Hello
I used the set_body function
Content-Length: 192.
Content-Type: Content-Type: application/sdp.
Server: Belcenter SIP Voice Gateway.
.
v=0.
o=XX 10 10 IN IP4 192.168.1.1.
s=XX.
c=IN IP4 192.168.1.1.
t=0 0.
m=audio 0 RTP/AVP 8 101.
a=rtpmap:8 PCMA/8000.
a=rtpmap:101 telephone-event/8000.
a=fmtp:101 0-15.
a=sendrecv.
a=ptime:20
still not engaged
L
---------------------
$var(body)="v=0\r\no=XX 10 10 IN IP4 192.168.1.1\r\ns=XX\r\nc=IN IP4 192.168.1.1\r\nt=0 0\r\nm=audio 0 RTP/AVP 8 101";
$var(body2)="a=rtpmap:8 PCMA/8000\r\na=rtpmap:101 telephone-event/8000\r\na=fmtp:101 0-15\r\na=sendrecv\r\na=ptime:20";
set_body("$var(body)\r\n$var(body2)", "Content-Type: application/sdp");
msg_apply_changes();
rtpproxy_manage("corbf");
De : Daniel-Constantin Mierla [mailto:miconda@gmail.com]
Envoyé : jeudi 27 juillet 2017 13:35
À : Nicolas Breuer <Nicolas.Breuer@belcenter.biz>; Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>
Objet : Re: [SR-Users] Add SDP Body
Hello,
there is a dedicated function to set the body, do not use append_hf(), because kamailio doesn't detect there is a change of the body and content length is 0.
Cheers,
Daniel
On 27.07.17 13:25, Nicolas Breuer wrote:
Hello Daniel,
I added this
if (status=~"[1][8][0-3]"){
setflag(22);
if (is_method("INVITE")) {
xlog("L_NOTICE", " No SDP");
append_hf("Content-Type: application/sdp\r\n");
append_hf("\r\n");
append_hf("v=0\r\n");
append_hf("o=XX 10 10 IN IP4 217.112.180.9\r\n");
append_hf("s=XX \r\n");
append_hf("c=IN IP4 217.121.180.9\r\n");
append_hf("t=0 0\r\n");
append_hf("m=audio 0 RTP/AVP 8 101\r\n");
append_hf("a=rtpmap:8 PCMA/8000\r\n");
append_hf("a=rtpmap:101 telephone-event/8000\r\n");
append_hf("a=fmtp:101 0-15\r\n");
append_hf("a=sendrecv\r\n");
append_hf("a=ptime:20\r\n");
msg_apply_changes();
rtpproxy_manage("corbf");
#rtpproxy_stream2uac("/root/wait.wav", "-1");
}
Seems that proxy was not engaged. -> The port is not altered..
Trace :
Allow: INVITE,ACK,CANCEL,BYE,REGISTER,REFER,INFO,SUBSCRIBE,NOTIFY,PRACK,UPDATE,OPTIONS,MESSAGE,PUBLISH.
Content-Length: 0.
Content-Type: application/sdp.
Server: Belcenter SIP Voice Gateway.
.
v=0.
o=XX 10 10 IN IP4 217.112.180.9.
s=XX .
c=IN IP4 217.121.180.9.
t=0 0.
m=audio 0 RTP/AVP 8 101.
a=rtpmap:8 PCMA/8000.
a=rtpmap:101 telephone-event/8000.
a=fmtp:101 0-15.
a=sendrecv.
a=ptime:20.
.
De : Daniel-Constantin Mierla [mailto:miconda@gmail.com]
Envoyé : jeudi 27 juillet 2017 11:41
À : Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>; Nicolas Breuer <Nicolas.Breuer@belcenter.biz>
Objet : Re: [SR-Users] Add SDP Body
Hello,
On 27.07.17 09:57, Nicolas Breuer wrote:
Hello,
I’m trying to add a SDP Body on 183 replies.
From some carriers I don’t get any SDP.
The goal is to add SDP , Engage PROXY & stream2uac on all 183 packets without SDP
Do you think it’s possible ? J
it may be possible, if you try to combine adding content-type header and the sdp body, then use msg_apply_changes() inside reply_route{}. Later engage the rtpproxy. However, if you don't know the codecs of caller/callee, it may end in a mismatch.
Just dropping such 183 is not ok? If not, what about turning 183 in an 180? Or setting an SDP with media IP 0.0.0.0 (old on hold style)?
Cheers,
Daniel
--Daniel-Constantin Mierlawww.twitter.com/miconda -- www.linkedin.com/in/micondaKamailio Advanced Training - www.asipto.comKamailio World Conference - www.kamailioworld.com
--
Daniel-Constantin Mierla
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio Advanced Training - www.asipto.com
Kamailio World Conference - www.kamailioworld.com