SOLVED

Hi Phil:

Your below suggestion fixed this problem for us:

modparam("pua_dialoginfo", "override_lifetime", 14420) # Max call time (4 hours) plus a little

 

Pejman Rajabian

Director of Product Development

iTalk IP Networks LLC
Office: (703) 550-8888 x.107
Cell: (571) 723-2224
Fax: (703) 439-1350
pejman@italkip.com

 

From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Phil Lavin
Sent: Friday, May 20, 2016 10:09 AM
To: Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] Sequential calls messes up presence with pua-dialog info

 

You’re not going to have any of the patches I did – I believe they are all in 4.4. Though… now I look back at them, I’m not sure if any of them are relevant to your problem. The only one that might be relevant is https://github.com/kamailio/kamailio/pull/514 - specifically commit 1c0242f... Though I doubt it will help here.

 

Give the config I provided a try – that will probably solve your problems.

 

 

Phil Lavin

Telecoms Systems Manager

CloudCall by SYNETY
www.cloudcall.com


T: +44 (0) 330 335 0000 / +1 617 982 1600

D: +44 (0) 116 424 4790 / +1 716 242 6604

SM: LinkedIn

READ OUR BLOG FOR SMARTER COMMUNICATIONS 


Confidentiality: This e-mail transmission, including any attachments, is intended only for the named recipient(s) and may contain information that is privileged, confidential and/or exempt from disclosure under applicable law. If you have received this transmission in error, or are not the named recipient(s), please notify the sender immediately by return e-mail and permanently delete this transmission, including any attachments.
Security: This e-mail and any attachments are believed to be free from any virus but it is the responsibility of the recipient to ensure this is so. E-mail is not a 100% secure communication
.

 

From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Pejman Rajabian
Sent: 20 May 2016 13:07
To: Kamailio (SER) - Users Mailing List <sr-users@lists.sip-router.org>
Subject: Re: [SR-Users] Sequential calls messes up presence with pua-dialog info

 


Thanks for your response phil

Kamailio version 4.1.8
Sent from my iPhone


On May 20, 2016, at 3:17 AM, Phil Lavin <phil.lavin@synety.com> wrote:

Which version of Kamailio?

 

We had a tonne of issues with this module – many of which I submitted fixes for.

 

There were 2 issues that could not be resolved after a fair bit of trying:

 

·         The presentity table was not cleared of the old state when a new state occurred (e.g. both trying and completed would be in the table for a single dialog). The fix for this was to set pua db_mode to 0

·         The presentity table was sometimes cleared up too quickly when the dialog was still ongoing. The fix for this was to set the expiry time to a big number. In our case, the billing system won’t let calls go on for more than 4 hours so that value was chosen.

 

Here’s all the relevant settings:

 

# ----- presence params -----

modparam("presence", "db_url", DBURL)

modparam("presence", "db_update_period", 20)

modparam("presence", "clean_period", 60)

modparam("presence", "local_log_facility", "LOG_LOCAL3")

modparam("presence", "max_expires", 14430) # Max call time (4 hours) plus a little

 

# ----- presence_xml params -----

modparam("presence_xml", "db_url", DBURL)

modparam("presence_xml", "force_active", 1)

 

# ----- pua params -----

modparam("pua", "db_url", DBURL)

modparam("pua", "db_mode", 0) # Memory only. Required due to the "multiple states for a single dialog" bug

modparam("pua", "update_period", 20)

modparam("pua", "outbound_proxy", MY_SIP_URL)

 

# ----- pua_dialoginfo params -----

modparam("pua_dialoginfo", "send_publish_flag", FLT_DLGINFO)

modparam("pua_dialoginfo", "override_lifetime", 14420) # Max call time (4 hours) plus a little

modparam("pua_dialoginfo", "callee_trying", 1)

 

 

Phil Lavin

Telecoms Systems Manager

CloudCall by SYNETY
www.cloudcall.com

 

From: sr-users [mailto:sr-users-bounces@lists.sip-router.org] On Behalf Of Ali Pey
Sent: 19 May 2016 21:25
To: Kamailio (SER) - Users Mailing List <sr-users@lists.sip-router.org>
Subject: [SR-Users] Sequential calls messes up presence with pua-dialog info

 

Hello,

 

We are using pua-dialoginfo and presence modules for BLF.

 

When the first call comes in or goes out, every thing works great; however, a second call to the same key/extension (e.g a call waiting which is not answered) would turn off the key even though the original call/dialog is still active.

 

Has anyone had experienced such problem? How can I fix this?

 

Any constructive suggestion would be appreciated.

 

 

Regards,

Ali Pey

 

Image removed by sender. https://contactmonkey.com/api/v1/tracker?cm_session=d374fc77-077d-434f-8967-a30836821c8d&cm_type=open&cm_user_email=alipey@gmail.comImage removed by sender. https://contactmonkey.com/api/v1/tracker?cm_session=d374fc77-077d-434f-8967-a30836821c8d&cm_type=open&cm_user_email=alipey@gmail.com

_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users