Hi all,

I just want to report back.

Daniels suggestion worked great!

Thanks a lot for your input.

On the "incorrect" BYE request, trigger a cancel for the INVITE with t_cancel_callid() using call-id and cseq of the INVITE request. (Cseq was not the same on INVITE and BYE).
Then reply with 200 OK to the BYE message.

Cheers,

Lars

From: Daniel-Constantin Mierla <miconda@gmail.com>
Sent: Friday, October 25, 2019 1:32 PM
To: Lars Olsson <lars.olsson@optimobile.se>; Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] Rewrite BYE to Cancel

Run with debug=3 and see if you get other log messages from t_cancel_callid() execution.

Cheers,
Daniel

On 25.10.19 13:09, Lars Olsson wrote:

Sorry for forgetting to that result:

ERROR: <script>: Failed to cancel transaction

From: Daniel-Constantin Mierla <miconda@gmail.com>
Sent: Friday, October 25, 2019 1:08 PM
To: Lars Olsson <lars.olsson@optimobile.se>; Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] Rewrite BYE to Cancel
Hello,

which of the xlog messages were printed?

Cheers,
Daniel

On 25.10.19 13:04, Lars Olsson wrote:
Hi Daniel,

Thanks for your reply.

Used the following script for testing:

if (is_method("BYE")) {

xlog("CALLID: $ci\n");

xlog("CSEQ: $cs\n");

if (t_cancel_callid("$ci", "$cs", "0")) {

xlog("Transaction cancelled\n");

} else {

xlog("Failed to cancel transaction\n");

}

send_reply("200", "OK");

exit;

}

No cancel message was triggered.

Best Regards,

Lars

From: Daniel-Constantin Mierla <miconda@gmail.com>
Sent: Friday, October 25, 2019 12:32 PM
To: Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>; Lars Olsson <lars.olsson@optimobile.se>
Subject: Re: [SR-Users] Rewrite BYE to Cancel
Hello,

actually sending BYE for an in-progress call setup (initial INVITE routed, but 200ok was not received yet) is valid from SIP RFC point of view. So it is not really a broken implementation (or, not to put all my money in, it can be, but not because of this kind of BYE).

Practically the BYE can be used to terminate a specific branch in a call setup. Think about parallel forking, and many branches start sending back 183. The caller UA can send BYE to some of the branches and let the others wait to complete.

The CANCEL has to be used when all the branches should be terminated. If there is a single branch, then the BYE terminates the call in progress, I am not sure what the callee UA should reply to the INVITE.

On the other hand, in the very few cases when I saw UAs sending BYE for early call setup, the other side was rejecting it, expecting the cancel.

I expect it should work with kamailio to send 200ok for such BYE and then use t_cancel_callid():

https://www.kamailio.org/docs/modules/stable/modules/tmx.html#tmx.f.t_cancel_callid

The call-id and cseq values should be the same in the BYE request.

Try it and write back if works, I am quite curious about...

Cheers,
Daniel

On 25.10.19 12:17, Lars Olsson wrote:
Yes it is a BROKEN behavior from the remote system, unfortunately it can not be changed.

Besides this issue, the remote system works as it should.

A custom b2bua can for sure resolve this, but perhaps not in a standard way.

Question is if it is possible to resolve with Kamailio or if I need to patch SEMS to handle this.

Something like this:

if ("BYE" && dialog not confirmed)

reply back 200 OK

cancel other side of dialog

As Kamailio can terminate active dialog with sending bye in both directions, I thought that it might be possible to resolve this as well. Hence asking for ideas.

Best Regards,

Lars

From: sr-users <sr-users-bounces@lists.kamailio.org> on behalf of Steve Davies <steve-lists-srusers@connection-telecom.com>
Sent: Friday, October 25, 2019 11:25 AM
To: Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] Rewrite BYE to Cancel

Hi,

I'm normally a bystander. But on this occasion I've got to comment - there are broken SIP implementations, and there are BROKEN ones. Surely there is no hope with this one? If they can't get this right just imagine how many more problems it will have.

Steve

On Fri, 25 Oct 2019 at 11:19, Lars Olsson <lars.olsson@optimobile.se> wrote:

hi,

I have a Kamailio setup infront of a SIP system that do not handle cancellation of a INVITE correctly.

The system sends out a BYE request instead of a Cancel request on non connected dialogs.

I am trying to find a way to let Kamailio "translate" the BYE request to a Cancel reqeust for the ongoing INVITE dialog.

Alternative if SEMS b2bua can do it, but currently it replies: "not sip-relaying BYE in not connected dlg", and I have not found any obvious way to rewrite it there.

Any thoughts. I can not change the behavior of the remote system.

Best Regards,

Lars

_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- 
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio Advanced Training, Oct 21-23, 2019, Berlin, Germany -- https://asipto.com/u/kat
-- 
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio Advanced Training, Oct 21-23, 2019, Berlin, Germany -- https://asipto.com/u/kat

-- 
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio Advanced Training, Oct 21-23, 2019, Berlin, Germany -- https://asipto.com/u/kat