I have seen the videos but the config it does not work and i got lost with changes. 
Is there a guide with a working example so i could adapt it, please?




On Monday, July 20, 2020, Alex Balashov <abalashov@evaristesys.com> wrote:
Have you looked up Fred Posner's various presentations on Kamailio + Asterisk over the years, e.g.

https://www.youtube.com/watch?v=3OCA6DrRsRU

-- Alex

On 7/20/20 2:52 PM, John Tuxies wrote:
Trying to setup a lab where i would like tohave:
-kamailio (5.3 from deb repo) in front to load balance. Keep registrations. IP: 192.168.1.100
-Asterisk _1 (16 LTS). IP: 192.169.1.101.It <http://192.169.1.232.It> will serve as media server for IVR, VM, etc. Bind port is 5080. A sip trunk to Kamailio in sip.conf
-Asterisk-2 (16 LTS). IP: 192.168.1.102. Identical config to Asterisk-1.

Tried to follow this https://kb.asipto.com/asterisk:realtime:kamailio-3.0.x-asterisk-1.6.2-astdb, but it is quite old and it does jot apply to newer versions of Asterisk and Kamailio.
Up to jow i have the Kamailio setup and users can register on Kamailio following the basic setup. I would like advice on setup and configuration, to integrate Kamailio with Asterisk boxes
Some advice please?


Sincerely yours,
John


_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users


--
Alex Balashov | Principal | Evariste Systems LLC

Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free)
Web: http://www.evaristesys.com/, http://www.csrpswitch.com/

_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users