Sorry Supreeth for the late reply.
I finally got around to make the necessary changes as per your suggestion and test.
The issue is resolved.
Thanks a lot for your prompt help.
Best regards,
Shantanu


On Thu, May 30, 2024 at 11:23 AM Shantanu K Roy <shantanukroy@gmail.com> wrote:
Thanks Supreeth.
I will let you know once I set this up on my setup and run the tests.
Best regards,
Shantanu

On Tue, May 28, 2024 at 1:30 PM Supreeth Herle <herlesupreeth@gmail.com> wrote:
Hi Shantanu,

It looks like Authentication is failing. I dont think sipp supports Digest-AKAv1-MD5. Have you ensured that correct (Digest-MD5) Algorithm is selected in FHoSS?

Then, restart S-CSCF just in case there is cached registration data and give it a try.

Best Regards,
Supreeth



On Sun, 26 May 2024 at 20:58, Shantanu K Roy <shantanukroy@gmail.com> wrote:
Hi Supreeth,
I made necessary changes in the sipp side to put the domain name instead of the IP of the xcscf. Now the SIP registration progresses to the point where the xcscf is challenging sipp with 401 Unauthorized and sipp is responding back with the authentication credentials (e.g for the 1st UE -> [authentication username=001010123456791 aka_OP=0x11111111111111111111111111111111 aka_K=0x8baf473f2f8fd09487cccbd7097c6862 aka_AMF=0x8000];) I took the OP, K and AMF values as programmed in the FHoSS.
I am enclosing the pcap and syslog snips for the transaction.
Please let me know if any more information is required.
Regards,
Shantanu


On Fri, May 24, 2024 at 11:18 AM Supreeth Herle <herlesupreeth@gmail.com> wrote:
Hi Shantanu,

While using sipp to test IMS, I would suggest setting the IP of P-CSCF as ims.mnc001.mcc001.3gppnetwork.org rather than harcoding the IP address of the P-CSCF (192.168.50.169).

Btw, I dont see the Rx signalling in the pcap attached.

BR,
Supreeth

On Thu, 23 May 2024 at 21:46, Shantanu K Roy via sr-users <sr-users@lists.kamailio.org> wrote:
Hello,
We are trying to integrate Kamailio as the IMS server with our 5G core emulator by following the steps listed out at https://open5gs.org/open5gs/docs/tutorial/02-VoLTE-setup/. In our case, we have our own 5G core emulator instead of the Open5GS core.
We are using sipp scripts to generate the SIP calls. The PCRF component of the 5G core is emulated by us and is capable of handling Diamater calls from Kamailio over the Rx interface.
We have got the setup working to the point where the SIP Register calls are landing on the PCSCF which in turn is sending out AA Requests to PCRF and the PCRF is responding. However there is an internal error in the Kamailio log
"4(3682133) ERROR: ims_qos [ims_qos_mod.c:1305]: w_rx_aar_register(): This contact does not exist in PCSCF usrloc - error in cfg file"
Please help us in identifying if we are missing anything in the Kamailio set up.
The packet capture and syslog excerpts from the VM where Kamailio is running are attached; here we are trying to perform SIP Registration for three SIP endpoints 001010123456791, 001010123456792 and 001010123456793.
If there is any additional information required, please let us know.
Regards,
Shantanu Kumar Roy

__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
To unsubscribe send an email to sr-users-leave@lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe: