Hello,
Mediaproxy is working fine when there is only one
session.
When a second session jumps in, the audio gets very
bad (you can no understand at all).
When some of the session ends, the audio gets back
OK for the remaining session.
Please adivse how i can solve this
problem.
I am using the standar ser.cfg that comes for
nathelper modified to use mediaproxy.
Thanks in advance,
Ri Liang
----- Original Message -----
Sent: Thursday, June 03, 2004 1:52
AM
Subject: Re: [Serusers] ser stable +
mediaproxy
You should apply the functions from the module to INVITE and
REGISTER only. Messages having no contact header will give the warning which
is harmless but your config needs some tuning.
Adrian
On Jun 3,
2004, at 9:23 AM, Ri Liang wrote:
Thanks a lot,
I'm
now using lates ser stable
CVS+mediaproxy.
But in the register
process i got this error (the user get successfully register), please advise
if this is a normal messsage.
....
/ser[8813]:
error: mediaproxy/getContactURI(): error parsing Contact body
....
Ri
Liang
------------------------------------------------------------------------------------------------------
/ser[8813]:
method: <REGISTER>
/ser[8813]:
uri: <sip:192.168.2.3>
/ser[8813]:
version: <SIP/2.0>
/ser[8813]:
parse_headers: flags=1
/ser[8813]:
Found param type 232, <branch> = <z9hG4bK3e28f0599ccb9b4a>;
state=16
/ser[8813]:
end of header reached, state=5
/ser[8813]:
parse_headers: Via found, flags=1
/ser[8813]:
parse_headers: this is the first via
/ser[8813]:
After parse_msg...
/ser[8813]:
preparing to run routing scripts...
/ser[8813]:
DEBUG : is_maxfwd_present: searching for max_forwards header
/ser[8813]:
parse_headers: flags=128
/ser[8813]:
end of header reached, state=9
/ser[8813]:
DEBUG: get_hdr_field: <To> [35]; uri=[sip:2222@192.168.2.3;user=phone]
/ser[8813]:
DEBUG: to body [<sip:2222@192.168.2.3;user=phone>^M ]
/ser[8813]:
get_hdr_field: cseq <CSeq>: <100> <REGISTER>
/ser[8813]:
DEBUG: is_maxfwd_present: value = 70
/ser[8813]:
parse_headers: flags=64
/ser[8813]:
error: mediaproxy/getContactURI(): error parsing Contact body
/ser[8813]:
check_via_address(192.168.2.22, 192.168.2.22,
0)
/ser[8813]:
parse_headers: flags=256
/ser[8813]:
DEBUG: get_hdr_body : content_length=0
/ser[8813]:
found end of header
/ser[8813]:
find_first_route(): No Route headers found
/ser[8813]:
loose_route(): There is no Route HF
/ser[8813]:
check_self - checking if host==us: 11==9 && [192.168.2.3] ==
[127.0.0.1]
/ser[8813]:
check_self - checking if port 5060 matches port 5060
/ser[8813]:
check_self - checking if host==us: 11==11 && [192.168.2.3] ==
[192.168.2.3]
/ser[8813]:
check_self - checking if port 5060 matches port 5060
/ser[8813]:
check_self - checking if host==us: 11==9 && [192.168.2.3] ==
[127.0.0.1]
/ser[8813]:
check_self - checking if port 5060 matches port 5060
/ser[8813]:
check_self - checking if host==us: 11==11 && [192.168.2.3] ==
[192.168.2.3]
/ser[8813]:
check_self - checking if port 5060 matches port 5060
/ser[8813]:
parse_headers: flags=4096
/ser[8813]:
pre_auth(): Credentials with given realm not
found
/ser[8813]:
build_auth_hf(): 'WWW-Authenticate: Digest realm="sip.callmyway.net",
nonce="40bec3e4d09adf671de759a294bcdca543de6efc"^M '
/ser[8813]:
parse_headers: flags=-1
/ser[8813]:
check_via_address(192.168.2.22, 192.168.2.22,
0)
/ser[8813]:
receive_msg: cleaning up
/ser[8811]:
SIP Request:
------------------------------------------------------------------------------------------------------
-----
Original Message -----
From:
Tjapko ITS
Consult@ncy
To:
Adrian
Georgescu ; rliang@callmyway.com
Cc:
serusers@lists.iptel.org
Sent:
Tuesday, June 01, 2004 5:24 AM
Subject:
RE: [Serusers] ser stable + mediaproxy
Hello,
I had same problem. Use stable 0.8.12 SER from latest CVS and
mediaproxy from latest CVS head. Recompile this and it should work. Do not
use rpm or tarball to create your SER. Hope this helps. I
have discovered more things that are causing problems implementing SER
with Mediaproxy. Tjapko.
-----Original
Message-----
From:
serusers-bounces@lists.iptel.org
[mailto:serusers-bounces@lists.iptel.org]On Behalf Of Adrian Georgescu
Sent:
Martes, 01 de Junio de 2004 03:38 a.m.
To:
rliang@callmyway.com
Cc:
serusers@lists.iptel.org
Subject:
[Serusers] ser stable + mediaproxy
Hi
Ri,
We use successfully mediaproxy with both stable and unstable
branches of ser on Debian systems. There is no known reason it should crash,
maybe IPTEL guys would have more clues as I saw this problem being reported
several time.
Adrian
--
Hello,
I'm using lates
ser CVS stable with mediaproxy (from unstable ser directory
and also
using the mysql create with unstable ser_mysql.sh).
SER crash in the
same moment when a sip cliente get register with the
correct user and
password, i have attach the syslog.
Am I using the right combination
of SER+mediaproxy ? or do i need to use
only the unstable ser (with it's
mediaproxy include).