Hi All,

Do i get eyeBeam freeware from any website. I do not have enough $s in my account to pay for eyebeam to test my presence server :-)
Thanks and Regards,
 
Akkala Naidu Paidi
 
A R I C E N T
 
 5th Floor, Sigma Block,
Sigma Soft Tech Park,
Bangalore - 69
Mobile:  +91 9886645448
Office:  +91 08041069295
 
 

 


"Toni Barata" <toni-r-barata@ptinovacao.pt>
Sent by: users-bounces@openser.org

06/21/2007 03:40 PM

To
"KUMAR" <kumar.kisalaya@gmail.com>, "Dave Waiting" <david@crg.ee.uct.ac.za>
cc
users@openser.org
Subject
RE: [OpenSER-Users] Re: [Users] presence





Hi Kumar,

I recommend you the Eyebeam.
Maybe you don't have the softphone well configured for presence,
On the Presence Tab you have to choose "Presence Agent" for "Mode".
On the Storage Tab you have to choose "XCAP" for "Storage Method" and
enter your xcap server (e.g. http://<ip-address>:8080/xcap-root/) for
"Root URL"

Regards,
Toni

-----Original Message-----
From: users-bounces@openser.org [mailto:users-bounces@openser.org] On
Behalf Of KUMAR
Sent: quinta-feira, 21 de Junho de 2007 10:04
To: Dave Waiting
Cc: users@openser.org
Subject: [OpenSER-Users] Re: [Users] presence

Can anyone recommend any good softphone for windows with which i can
test presence.
kumar

On 6/21/07, KUMAR <kumar.kisalaya@gmail.com> wrote:
> Thank you Dave,
> That cleared a lot of things.
> kumar
>
> On 6/21/07, Dave Waiting <david@crg.ee.uct.ac.za> wrote:
> > Hi Kumar
> >
> > Unfortunately I don't have Eyebeam, so I'm not sure if it even
supports
> > XCAP, although from what I've heard it does. Maybe someone else can
give
> > you some guidance as to what settings need to be changed.
> >
> > I think there is some confusion as to how XCAP works.
> >
> > XCAP uses HTTP to retrieve and send documents to an XCAP server.
This
> > may or may not be located on the same machine as your SIP Presence
> > server. As far as I know OpenSER only deals with SIP messages and
> > therefore does not support the XCAP protocol. That's why you need
XCAP-lite.
> >
> > The confusing part is that the OpenSER presence module can look at
XML
> > pres-rules documents that were obtained by the XCAP server and make
> > presence decisions based on these documents. But OpenSER does not
deal
> > with the XCAP protocol itself, only the resulting XML documents.
> >
> > XCAP-lite uses Apache to listen for incoming HTTP GET and PUT
requests.
> > Your client (eyebeam) must send the XML pres-rules documents using
HTTP
> > to the XCAP server (probably listening on port 80) and not to the
SIP
> > presence server (probably listening on port 5060).
> >
> > So the openser.cfg file should not be consulted for XCAP requests,
only
> > for SIP PUBLISH and SUBSCRIBE presence requests. It looks to me like
> > eyebeam is trying to set the pres-rules using SIP not XCAP and that
is
> > why it's not recognizing the event type. (Your openser.cfg file
looks
> > fine by the way.)
> >
> > Regards
> >
> > Dave
> >
> >
> >
> > KUMAR wrote:
> > > Hi Dave,
> > > Where do I need to change the settings, in Eyebeam or in
Openser.cfg.
> > > I couldnt find any setting in the Eyebeam to make such change. As
for
> > > my configuration file, i am attaching it alongwith.
> > > Thank you
> > > kumar
> > >
> > > On 6/21/07, Dave Waiting <david@crg.ee.uct.ac.za> wrote:
> > >>
> > >> Now that I look a little closer it seems that Eyebeam is trying
to
> > >> either get or set your pres-rules using a SIP SUBSCRIBE.
> > >>
> > >> The XCAP protocol (and the XCAP-lite server) uses HTTP GET and
PUT
> > >> methods to set and retrieve the pres-rules documents. Try change
your
> > >> settings to use XCAP rather than SIP to change your pres-rules.
> > >>
> > >> Hope this helps.
> > >>
> > >>
> > >> Dave Waiting wrote:
> > >> > Hi Kumar
> > >> >
> > >> > As far as I am aware the presence module adheres to RFC3856 and
> > >> > RFC3857. Therefore the only valid event types would be:
> > >> >
> > >> > Event: presence
> > >> >
> > >> > and
> > >> >
> > >> > Event: presence.winfo
> > >> >
> > >> > It seems strange that Eyebeam does not follow this syntax.
Perhaps
> > >> > there is a setting you can change.
> > >> >
> > >> > Regards
> > >> >
> > >> > Dave
> > >> >
> > >> >
> > >> >
> > >> > KUMAR wrote:
> > >> >> Hi all,
> > >> >> I am using  openser 1.2.1-notls (i386/linux), with eyebeam
configured
> > >> >> to use XCAP, and i sitll get the same error
> > >> >>
> > >> >> PRESENCE: handle_subscribe:Missing or unsupported event header
field
> > >> >> value
> > >> >> 2(12452) PRESENCE:handle_subscribe: ERROR occured
> > >> >> 2(12452) WARNING: script writer didn't release transaction
> > >> >>
> > >> >> The packet capture shows that the Events field in the
SUBSCRIBE have
> > >> >> Event: ua-profile;profile-type=application;auid="pres-rules"
> > >> >>
> > >> >> Anyone please help me out. I really need to get this working.
> > >> >> regards
> > >> >> kumar
> > >> >>
> > >> >>
> > >> >> On 6/20/07, Klaus Darilion <klaus.mailinglists@pernau.at>
wrote:
> > >> >>>
> > >> >>>
> > >> >>> KUMAR wrote:
> > >> >>> > About XCAP server, I am using XCAP simulator from
> > >> >>> > (http://download.dns-hosting.info/XCAP/). What i want to
know is,
> > >> >>> do i
> > >> >>> > need to give the address of XCAP server in the openser.cfg,
> > >> >>>
> > >> >>> no
> > >> >>>
> > >> >>>  > or is it
> > >> >>> > automatically used by the presence module.
> > >> >>>
> > >> >>> no
> > >> >>>
> > >> >>> The XCAP server is only used by the client - e.g. eyebeam.
> > >> >>>
> > >> >>> regards
> > >> >>> klaus
> > >> >>>
> > >> >>
> > >> >> _______________________________________________
> > >> >> Users mailing list
> > >> >> Users@openser.org
> > >> >> http://openser.org/cgi-bin/mailman/listinfo/users
> > >> >>
> > >> >
> > >> >
> > >>
> > >>
> >
> >
>

_______________________________________________
Users mailing list
Users@openser.org
http://openser.org/cgi-bin/mailman/listinfo/users

_______________________________________________
Users mailing list
Users@openser.org
http://openser.org/cgi-bin/mailman/listinfo/users



***********************  Aricent-Private   ***********************

***********************  Aricent-Private   ***********************

***********************  Aricent-Private   ***********************
"DISCLAIMER: This message is proprietary to Aricent and is intended solely for the use of 
the individual to whom it is addressed. It may contain privileged or confidential information and should not be 
circulated or used for any purpose other than for what it is intended. If you have received this message in error, 
please notify the originator immediately. If you are not the intended recipient, you are notified that you are strictly
prohibited from using, copying, altering, or disclosing the contents of this message. Aricent accepts no responsibility for 
loss or damage arising from the use of the information transmitted by this email including damage from virus."