifetime", 11420)
modparam("pua_dialoginfo", "callee_trying", 1)

#!endif

# ----- dialog params -----
modparam("dialog", "db_url", DBURL)
modparam("dialog", "enable_stats", 1)
modparam("dialog", "db_mode", 1)
modparam("dialog", "dlg_flag", FLT_DLG)

#!ifdef WITH_NAT
# ----- rtpproxy params -----
modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722")

# ----- nathelper params -----
modparam("nathelper", "natping_interval", 30)
modparam("nathelper", "ping_nated_only", 1)
modparam("nathelper", "sipping_bflag", FLB_NATSIPPING)
modparam("nathelper", "sipping_from", "sip:pinger@kamailio.org")

# params needed for NAT traversal in other modules
modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)")
modparam("usrloc", "nat_bflag", FLB_NATB)
#!endif


#!ifdef WITH_TLS
# ----- tls params -----
modparam("tls", "config", "/usr/local/etc/kamailio/tls.cfg")
#!endif

#!ifdef WITH_ANTIFLOOD
# ----- pike params -----
modparam("pike", "sampling_time_unit", 2)
modparam("pike", "reqs_density_per_unit", 20)
modparam("pike", "remove_latency", 1)

# ----- htable params -----
# ip ban htable with autoexpire after 5 minutes
modparam("htable", "htable", "ipban=>size=8;autoexpire=300;")
#!endif

#!ifdef WITH_XMLRPC
# ----- xmlrpc params -----
modparam("xmlrpc", "route", "XMLRPC");
modparam("xmlrpc", "url_match", "^/RPC")
#!endif

#!ifdef WITH_DEBUG
# ----- debugger params -----
modparam("debugger", "cfgtrace", 1)
modparam("debugger", "log_level_name", "exec")
#!endif


####### Routing Logic ########


# Main SIP request routing logic
# - processing of any incoming SIP request starts with this route
# - note: this is the same as route { ... }
request_route {
    xlog("ENTER REQUEST ROUTE $rm -- $rb [$fu/$tu/$ru/$ci]\r\n\r\n");
   
    # per request initial checks
    route(REQINIT);

    # NAT detection
    route(NATDETECT);

    # CANCEL processing
    if (is_method("CANCEL")) {
        if (t_check_trans()) {
            route(RELAY);
        }
        exit;
    }

    # handle requests within SIP dialogs
    route(WITHINDLG);

    ### only initial requests (no To tag)

    # handle retransmissions
    if(t_precheck_trans()) {
        t_check_trans();
        exit;
    }
    t_check_trans();

    # authentication
    if (registered("location")) {
        xlog("AUTH IS REGISTER (IP:$si:$sp) $fu");
       
    } else {
        xlog("AUTH NOT REGISTER (IP:$si:$sp) $fu");
    };
        route(AUTH);
    # account only INVITEs
    if (is_method("INVITE")  ) {
        setflag(FLT_ACC); # do accounting
        xlog("ALL INVITES COME THROUGH HERE [$tU](IP:$si:$sp) $fu\r\n\r\n");
           
            if ($tU =~ 'NL'  ){
                xlog("FOUND NL IN INVITE [$tu](IP:$si:$sp) $fu\r\n\r\n");

                $avp(newtU) = $(tU{s.substr,2,0});
                xlog("THE NEW TU =  [$avp(newtU)]\r\n");
                $rU =$avp(newtU);

            }
       
       
    }

    #if (is_method("REGISTER")) {
    #    xlog("AUTH UNREGISTER (IP:$si:$sp) $fu");
    #}
    # record routing for dialog forming requests (in case they are routed)
    # - remove preloaded route headers
    remove_hf("Route");
    if (is_method("INVITE|SUBSCRIBE")) {
        xlog("SUBSCRIBE OR INVITE RECEIVED [$rm -- $tu]\n\r");
        #if($rm == "SUBSCRIBE"){
            #xlog("CHECKING MB STATE FOR NEW USER $tU");
            #exec_avp("/home/xantek/mwi_initial.php $tU");
        #}
        record_route();
    }

   


    # dispatch requests to foreign domains
    route(SIPOUT);

    ### requests for my local domains

    # handle presence related requests
    route(PRESENCE);

    # handle registrations
   
    route(REGISTRAR);

    if ($rU==$null) {
        # request with no Username in RURI
        sl_send_reply("484","Address Incomplete");
        exit;
    }

    # dispatch destinations to PSTN
    #route(PSTN);

    # user location service
    route(LOCATION);
}

# Wrapper for relaying requests
route[RELAY] {
    xlog("ROUTE RELAY [$ru] $rm\r\n\r\n");
    # enable additional event routes for forwarded requests
    # - serial forking, RTP relaying handling, a.s.o.
    if (is_method("INVITE|BYE|SUBSCRIBE|UPDATE")) {
        if(!t_is_set("branch_route")) t_on_branch("MANAGE_BRANCH");
    }
    if (is_method("INVITE|SUBSCRIBE|UPDATE")) {
        if(!t_is_set("onreply_route")) t_on_reply("MANAGE_REPLY");
    }
    if (is_method("INVITE")) {
        if(!t_is_set("failure_route")) t_on_failure("MANAGE_FAILURE");
    }

    if(is_method("INVITE|BYE|UPDATE|CANCEL|ACK")) {
        xlog("DIALOG $rm");
        setflag(FLT_DLGINFO);
        dlg_manage();
    }
   
    if (!t_relay()) {
        sl_reply_error();
    }
    exit;
}

# Per SIP request initial checks
route[REQINIT] {

#!ifdef WITH_ANTIFLOOD
    # flood detection from same IP and traffic ban for a while
    # be sure you exclude checking trusted peers, such as pstn gateways
    # - local host excluded (e.g., loop to self)
    if(src_ip!=myself) {
        if($sht(ipban=>$si)!=$null) {
            # ip is already blocked
            xdbg("request from blocked IP - $rm from $fu (IP:$si:$sp)\n");
            exit;
        }
        if (!pike_check_req()) {
            xlog("L_ALERT","ALERT: pike blocking $rm from $fu (IP:$si:$sp)\n");
            $sht(ipban=>$si) = 1;
            exit;
        }
    }
    if($ua =~ "friendly-scanner|sipcli") {
        # silent drop for scanners - uncomment next line if want to reply
        # sl_send_reply("200", "OK");
        exit;
    }
#!endif

    if (!mf_process_maxfwd_header("10")) {
        sl_send_reply("483","Too Many Hops");
        exit;
    }

    if(is_method("OPTIONS") && uri==myself && $rU==$null) {
        sl_send_reply("200","Keepalive");
        exit;
    }

    if(!sanity_check("1511", "7")) {
        xlog("Malformed SIP message from $si:$sp\n");
        exit;
    }
}

# Handle requests within SIP dialogs
route[WITHINDLG] {
    xlog("WITHINDLG $rm");
    if (!has_totag()) return;

    # sequential request withing a dialog should
    # take the path determined by record-routing
    if (loose_route()) {
        route(DLGURI);
        if (is_method("BYE")) {
            setflag(FLT_ACC); # do accounting ...
            setflag(FLT_ACCFAILED); # ... even if the transaction fails
        } else if ( is_method("ACK") ) {
            # ACK is forwarded statelessy
            route(NATMANAGE);
        } else if ( is_method("NOTIFY")  ) {
            xlog("FOUND NOTIFY [$tu](IP:$si:$sp) $fu\r\n\r\n");
            # Add Record-Route for in-dialog NOTIFY as per RFC 6665.
            record_route();
        }
        route(RELAY);
        exit;
    }

    if (is_method("SUBSCRIBE") && uri == myself) {
        # in-dialog subscribe requests
        route(PRESENCE);
        exit;
    }
    if ( is_method("ACK") ) {
        if ( t_check_trans() ) {
            # no loose-route, but stateful ACK;
            # must be an ACK after a 487
            # or e.g. 404 from upstream server
            route(RELAY);
            exit;
        } else {
            # ACK without matching transaction ... ignore and discard
            exit;
        }
    }
    sl_send_reply("404","Not here");
    exit;
}

# Handle SIP registrations
route[REGISTRAR] {
    if (!is_method("REGISTER")) return;
   
    xlog("REGISTER1 [$fu/$tu/$ru/$ci]");
    if(isflagset(FLT_NATS)) {
        setbflag(FLB_NATB);
#!ifdef WITH_NATSIPPING
        # do SIP NAT pinging
        setbflag(FLB_NATSIPPING);
#!endif
    }
   
    if (!save("location")) {
        sl_reply_error();
    }
   
    exit;
}

# User location service
route[LOCATION] {
xlog("CHECKING LOCATION $rm [$fu/$tu/$ru/$ci]");
#!ifdef WITH_SPEEDDIAL
    # search for short dialing - 2-digit extension
    if($rU=~"^[0-9][0-9]$") {
        if(sd_lookup("speed_dial")) {
            route(SIPOUT);
        }
    }
#!endif

#!ifdef WITH_ALIASDB
    # search in DB-based aliases
    if(alias_db_lookup("dbaliases")) {
        route(SIPOUT);
    }
#!endif

    $avp(oexten) = $rU;
    if (!lookup("location")) {
       
        $var(rc) = $rc;
        route(TOVOICEMAIL);
        t_newtran();
        switch ($var(rc)) {
            case -1:
            case -3:
                send_reply("404", "Not Found");
                exit;
            case -2:
                send_reply("405", "Method Not Allowed");
                exit;
        }
    }

    # when routing via usrloc, log the missed calls also
    if (is_method("INVITE")) {
        setflag(FLT_ACCMISSED);
    }

    route(RELAY);
    exit;
}

# Presence server processing
route[PRESENCE] {
    xlog("SUBSCRIBE ENTERING PRESENCE $rm $hdr(Event)");
    if(!is_method("PUBLISH|SUBSCRIBE")) return;

    if(is_method("SUBSCRIBE") && $hdr(Event)=="message-summary") {
        route(TOVOICEMAIL);
        xlog("MESSAGE RESULT [$fu/$tu/$ru/$ci]\r\n\r\n");
        # returns here if no voicemail server is configured
        sl_send_reply("404", "No voicemail service");
        exit;
    }

#!ifdef WITH_PRESENCE
    xlog("SUBSCRIBE IN PRESENCE $rm");
    if (!t_newtran()) {
        sl_reply_error();
        exit;
    }
    xlog("SUBSCRIBE2 IN PRESENCE $rm");
    if(is_method("PUBLISH")) {
        xlog("PUBLISH, NOT SUBSCRIBE [$fu/$tu/$ru/$ci] $hdr(Sender)\r\n\r\n");
        #exec_avp("/home/xantek/kamailio_test.php", "$avp(s:test)");
        #xlog("TEST RESULT [$avp(s:test)][$fu/$tu/$ru/$ci]\r\n\r\n");
       
        handle_publish();
        t_release();
    } else if(is_method("SUBSCRIBE")) {
        xlog("HANDLE SUBSCRIBE");

        xlog("SUBSCRIBE RESULT [$avp(s:test)][$fu/$tu/$ru/$ci]\r\n\r\n");
        handle_subscribe();
        t_release();
    }
    exit;
#!endif

    # if presence enabled, this part will not be executed
    if (is_method("PUBLISH") || $rU==$null) {
        sl_send_reply("404", "Not here");
        exit;
    }
    return;
}

# IP authorization and user authentication
route[AUTH] {
#!ifdef WITH_AUTH

#!ifdef WITH_IPAUTH
    if((!is_method("REGISTER")) && allow_source_address()) {
        # source IP allowed
        return;
    }
#!endif

    if (is_method("REGISTER") || from_uri==myself) {
        # authenticate requests
        #$var(auth_code) = auth_check("$fd", "subscriber", "1");
        #if ($var(auth_code) == -2) {xlog("AUTH BAD PASSWORD (IP:$si:$sp) $fu\r\n\r\n");}
        #if ($var(auth_code) == -3) {xlog("AUTH NO SUCH USER (IP:$si:$sp) $fu\r\n\r\n");}
        #if ($var(auth_code) == -5) {
        #    xlog("VALID REGISTRATION (IP:$si:$sp) $tU\r\n\r\n");
    #           
        #    exec_avp("/home/xantek/mwi_initial.php $tU");
        #}
    #    xlog("AUTH $var(auth_code) $fu (IP:$si:$sp)\r\n\r\n");
        if (!auth_check("$fd", "subscriber", "1")) {
            auth_challenge("$fd", "0");
            xlog("REGISTERUSER $fu (IP:$si:$sp)\r\n\r\n");
            exit;
        } else {
            xlog("REGISTERUSER NO AUTH CHECK");
        }
        $var(auth_code) = auth_check("$fd", "subscriber", "1");
        xlog("REGISTERUSER AUTH CODE = $var(auth_code)");
        if ($var(auth_code) == -2) {xlog("AUTH BAD PASSWORD (IP:$si:$sp) $fu\r\n\r\n");}
        if ($var(auth_code) == -3) {xlog("AUTH NO SUCH USER (IP:$si:$sp) $fu\r\n\r\n");}
       
        # user authenticated - remove auth header
       
        if(!is_method("REGISTER|PUBLISH"))
            xlog("REGISTERUSER CONSUME $fu IP:$si\r\n\r\n");
            consume_credentials();
    }
    # if caller is not local subscriber, then check if it calls
    # a local destination, otherwise deny, not an open relay here
    if (from_uri!=myself && uri!=myself) {
        sl_send_reply("403","Not relaying");
        exit;
    }

#!endif
    return;
}

# Caller NAT detection
route[NATDETECT] {
#!ifdef WITH_NAT
    force_rport();
    if (nat_uac_test("19")) {
        if (is_method("REGISTER")) {
            fix_nated_register();
        } else {
            if(is_first_hop()) {
                set_contact_alias();
            }
        }
        setflag(FLT_NATS);
    }
#!endif
    return;
}

# RTPProxy control and signaling updates for NAT traversal
route[NATMANAGE] {
#!ifdef WITH_NAT
    if (is_request()) {
        if(has_totag()) {
            if(check_route_param("nat=yes")) {
                setbflag(FLB_NATB);
            }
        }
    }
    if (!(isflagset(FLT_NATS) || isbflagset(FLB_NATB))) return;

    if(nat_uac_test("8")) {
        rtpproxy_manage("co");
    } else {
        rtpproxy_manage("cor");
    }

    if (is_request()) {
        if (!has_totag()) {
            if(t_is_branch_route()) {
                add_rr_param(";nat=yes");
            }
        }
    }
    if (is_reply()) {
        if(isbflagset(FLB_NATB)) {
            if(is_first_hop())
                set_contact_alias();
        }
    }
#!endif
    return;
}

# URI update for dialog requests
route[DLGURI] {
#!ifdef WITH_NAT
    if(!isdsturiset()) {
        handle_ruri_alias();
    }
#!endif
    return;
}

# Routing to foreign domains
route[SIPOUT] {
    if (uri==myself) return;
    xlog("SIPOUT $du\r\n\r\n");
    append_hf("P-hint: outbound\r\n");
    route(RELAY);
    exit;
}

# PSTN GW routing
route[PSTN] {
#!ifdef WITH_PSTN
    # check if PSTN GW IP is defined
    if (strempty($sel(cfg_get.pstn.gw_ip))) {
        xlog("SCRIPT: PSTN routing enabled but pstn.gw_ip not defined\n");
        return;
    }

    # route to PSTN dialed numbers starting with '+' or '00'
    #     (international format)
    # - update the condition to match your dialing rules for PSTN routing
    if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$")) return;

    # only local users allowed to call
    if(from_uri!=myself) {
        sl_send_reply("403", "Not Allowed");
        exit;
    }

    if (strempty($sel(cfg_get.pstn.gw_port))) {
        $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip);
    } else {
        $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip) + ":"
                    + $sel(cfg_get.pstn.gw_port);
    }

    route(RELAY);
    exit;
#!endif

    return;
}

# XMLRPC routing
#!ifdef WITH_XMLRPC
route[XMLRPC] {
    # allow XMLRPC from localhost
    if ((method=="POST" || method=="GET")
            && (src_ip==127.0.0.1)) {
        # close connection only for xmlrpclib user agents (there is a bug in
        # xmlrpclib: it waits for EOF before interpreting the response).
        if ($hdr(User-Agent) =~ "xmlrpclib")
            set_reply_close();
        set_reply_no_connect();
        dispatch_rpc();
        exit;
    }
    send_reply("403", "Forbidden");
    exit;
}
#!endif

# Routing to voicemail server
route[TOVOICEMAIL] {
#!ifdef WITH_VOICEMAIL
    if(!is_method("INVITE|SUBSCRIBE")) return;

    # check if VoiceMail server IP is defined
    if (strempty($sel(cfg_get.voicemail.srv_ip))) {
        xlog("SCRIPT: VoiceMail routing enabled but IP not defined\n");
        return;
    }
    if(is_method("INVITE")) {
        if($avp(oexten)==$null) return;

        $ru = "sip:" + $avp(oexten) + "@" + $sel(cfg_get.voicemail.srv_ip)
                + ":" + $sel(cfg_get.voicemail.srv_port);
    } else {
        if($rU==$null) return;
        xlog("READY TO ROUTE to $rU");
        $ru = "sip:" + $rU + "@" + $sel(cfg_get.voicemail.srv_ip)
                + ":" + $sel(cfg_get.voicemail.srv_port);
        xlog("READY TO ROUTE to $ru");
    }

    route(RELAY);
    exit;
#!endif

    return;
}

# Manage outgoing branches
branch_route[MANAGE_BRANCH] {
    xdbg("new branch [$T_branch_idx] to $ru\n");
    route(NATMANAGE);
}

# Manage incoming replies
onreply_route[MANAGE_REPLY] {
    xdbg("incoming reply\n");
    if(status=~"[12][0-9][0-9]") {
        route(NATMANAGE);
    }
}

# Manage failure routing cases
failure_route[MANAGE_FAILURE] {
    route(NATMANAGE);

    if (t_is_canceled()) exit;

#!ifdef WITH_BLOCK3XX
    # block call redirect based on 3xx replies.
    if (t_check_status("3[0-9][0-9]")) {
        t_reply("404","Not found");
        exit;
    }
#!endif

#!ifdef WITH_VOICEMAIL
    # serial forking
    # - route to voicemail on busy or no answer (timeout)
    if (t_check_status("486|408")) {
        $du = $null;
        route(TOVOICEMAIL);
        exit;
    }
#!endif
}




On 08/02/2016 02:59 AM, Phil Lavin wrote:
This works fine. On the T41P I went to the DSSKey tab, configured Line Key4 as follows:

:: Type: BLF
:: Value: 44123456789@kamailio.domain.com
:: Label: Name of the user
:: Line 1

The value has 2 parts:

:: The phone number of the user to whom we are subscribing
:: The domain name that this user registers to. This bit is important in Kamailio. If you want BLF, all UAs need to use the same domain name

The line should be the line that is registered to the server you are subscribing too.

It should be noted that we are running a forked/patched version of Kamailio 4.3.4. The relevant git commits are:

:: 2e99fe0
:: 56f3e25
:: b2843e5
:: a9ece27
:: d97f47c
:: fb2ede3
:: feef158
:: 19fce63
:: b5f9fb1

I think all but the last 4 are in 4.4. The last 4 are on Github as pull requests into master. Daniel is going to review when he has time... but we've been running in production for around a week now with no issues.

We're also running a fairly carefully crafted config to work around a number of other bugs with pua/presence which we didn't have the time to find a proper code solution for. Config is below:

phil@ua-proxy-dev:~$ grep 'pua\|presence' /etc/kamailio/kamailio.cfg
loadmodule "presence.so"
loadmodule "presence_xml.so"
loadmodule "presence_mwi.so"
loadmodule "presence_dialoginfo.so"
loadmodule "pua.so"
loadmodule "pua_dialoginfo.so"
# ----- presence params -----
modparam("presence", "db_url", DBURL)
modparam("presence", "db_update_period", 20)
modparam("presence", "clean_period", 60)
modparam("presence", "local_log_facility", "LOG_LOCAL3")
modparam("presence", "max_expires", 14430) # PortaOne max call time (4 hours) plus a little
# ----- presence_xml params -----
modparam("presence_xml", "db_url", DBURL)
modparam("presence_xml", "force_active", 1)
# ----- pua params -----
modparam("pua", "db_url", DBURL)
modparam("pua", "db_mode", 0) # Memory only. Required due to the "multiple states for a single dialog" bug
modparam("pua", "update_period", 20)
modparam("pua", "outbound_proxy", MY_SIP_URL)
# ----- pua_dialoginfo params -----
modparam("pua_dialoginfo", "send_publish_flag", FLT_DLGINFO)
modparam("pua_dialoginfo", "override_lifetime", 14420) # PortaOne max call time (4 hours) plus a little
modparam("pua_dialoginfo", "callee_trying", 1) # Implemented by Phil - submitted upstream to v4.4

pua db_mode can probably be changed to 2 following the recent fixes that are awaiting pull request review. We haven't tested this yet, though.


Cheers

Phil Lavin
Telecoms Systems Manager
CloudCall
www.cloudcall.com

T: +44 (0) 330 335 0000 / +1 617 982 1600
D: +44 (0) 116 424 4790 / +1 716 242 6604
SM: LinkedIn 
READ OUR BLOG FOR SMARTER COMMUNICATIONS 

Confidentiality: This e-mail transmission, including any attachments, is intended only for the named recipient(s) and may contain information that is privileged, confidential and/or exempt from disclosure under applicable law. If you have received this transmission in error, or are not the named recipient(s), please notify the sender immediately by return e-mail and permanently delete this transmission, including any attachments.
Security: This e-mail and any attachments are believed to be free from any virus but it is the responsibility of the recipient to ensure this is so. E-mail is not a 100% secure communication.

-----Original Message-----
From: Phil Lavin 
Sent: 02 August 2016 10:29
To: Kamailio (SER) - Users Mailing List <sr-users@lists.sip-router.org>
Subject: RE: [SR-Users] Kamailio presence

I've done quite a bit with Kamailio BLF recently. I have a Yealink T41P on my desk here - I'll give it a whirl.


-----Original Message-----
From: Phil Lavin 
Sent: 02 August 2016 10:26
To: Kamailio (SER) - Users Mailing List <sr-users@lists.sip-router.org>
Subject: RE: [SR-Users] Kamailio presence

I've done quite a bit with Kamailio BLF recently. I have a Yealink T41P on my desk here - I'll give it a whirl.


-----Original Message-----
From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Bill
Sent: 02 August 2016 01:07
To: sr-users@lists.sip-router.org
Subject: [SR-Users] Kamailio presence



I have asked this question before, but never really got an answer:

Has anybody been able to get BLF working with Yealink phones.


Bill



_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users