On Thu, Feb 19, 2009 at 4:58 PM, Ovidiu Sas <osas@voipembedded.com> wrote:
Print the R-URI before invoking load_gws().  Make sure that it is not
altered and it matches your roule.

Regards,
Ovidiu Sas
I printed the R-URI, its not changing in the route before i am invoking load_gws()

kamailio log:  [ROUTE-3] Sending r-uri to Route-4 : 0XXXXXX
kamailio log:  [ROUTE-4] unable to find gateway for r-uri: 0XXXXXX 
 

Thanks,

Asim


On Thu, Feb 19, 2009 at 11:54 AM, Asim Riaz <ariaz78@gmail.com> wrote:
>
> it i
> On Thu, Feb 19, 2009 at 4:49 PM, Ovidiu Sas <osas@voipembedded.com> wrote:
>>
>> Check your fifo lcr_dump output to see what you have loaded in the tables.
>
>
> thats what i got from output, which seems ok .
> GW::  GRP_ID=1 URI=sip:X.X.X.X:5060;transport=udp STRIP=0 TAG= FLAGS=0
> RULE::  PREFIX=0 FROM_URI=NULL GRP_ID=1 PRIORITY=1
>
> Thanks
> Asim
>
>>
>>
>> Regards,
>> Ovidiu Sas
>>
>> On Thu, Feb 19, 2009 at 11:44 AM, Asim Riaz <ariaz78@gmail.com> wrote:
>> >
>> >
>> > On Thu, Feb 19, 2009 at 4:39 PM, Gustavo Mistrinelli
>> > <gmistrinelli@gmail.com> wrote:
>> >>
>> >> Hey Asim, may be I'm asking you a stupid questiion, did you do kamctl
>> >> lcr
>> >> reload?
>> >>
>> >> Best,
>> >>
>> >> Gustavo
>> >
>> > Yes I did reload and i reload the kamailio server but still the same,
>> > the
>> > strange thing is this route was working before but when i added new
>> > routes,
>> > didnt work so i removed this route and added again and after that this
>> > route
>> > with 0 prefix stopped working.
>> >
>> > Thanks,
>> >
>> > Asim
>> >>
>> >> On Thu, Feb 19, 2009 at 2:36 PM, Asim Riaz <ariaz78@gmail.com> wrote:
>> >>>
>> >>>
>> >>> On Thu, Feb 19, 2009 at 4:27 PM, Ovidiu Sas <osas@voipembedded.com>
>> >>> wrote:
>> >>>>
>> >>>> Make sure that from_uri is NULL and not a white space.
>> >>>> Please copy the mailing list in your reply.
>> >>>
>> >>>  I tried from_uri with Null, still the same, not finding the gateway;
>> >>> dub-deg-sbc4:~/sip-tests/test# kamctl lcr show
>> >>> lcr routes
>> >>> +----+--------+----------+--------+----------+
>> >>> | id | prefix | from_uri | grp_id | priority |
>> >>> +----+--------+----------+--------+----------+
>> >>> | 10 | 0      | NULL     |      1 |        1 |
>> >>> +----+--------+----------+--------+----------+
>> >>>
>> >>> Thanks,
>> >>>
>> >>> Asim
>> >>>>
>> >>>>
>> >>>> Regards,
>> >>>> Ovidiu Sas
>> >>>>
>> >>>> On Thu, Feb 19, 2009 at 11:25 AM, Asim Riaz <ariaz78@gmail.com>
>> >>>> wrote:
>> >>>> >
>> >>>> >
>> >>>> > On Thu, Feb 19, 2009 at 4:16 PM, Ovidiu Sas <osas@voipembedded.com>
>> >>>> > wrote:
>> >>>> >>
>> >>>> >> Is your R-URI starting with a '0'?
>> >>>> >> You have defined a single route for all '0' prefix destinations.
>> >>>> >
>> >>>> > yes R-URI is starting with 0.
>> >>>> >>
>> >>>> >>
>> >>>> >> Regards,
>> >>>> >> Ovidiu Sas
>> >>>> >>
>> >>>> >> On Thu, Feb 19, 2009 at 11:06 AM, Asim Riaz <ariaz78@gmail.com>
>> >>>> >> wrote:
>> >>>> >> >
>> >>>> >> >
>> >>>> >> > On Thu, Feb 19, 2009 at 3:53 PM, Daniel-Constantin Mierla
>> >>>> >> > <miconda@gmail.com> wrote:
>> >>>> >> >>
>> >>>> >> >> Hello,
>> >>>> >> >>
>> >>>> >> >> On 02/19/2009 05:34 PM, Asim Riaz wrote:
>> >>>> >> >>>
>> >>>> >> >>> Hello,
>> >>>> >> >>> I am using LCR, for some reason load_gws() function is not
>> >>>> >> >>> finding the
>> >>>> >> >>> gateway in DB, it was working in the start then added some
>> >>>> >> >>> more
>> >>>> >> >>> routes
>> >>>> >> >>> and
>> >>>> >> >>> after that everything stopped working, I am not sure where to
>> >>>> >> >>> start
>> >>>> >> >>> troubleshooting,  any idea ?
>> >>>> >> >>
>> >>>> >> >> run kamailio with higher debug mode (e.g., debug=5) in
>> >>>> >> >> configuration
>> >>>> >> >> file.
>> >>>> >> >>
>> >>>> >> >> You should get more debug messages in the syslog, that may give
>> >>>> >> >> you
>> >>>> >> >> some
>> >>>> >> >> hints. look for lines containing 'lcr'.
>> >>>> >> >>
>> >>>> >> >> Cheers,
>> >>>> >> >> Daniel
>> >>>> >> >
>> >>>> >> > Hi Daniel,
>> >>>> >> > I tried  higher debug level, not getting anything related to LCR
>> >>>> >> > all i
>> >>>> >> > am
>> >>>> >> > getting XLOG messages "unable to find Gateway".
>> >>>> >> >
>> >>>> >> > Thanks,
>> >>>> >> >
>> >>>> >> > Asim
>> >>>> >> >
>> >>>> >> >>
>> >>>> >> >>>
>> >>>> >> >>> kamctl lcr show
>> >>>> >> >>>
>> >>>> >> >>> lcr routes
>> >>>> >> >>> +----+--------+----------+--------+----------+
>> >>>> >> >>> | id | prefix | from_uri | grp_id | priority |
>> >>>> >> >>> +----+--------+----------+--------+----------+
>> >>>> >> >>> |  9 | 0      |          |      1 |        1 |
>> >>>> >> >>> +----+--------+----------+--------+----------+
>> >>>> >> >>> lcr gateways
>> >>>> >> >>>
>> >>>> >> >>>
>> >>>> >> >>>
>> >>>> >> >>>
>> >>>> >> >>> +------------+---------------+------+------------+-----------+--------+-------+------+-------+
>> >>>> >> >>> | gw_name    | ip_addr       | port | uri_scheme | transport |
>> >>>> >> >>> grp_id
>> >>>> >> >>> |
>> >>>> >> >>> strip | tag  | flags |
>> >>>> >> >>>
>> >>>> >> >>>
>> >>>> >> >>>
>> >>>> >> >>>
>> >>>> >> >>> +------------+---------------+------+------------+-----------+--------+-------+------+-------+
>> >>>> >> >>> | XXXX           | XXXX | 5060 |          1 |         1 |
>> >>>> >> >>>  1
>> >>>> >> >>> |
>> >>>> >> >>> 0
>> >>>> >> >>> |      |     0 |
>> >>>> >> >>>
>> >>>> >> >>>
>> >>>> >> >>>
>> >>>> >> >>>
>> >>>> >> >>> +------------+---------------+------+------------+-----------+--------+-------+------+-------+
>> >>>> >> >>>
>> >>>> >> >>>
>> >>>> >> >>>
>> >>>> >> >>> my routing script
>> >>>> >> >>>
>> >>>> >> >>>          if(!load_gws()) {
>> >>>> >> >>>         xlog("L_INFO", "[ROUTE-X] Unable To Find Gateway ");
>> >>>> >> >>>                sl_send_reply("503", "unable to find gateway");
>> >>>> >> >>>                exit;
>> >>>> >> >>>        }
>> >>>> >> >>> Thanks in advance.
>> >>>> >> >>>
>> >>>> >> >>> Asim
>> >>>> >> >>>
>> >>>> >> >>>
>> >>>> >> >>>
>> >>>> >> >>> ------------------------------------------------------------------------
>> >>>> >> >>>
>> >>>> >> >>> _______________________________________________
>> >>>> >> >>> Kamailio (OpenSER) - Users mailing list
>> >>>> >> >>> Users@lists.kamailio.org
>> >>>> >> >>> http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
>> >>>> >> >>>
>> >>>> >> >>> http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
>> >>>> >> >>
>> >>>> >> >> --
>> >>>> >> >> Daniel-Constantin Mierla
>> >>>> >> >> http://www.asipto.com
>> >>>> >> >>
>> >>>> >> >
>> >>>> >> >
>> >>>> >> > _______________________________________________
>> >>>> >> > Kamailio (OpenSER) - Users mailing list
>> >>>> >> > Users@lists.kamailio.org
>> >>>> >> > http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
>> >>>> >> > http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
>> >>>> >> >
>> >>>> >
>> >>>> >
>> >>>
>> >>>
>> >>> _______________________________________________
>> >>> Kamailio (OpenSER) - Users mailing list
>> >>> Users@lists.kamailio.org
>> >>> http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
>> >>> http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
>> >>
>> >>
>> >>
>> >> --
>> >> Gustavo Mistrinelli
>> >
>> >
>
>