Dear ALL

i find the cause of my problem,

when UA1 registers in the SER , the radius shows the log (this time my account is "ua1" and password is "test" )

when UA1 calls UA2, the radius shows the log

then i can't call anyone

if i change the password from 'test' to '.' , i can call anywhere , but UA1 must change its password when regsiter.

i don't know why the password be changed to '.' when b2bua transfer the packet to radius

does anyone help me ?

Best Regards

ar.

----- Original Message -----

From: arr

To: serusers@lists.iptel.org

Sent: Monday, April 03, 2006 8:27 PM

Subject: Re: [Serusers] about the accounting and prepaid problem

Dear ALL:

I still have this problem !!

SIP UA can register in the SER after freeradius checking,

but when call forwarded to the b2bua ( b2bua then auth by radius) , follow is the radius log

modcall[authorize]: module "sql" returns notfound for request 4 <====but i use the same account and password to register to the SER
modcall: leaving group authorize (returns ok) for request 4
auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user
auth: Failed to validate the user.

Please help me

follow is in my ser.cfg

if (method=="INVITE") {
           record_route();
           forward(b2bua.server,5065);
           sl_send_reply("181","Forwarding the call to B2BUA");

        }

ar.

----- Original Message -----

From: Chia-Hung Hsu

To: serusers@lists.iptel.org

Sent: Sunday, March 26, 2006 12:30 AM

Subject: Fw: [Serusers] about the accounting and prepaid problem

Dear All,

    I am new in SER and B2BUA, and I have a problem now



UA1----SER----B2BUA----Freeradius

                |

                |

             UA2

if i use the configure in b2bua-cfg.xml

<Billing_Server>
       <Address>radius.xxx.com</Address>
       <Authentication_Port>1813</Authentication_Port>
       <Accounting_Port>1813</Accounting_Port>
       <Password>password</Password>

</Billing_Server>

it will show the log in the radius server, when UA1 called to UA2

rad_recv: Access-Request packet from host 140.110.20.55:1024, id=0, length=68
Authentication-Request sent to a non-authentication port from client b2bua:1024 - ID 0 : IGNORED

so , i change the configure in b2bua-cfg.xml

<Billing_Server>
       <Address>radius.xxx.com</Address>
       <Authentication_Port>1812</Authentication_Port>
       <Accounting_Port>1813</Accounting_Port>
       <Password>password</Password>

</Billing_Server>

when UA1 called to UA2 , caller show the log "Number does not exist Call rejected : 404 not found"

Can anyone help me?

John Hsu

_______________________________________________
Serusers mailing list
serusers@lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers