Hello,

Thanks for your answer.
For a holidays issue, I will not be able to try this solution until January; but as soon as I can test it, I will answer with the result.

Again, thanks.

Regards,
Rebeca Martinez

-----Mensaje original-----
De: Sabatella, Michael [mailto:Michael.Sabatella@ipc.com]
Enviado el: mié 23/12/2009 14:46
Para: Martínez García, Rebeca; serusers@lists.iptel.org
CC: Huertas García, Victor
Asunto: RE: problems when starting ser

This may help you:

You need to create the fifo something like this I believe in the /tmp directory.

mkfifo ser_fifo; chmod 777 rfifo



From: serusers-bounces@lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of "Martínez García, Rebeca"
Sent: Wednesday, December 23, 2009 7:06 AM
To: serusers@lists.iptel.org
Cc: "Huertas García, Victor"
Subject: [Serusers] problems when starting ser



Hello all,

I have installed ser in Ubuntu Karmic by means of Synaptic without any problems or errors during the installation.
But before starting to configure the ser.cfg, I decided firstly to try the configuration by default and I got this error (I only uncommented the "log_stderror=yes"):

cng@cng:/etc/ser$ ser D E
Listening on
             udp: 127.0.0.1 [127.0.0.1]:5060
             udp: 10.1.3.207 [10.1.3.207]:5060
             udp: 192.168.50.10 [192.168.50.10]:5060
             tcp: 127.0.0.1 [127.0.0.1]:5060
             tcp: 10.1.3.207 [10.1.3.207]:5060
             tcp: 192.168.50.10 [192.168.50.10]:5060
Aliases:
             tcp: cng.local:5060
             tcp: cng:5060
             tcp: localhost:5060
             udp: cng.local:5060
             udp: cng:5060
             udp: localhost:5060

 0(2956) init_tcp: using epoll_lt as the io watch method (auto detected)
cng@cng:/etc/ser$  0(2958) Maxfwd module- initializing
 0(2958) ERROR: fifo_server.c:857: Can't create FIFO: No such file or directory (mode=384)
 0(2958) ERROR: ctl: mod_init: init ctrl. sockets failed
 0(2958) init_mod(): Error while initializing module ctl
ERROR: error while initializing modules

It seems that it starts ok but suddenly finds an error and stops.
However if I run:

cng@cng:/etc/ser$ sudo /etc/init.d/ser start
Starting ser: serListening on
             udp: 127.0.0.1 [127.0.0.1]:5060
             udp: 10.1.3.207 [10.1.3.207]:5060
             udp: 192.168.50.10 [192.168.50.10]:5060
             tcp: 127.0.0.1 [127.0.0.1]:5060
             tcp: 10.1.3.207 [10.1.3.207]:5060
             tcp: 192.168.50.10 [192.168.50.10]:5060
Aliases:
             tcp: cng.local:5060
             tcp: cng:5060
             tcp: localhost:5060
             udp: cng.local:5060
             udp: cng:5060
             udp: localhost:5060

 0(3016) init_tcp: using epoll_lt as the io watch method (auto detected)
.
 0(3018) unable to create pid file /var/run/ser/ser.pid: No such file or directory

It only complains about the ser.pid file.

I am a little bit confused. Where is the problem?

Thanks in advance,
Rebeca Martinez

________________________________
DISCLAIMER: This e-mail may contain information that is confidential, privileged or otherwise protected from disclosure. If you are not an intended recipient of this e-mail, do not duplicate or redistribute it by any means. Please delete it and any attachments and notify the sender that you have received it in error. Unintended recipients are prohibited from taking action on the basis of information in this e-mail.E-mail messages may contain computer viruses or other defects, may not be accurately replicated on other systems, or may be intercepted, deleted or interfered with without the knowledge of the sender or the intended recipient. If you are not comfortable with the risks associated with e-mail messages, you may decide not to use e-mail to communicate with IPC. IPC reserves the right, to the extent and under circumstances permitted by applicable law, to retain, monitor and intercept e-mail messages to and from its systems.