Hi again,

I start rtpproxy like this:
rtpproxy -2f -l 193.55.55.55/10.245.x.x
can someone give me a quick hint what problem could cause this output:

outgoing calls work & have this output:

received command "U 5e04ce62ad145445YTczODQwZGYxMDVhODNjODYwZWE0YzQxOTA3OGEwMmM.10.245.16.55 45746 6879e139"
new session 5e04ce62ad145445YTczODQwZGYxMDVhODNjODYwZWE0YzQxOTA3OGEwMmM., tag 68  9 requested, type strong
new session on a port 35000 created, tag 6879e139
pre-filling caller's address with 10.245.16.55:45746
sending reply "35000 193.77.54.68
"

incoming calls dont work & have this output:

received command "L 30e096903015a6b321b8fcbe29eafda8@217.10.67.4 10.245.16.55 44  224 as15976aa3 71195064"
lookup request failed: session 30e096903015a6b321b8fcbe29eafda8@217.10.67.4, tags as15976aa3/71195064 not found
sending reply "0 193.77.54.68
"

Thanks

Sebastian

  

-----Ursprüngliche Nachricht-----
Von: Sebastian Gabris <Sebastian.Gabris@web.de>
Gesendet: 11.08.06 13:47:11
An: serusers@lists.iptel.org
Betreff: [Serusers] Problem with incoming calls
    

Hi everybody,

Like told in the subject i got problems with incomnig calls, SIP signalling works but RTP doesnt. 
When I make a call from my UA to the VoIP-Provider all works well, sip & rtp.
I start rtpproxy in bridged mode: rtpproxy -l publicIP/privateIP.

I use this scenario:

UA(private IP) <->   (privateIP) SER (publicIP)  <-> VoIP-Provider

i try to figure out where my mistake is in this config file:

route[1]
{
        if(dst_ip == 10.245.104.68)
        {
                force_rtp_proxy("","193.77.54.68");
        }
        else
        {
                force_rtp_proxy("","10.245.104.68");
        };

        t_on_reply("1");

        if (!t_relay()) {
                sl_reply_error();
        };
}

onreply_route[1] {
    if (status =~ "(183)|2[0-9][0-9]") {
        if(dst_ip == 10.245.104.68)
        {
                force_rtp_proxy("","193.77.54.68");
        }
        else
        {
                force_rtp_proxy("","10.245.104.68");
        };

     };
}


By the way, is there a option to view rtpproxy debug info?


Thanks in advance!

Sebastian
______________________________________________________________
Verschicken Sie romantische, coole und witzige Bilder per SMS!
Jetzt bei WEB.DE FreeMail: http://f.web.de/?mc=021193

_______________________________________________
Serusers mailing list
Serusers@lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
    

_____________________________________________________________________
Der WEB.DE SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
http://smartsurfer.web.de/?mc=100071&distributionid=000000000071

_______________________________________________
Serusers mailing list
Serusers@lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers