On Mon, Aug 27, 2012 at 11:19 PM, Daniel-Constantin Mierla <miconda@gmail.com> wrote:

Hello,

On 8/27/12 4:06 PM, phillman25 wrote:

Thanks Daniel i was able to implement what you advised below and am able to poll specific data into CACTI successfully.
great! Have you made it like a plugin? Maybe you can write few words about or make web page available for it, there is a similar plugin for munin, published by Inaki:

- http://dev.sipdoc.net/projects/sip-stuff/wiki/KamailioMuninPlugin

Cheers,
Daniel
Thanks again!
Phillip
On Mon, Aug 27, 2012 at 1:08 PM, Daniel-Constantin Mierla <miconda@gmail.com> wrote:
Hello,

I am not sure it supports right now sending from the same socket, but it should send back to same ip and port from where it received the command. A patch it might be required to get it like that, so far I don't remember anyone willing to get such thing.

Btw, another alternative, you can eventually use sercmd with ctl module -- it works also over tcp (as well as udp). You can run any MI command via 'mi', like:

sercmd ... mi address_dump

Look at sercmd -h for the options.

So you don't need to build a script around nc.

Cheers,
Daniel
On 8/27/12 11:21 AM, phillman25 wrote:
Thanks for the info Daniel.

I have implemented mi_datagram module and defined it with the following parameters:

modparam("mi_datagram", "socket_name", "udp:2.2.2.2:8033")

When i run the below command from a remote server:

echo -ne ":address_dump:\n\n" | nc -w 1 -u 2.2.2.2 8033

i don't receive an output, but when i monitor all traffic on the local machine:

ngrep -q -t -P "" -W byline -d any host 2.2.2.2 and udp

i observe the output:

U 2012/08/27 12:41:36.735094 1.1.1.1:55621 -> 2.2.2.2:8033

:address_dump:

U 2012/08/27 12:41:36.735201 2.2.2.2:47024 -> 1.1.1.1:55621

200 OK

71 <1, xx.xx.xx.xx, 0> [1]

72 <1, yy.yy.yy.yy, 0> [4]

Seems like the command is accepted from remote server and executed on local machine but not relayed back to the remote server. Looks like mi_datagram replies on different port other than 8033. Is there a way to force the reply on source port 8033?

Thanks

Phillip
On Mon, Aug 27, 2012 at 9:58 AM, Daniel-Constantin Mierla <miconda@gmail.com> wrote:
Hello,

if you want to execute from a remote server, maybe it is better to use mi_datagram or xmlrpc modules to run MI/RPC commands.

Cheers,
Daniel

On 8/22/12 12:02 PM, phillman25 wrote:
Dear List

I am trying to run the below command from a REMOTE server where i use Cacti to graph all my data. I am trying to graph on a per trunk basis.

kamctl fifo profile_get_size trunk | awk -F '=' '{print $4}'

This command yields an output on the local server.

Could someone perhaps point me in the right direction?

Thanks!
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla - http://www.asipto.com http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat
-- 
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat
-- 
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat