And if phone has multiple contacts, there is call bug, call will be drop since there are two incoming call
#!KAMAILIO
#!define WITH_DEBUG
#!define WITH_MYSQL
#!define WITH_AUTH
#!define WITH_USRLOCDB
#!define WITH_PRESENCE
#!define WITH_ACCDB
#james
#!define WITH_UAC
#!define WITH_TSILO
#
# Kamailio (OpenSER) SIP Server v5.3 - default configuration script
# - web: https://www.kamailio.org
# - git: https://github.com/kamailio/kamailio
#
# Direct your questions about this file to: <sr-users@lists.kamailio.org>
#
# Refer to the Core CookBook at https://www.kamailio.org/wiki/
# for an explanation of possible statements, functions and parameters.
#
# Note: the comments can be:
# - lines starting with #, but not the pre-processor directives,
# which start with #!, like #!define, #!ifdef, #!endif, #!else, #!trydef,
# #!subst, #!substdef, ...
# - lines starting with //
# - blocks enclosed in between /* */
#
# Several features can be enabled using '#!define WITH_FEATURE' directives:
#
# *** To run in debug mode:
# - define WITH_DEBUG
#
# *** To enable mysql:
# - define WITH_MYSQL
#
# *** To enable authentication execute:
# - enable mysql
# - define WITH_AUTH
# - add users using 'kamctl'
#
# *** To enable IP authentication execute:
# - enable mysql
# - enable authentication
# - define WITH_IPAUTH
# - add IP addresses with group id '1' to 'address' table
#
# *** To enable persistent user location execute:
# - enable mysql
# - define WITH_USRLOCDB
#
# *** To enable presence server execute:
# - enable mysql
# - define WITH_PRESENCE
#
# *** To enable nat traversal execute:
# - define WITH_NAT
# - install RTPProxy: http://www.rtpproxy.org
# - start RTPProxy:
# rtpproxy -l _your_public_ip_ -s udp:localhost:7722
# - option for NAT SIP OPTIONS keepalives: WITH_NATSIPPING
#
# *** To enable PSTN gateway routing execute:
# - define WITH_PSTN
# - set the value of pstn.gw_ip
# - check route[PSTN] for regexp routing condition
#
# *** To enable database aliases lookup execute:
# - enable mysql
# - define WITH_ALIASDB
#
# *** To enable speed dial lookup execute:
# - enable mysql
# - define WITH_SPEEDDIAL
#
# *** To enable multi-domain support execute:
# - enable mysql
# - define WITH_MULTIDOMAIN
#
# *** To enable TLS support execute:
# - adjust CFGDIR/tls.cfg as needed
# - define WITH_TLS
#
# *** To enable XMLRPC support execute:
# - define WITH_XMLRPC
# - adjust route[XMLRPC] for access policy
#
# *** To enable anti-flood detection execute:
# - adjust pike and htable=>ipban settings as needed (default is
# block if more than 16 requests in 2 seconds and ban for 300 seconds)
# - define WITH_ANTIFLOOD
#
# *** To block 3XX redirect replies execute:
# - define WITH_BLOCK3XX
#
# *** To block 401 and 407 authentication replies execute:
# - define WITH_BLOCK401407
#
# *** To enable VoiceMail routing execute:
# - define WITH_VOICEMAIL
# - set the value of voicemail.srv_ip
# - adjust the value of voicemail.srv_port
#
# *** To enhance accounting execute:
# - enable mysql
# - define WITH_ACCDB
# - add following columns to database
#!ifdef ACCDB_COMMENT
ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT '';
ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT '';
ALTER TABLE acc ADD COLUMN src_ip varchar(64) NOT NULL default '';
ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT '';
ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT '';
ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT '';
ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT '';
ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT '';
ALTER TABLE missed_calls ADD COLUMN src_ip varchar(64) NOT NULL default '';
ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT '';
ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT '';
ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT '';
#!endif
####### Include Local Config If Exists #########
import_file "kamailio-local.cfg"
####### Defined Values #########
# *** Value defines - IDs used later in config
#!ifdef WITH_MYSQL
# - database URL - used to connect to database server by modules such
# as: auth_db, acc, usrloc, a.s.o.
#!ifndef DBURL
#!define DBURL "mysql://kamailio:kamailiorw@localhost/kamailio"
#!endif
#!endif
#!ifdef WITH_MULTIDOMAIN
# - the value for 'use_domain' parameters
#!define MULTIDOMAIN 1
#!else
#!define MULTIDOMAIN 0
#!endif
# - flags
# FLT_ - per transaction (message) flags
# FLB_ - per branch flags
#!define FLT_ACC 1
#!define FLT_ACCMISSED 2
#!define FLT_ACCFAILED 3
#!define FLT_NATS 5
#!define FLB_NATB 6
#!define FLB_NATSIPPING 7
#!ifdef WITH_TSILO
#!define FLB_TSILO 8
#!endif
####### Global Parameters #########
### LOG Levels: 3=DBG, 2=INFO, 1=NOTICE, 0=WARN, -1=ERR
#!ifdef WITH_DEBUG
debug=4
log_stderror=yes
#!else
debug=2
log_stderror=no
#!endif
fork=yes
memdbg=5
memlog=5
log_facility=LOG_LOCAL0
log_prefix="{$mt $hdr(CSeq) $ci} "
/* number of SIP routing processes for each UDP socket
* - value inherited by tcp_children and sctp_children when not set explicitely */
children=8
/* uncomment the next line to disable TCP (default on) */
# disable_tcp=yes
/* number of SIP routing processes for all TCP/TLS sockets */
# tcp_children=8
/* uncomment the next line to disable the auto discovery of local aliases
* based on reverse DNS on IPs (default on) */
# auto_aliases=no
/* add local domain aliases */
# alias="sip.mydomain.com"
/* uncomment and configure the following line if you want Kamailio to
* bind on a specific interface/port/proto (default bind on all available) */
listen=udp:185.224.139.45:5060
/* life time of TCP connection when there is no traffic
* - a bit higher than registration expires to cope with UA behind NAT */
tcp_connection_lifetime=3605
/* upper limit for TCP connections (it includes the TLS connections) */
tcp_max_connections=2048
#!ifdef WITH_TLS
enable_tls=yes
/* upper limit for TLS connections */
tls_max_connections=2048
#!endif
####### Custom Parameters #########
/* These parameters can be modified runtime via RPC interface
* - see the documentation of 'cfg_rpc' module.
*
* Format: group.id = value 'desc' description
* Access: $sel(cfg_get.group.id) or @cfg_get.group.id */
#!ifdef WITH_PSTN
/* PSTN GW Routing
*
* - pstn.gw_ip: valid IP or hostname as string value, example:
* pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address"
*
* - by default is empty to avoid misrouting */
pstn.gw_ip = "" desc "PSTN GW Address"
pstn.gw_port = "" desc "PSTN GW Port"
#!endif
#!ifdef WITH_VOICEMAIL
/* VoiceMail Routing on offline, busy or no answer
*
* - by default Voicemail server IP is empty to avoid misrouting */
voicemail.srv_ip = "" desc "VoiceMail IP Address"
voicemail.srv_port = "5060" desc "VoiceMail Port"
#!endif
####### Modules Section ########
/* set paths to location of modules */
# mpath="/usr/lib64/kamailio/modules/"
#!ifdef WITH_MYSQL
loadmodule "db_mysql.so"
#!endif
loadmodule "jsonrpcs.so"
loadmodule "kex.so"
loadmodule "corex.so"
loadmodule "tm.so"
loadmodule "tmx.so"
loadmodule "sl.so"
loadmodule "rr.so"
loadmodule "pv.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "siputils.so"
loadmodule "xlog.so"
loadmodule "sanity.so"
loadmodule "ctl.so"
loadmodule "cfg_rpc.so"
loadmodule "acc.so"
loadmodule "counters.so"
#!ifdef WITH_UAC
loadmodule "uac.so"
#!endif
#!ifdef WITH_TSILO
loadmodule "tsilo.so"
loadmodule "htable.so"
loadmodule "cfgutils.so"
loadmodule "http_client.so"
#!endif
#!ifdef WITH_AUTH
loadmodule "auth.so"
loadmodule "auth_db.so"
#!ifdef WITH_IPAUTH
loadmodule "permissions.so"
#!endif
#!endif
#!ifdef WITH_ALIASDB
loadmodule "alias_db.so"
#!endif
#!ifdef WITH_SPEEDDIAL
loadmodule "speeddial.so"
#!endif
#!ifdef WITH_MULTIDOMAIN
loadmodule "domain.so"
#!endif
#!ifdef WITH_PRESENCE
loadmodule "presence.so"
loadmodule "presence_xml.so"
#!endif
#!ifdef WITH_NAT
loadmodule "nathelper.so"
loadmodule "rtpproxy.so"
#!endif
#!ifdef WITH_TLS
loadmodule "tls.so"
#!endif
#!ifdef WITH_ANTIFLOOD
loadmodule "htable.so"
loadmodule "pike.so"
#!endif
#!ifdef WITH_XMLRPC
loadmodule "xmlrpc.so"
#!endif
#!ifdef WITH_DEBUG
loadmodule "debugger.so"
#!endif
# ----------------- setting module-specific parameters ---------------
# ----- jsonrpcs params -----
modparam("jsonrpcs", "pretty_format", 1)
/* set the path to RPC fifo control file */
# modparam("jsonrpcs", "fifo_name", "/var/run/kamailio/kamailio_rpc.fifo")
/* set the path to RPC unix socket control file */
# modparam("jsonrpcs", "dgram_socket", "/var/run/kamailio/kamailio_rpc.sock")
# ----- ctl params -----
/* set the path to RPC unix socket control file */
# modparam("ctl", "binrpc", "unix:/var/run/kamailio/kamailio_ctl")
# ----- sanity params -----
modparam("sanity", "autodrop", 0)
# ----- tm params -----
# auto-discard branches from previous serial forking leg
modparam("tm", "failure_reply_mode", 3)
# default retransmission timeout: 30sec
modparam("tm", "fr_timer", 30000)
# default invite retransmission timeout after 1xx: 120sec
modparam("tm", "fr_inv_timer", 120000)
# ----- rr params -----
# set next param to 1 to add value to ;lr param (helps with some UAs)
modparam("rr", "enable_full_lr", 1)
# do not append from tag to the RR (no need for this script)
#!ifdef WITH_UAC
modparam("rr", "append_fromtag", 1)
#!else
modparam("rr", "append_fromtag", 0)
#!endif
# ----- registrar params -----
modparam("registrar", "method_filtering", 1)
/* uncomment the next line to disable parallel forking via location */
modparam("registrar", "append_branches", 0)
/* uncomment the next line not to allow more than 10 contacts per AOR */
modparam("registrar", "max_contacts", 1)
/* max value for expires of registrations */
modparam("registrar", "max_expires", 3600)
/* set it to 1 to enable GRUU */
modparam("registrar", "gruu_enabled", 0)
# ----- acc params -----
/* what special events should be accounted ? */
modparam("acc", "early_media", 0)
modparam("acc", "report_ack", 0)
modparam("acc", "report_cancels", 0)
/* by default ww do not adjust the direct of the sequential requests.
* if you enable this parameter, be sure the enable "append_fromtag"
* in "rr" module */
modparam("acc", "detect_direction", 0)
/* account triggers (flags) */
modparam("acc", "log_flag", FLT_ACC)
modparam("acc", "log_missed_flag", FLT_ACCMISSED)
modparam("acc", "log_extra",
"src_user=$fU;src_domain=$fd;src_ip=$si;"
"dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
modparam("acc", "failed_transaction_flag", FLT_ACCFAILED)
/* enhanced DB accounting */
#!ifdef WITH_ACCDB
modparam("acc", "db_flag", FLT_ACC)
modparam("acc", "db_missed_flag", FLT_ACCMISSED)
modparam("acc", "db_url", DBURL)
modparam("acc", "db_extra",
"src_user=$fU;src_domain=$fd;src_ip=$si;"
"dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
#!endif
# ----- usrloc params -----
/* enable DB persistency for location entries */
#!ifdef WITH_USRLOCDB
modparam("usrloc", "db_url", DBURL)
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "use_domain", MULTIDOMAIN)
#!endif
# ----- auth_db params -----
#!ifdef WITH_AUTH
modparam("auth_db", "db_url", DBURL)
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "load_credentials", "")
modparam("auth_db", "use_domain", MULTIDOMAIN)
# ----- permissions params -----
#!ifdef WITH_IPAUTH
modparam("permissions", "db_url", DBURL)
modparam("permissions", "db_mode", 1)
#!endif
#!endif
# ----- alias_db params -----
#!ifdef WITH_ALIASDB
modparam("alias_db", "db_url", DBURL)
modparam("alias_db", "use_domain", MULTIDOMAIN)
#!endif
# ----- speeddial params -----
#!ifdef WITH_SPEEDDIAL
modparam("speeddial", "db_url", DBURL)
modparam("speeddial", "use_domain", MULTIDOMAIN)
#!endif
# ----- domain params -----
#!ifdef WITH_MULTIDOMAIN
modparam("domain", "db_url", DBURL)
/* register callback to match myself condition with domains list */
modparam("domain", "register_myself", 1)
#!endif
#!ifdef WITH_PRESENCE
# ----- presence params -----
modparam("presence", "db_url", DBURL)
# ----- presence_xml params -----
modparam("presence_xml", "db_url", DBURL)
modparam("presence_xml", "force_active", 1)
#!endif
#!ifdef WITH_NAT
# ----- rtpproxy params -----
modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722")
# ----- nathelper params -----
modparam("nathelper", "natping_interval", 30)
modparam("nathelper", "ping_nated_only", 1)
modparam("nathelper", "sipping_bflag", FLB_NATSIPPING)
modparam("nathelper", "sipping_from", "sip:pinger@kamailio.org")
# params needed for NAT traversal in other modules
modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)")
modparam("usrloc", "nat_bflag", FLB_NATB)
#!endif
#!ifdef WITH_TLS
# ----- tls params -----
modparam("tls", "config", "/etc/kamailio/tls.cfg")
#!endif
#!ifdef WITH_ANTIFLOOD
# ----- pike params -----
modparam("pike", "sampling_time_unit", 2)
modparam("pike", "reqs_density_per_unit", 16)
modparam("pike", "remove_latency", 4)
# ----- htable params -----
/* ip ban htable with autoexpire after 5 minutes */
modparam("htable", "htable", "ipban=>size=8;autoexpire=300;")
#!endif
#!ifdef WITH_XMLRPC
# ----- xmlrpc params -----
modparam("xmlrpc", "route", "XMLRPC");
modparam("xmlrpc", "url_match", "^/RPC")
#!endif
#!ifdef WITH_DEBUG
# ----- debugger params -----
modparam("debugger", "cfgtrace", 1)
modparam("debugger", "log_level_name", "exec")
#!endif
#!ifdef WITH_UAC
modparam("uac", "reg_contact_addr", "pn.telesonique.ch:5060;transport=udp")
modparam("uac", "reg_db_url", DBURL)
modparam("uac", "reg_timer_interval", 60)
modparam("uac", "reg_retry_interval", 300)
modparam("uac", "reg_db_table", "uacreg")
#!endif
#!ifdef WITH_TSILO
modparam("htable", "htable", "vtp=>size=10;autoexpire=180")
modparam("http_client", "httpcon", "pushapi=>https://www.myswissline.com")
#!endif
####### Routing Logic ########
/* Main SIP request routing logic
* - processing of any incoming SIP request starts with this route
* - note: this is the same as route { ... } */
request_route {
# per request initial checks
route(REQINIT);
# NAT detection
route(NATDETECT);
# CANCEL processing
if (is_method("CANCEL")) {
if (t_check_trans()) {
route(RELAY);
}
exit;
}
# handle retransmissions
if (!is_method("ACK")) {
if(t_precheck_trans()) {
t_check_trans();
exit;
}
t_check_trans();
}
# handle requests within SIP dialogs
route(WITHINDLG);
### only initial requests (no To tag)
# authentication
route(AUTH);
# record routing for dialog forming requests (in case they are routed)
# - remove preloaded route headers
remove_hf("Route");
if (is_method("INVITE|SUBSCRIBE")) {
record_route();
}
# account only INVITEs
if (is_method("INVITE")) {
setflag(FLT_ACC); # do accounting
}
if (is_method("REGISTER")) {
save("location", "0x06");
}
# dispatch requests to foreign domains
route(SIPOUT);
### requests for my local domains
# handle presence related requests
route(PRESENCE);
# handle registrations
route(REGISTRAR);
if ($rU==$null) {
# request with no Username in RURI
sl_send_reply("484","Address Incomplete");
exit;
}
# dispatch destinations to PSTN
route(PSTN);
# user location service
route(LOCATION);
}
# Wrapper for relaying requests
route[RELAY] {
# enable additional event routes for forwarded requests
# - serial forking, RTP relaying handling, a.s.o.
if (is_method("INVITE|BYE|SUBSCRIBE|UPDATE")) {
if(!t_is_set("branch_route")) t_on_branch("MANAGE_BRANCH");
}
if (is_method("INVITE|SUBSCRIBE|UPDATE")) {
if(!t_is_set("onreply_route")) t_on_reply("MANAGE_REPLY");
}
if (is_method("INVITE")) {
if(!t_is_set("failure_route")) t_on_failure("MANAGE_FAILURE");
}
#james
set_forward_no_connect();
if (!t_relay()) {
sl_reply_error();
}
#!ifdef WITH_TSILO
else if(isflagset(FLB_TSILO)) {
resetflag(FLB_TSILO);
if (ts_store()) {
$sht(tsilo=>stored::$rU) = 1;
xdbg("stored transaction [$T(id_index):$T(id_label)] $fU => $rU\n");
}
route(PUSH_NOTIF);
}
#!endif
exit;
}
# Per SIP request initial checks
route[REQINIT] {
# no connect for sending replies
#set_reply_no_connect();
#!ifdef WITH_ANTIFLOOD
# flood detection from same IP and traffic ban for a while
# be sure you exclude checking trusted peers, such as pstn gateways
# - local host excluded (e.g., loop to self)
if(src_ip!=myself) {
if($sht(ipban=>$si)!=$null) {
# ip is already blocked
xdbg("request from blocked IP - $rm from $fu (IP:$si:$sp)\n");
exit;
}
if (!pike_check_req()) {
xlog("L_ALERT","ALERT: pike blocking $rm from $fu (IP:$si:$sp)\n");
$sht(ipban=>$si) = 1;
exit;
}
}
#!endif
if($ua =~ "friendly-scanner|sipcli|sipvicious|VaxSIPUserAgent") {
# silent drop for scanners - uncomment next line if want to reply
# sl_send_reply("200", "OK");
exit;
}
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
}
if(is_method("OPTIONS") && uri==myself && $rU==$null) {
sl_send_reply("200","Keepalive");
exit;
}
if(!sanity_check("17895", "7")) {
xlog("Malformed SIP request from $si:$sp\n");
exit;
}
}
# Handle requests within SIP dialogs
route[WITHINDLG] {
if (!has_totag()) return;
# sequential request withing a dialog should
# take the path determined by record-routing
if (loose_route()) {
route(DLGURI);
if (is_method("BYE")) {
setflag(FLT_ACC); # do accounting ...
setflag(FLT_ACCFAILED); # ... even if the transaction fails
} else if ( is_method("ACK") ) {
# ACK is forwarded statelessly
route(NATMANAGE);
} else if ( is_method("NOTIFY") ) {
# Add Record-Route for in-dialog NOTIFY as per RFC 6665.
record_route();
}
route(RELAY);
exit;
}
if (is_method("SUBSCRIBE") && uri == myself) {
# in-dialog subscribe requests
route(PRESENCE);
exit;
}
if ( is_method("ACK") ) {
if ( t_check_trans() ) {
# no loose-route, but stateful ACK;
# must be an ACK after a 487
# or e.g. 404 from upstream server
route(RELAY);
exit;
} else {
# ACK without matching transaction ... ignore and discard
exit;
}
}
sl_send_reply("404","Not here");
exit;
}
# Handle SIP registrations
route[REGISTRAR] {
if (!is_method("REGISTER")) return;
if(isflagset(FLT_NATS)) {
setbflag(FLB_NATB);
#!ifdef WITH_NATSIPPING
# do SIP NAT pinging
setbflag(FLB_NATSIPPING);
#!endif
}
save("location", "0x06");
switch($rc) {
case -1:
case -2:
sl_reply_error();
break;
#!ifdef WITH_TSILO
case 1:
$var(new_contact) = 1;
#!endif
}
#!ifdef WITH_TSILO
if ($var(new_contact))
route(WAKE_SUSPENDED);
#!endif
exit;
}
#!ifdef WITH_TSILO
route[WAKE_SUSPENDED]
{
$var(suspended) = 0;
lock("$tU");
$var(suspended) = $sht(tsilo=>suspended::$tU);
$sht(tsilo=>suspended::$tU) = $null;
$var(stored) = $sht(tsilo=>stored::$tU);
unlock("$tU");
if ($var(suspended) == 0) {
if ($var(stored)) {
# no suspended INVITE (i.e. there was at least one
# registered contact for target) and 'stored' set
# (i.e. ongoing transaction) -> this newly just
# registered contact needs alerting.
ts_append("location", "$tu");
}
return;
}
$var(id_index) = $(var(suspended){s.select,0,:}{s.int});
$var(id_label) = $(var(suspended){s.select,1,:}{s.int});
xdbg("resuming trasaction [$var(id_index):$var(id_label)] $tU .\n");
t_continue("$var(id_index)", "$var(id_label)", "RESUME");
}
route[RESUME]
{
if(! lookup("location")) {
xlog("failed to load just added destinations\n");
exit;
}
setflag(FLB_TSILO);
route(RELAY);
}
#!endif
# User location service
route[LOCATION] {
#!ifdef WITH_SPEEDDIAL
# search for short dialing - 2-digit extension
if($rU=~"^[0-9][0-9]$") {
if(sd_lookup("speed_dial")) {
route(SIPOUT);
}
}
#!endif
#!ifdef WITH_ALIASDB
# search in DB-based aliases
if(alias_db_lookup("dbaliases")) {
route(SIPOUT);
}
#!endif
$avp(oexten) = $rU;
if (!lookup("location")) {
$var(rc) = $rc;
#!ifdef WITH_TSILO
send_reply("100", "Trying");
route(SUSPEND);
route(PUSH_NOTIF);
#!else
route(TOVOICEMAIL);
t_newtran();
switch ($var(rc)) {
case -1:
case -3:
send_reply("404", "Not Found");
exit;
case -2:
send_reply("405", "Method Not Allowed");
exit;
}
#!endif
}
# when routing via usrloc, log the missed calls also
if (is_method("INVITE")) {
setflag(FLT_ACCMISSED);
}
#!ifdef WITH_TSILO
setflag(FLB_TSILO);
#!endif
route(RELAY);
exit;
}
#!ifdef WITH_TSILO
route[SUSPEND]
{
if(! t_suspend()) {
xlog("SUSPEND: failed to suspend transaction.\n");
# TODO: actually, the destination is not really checked: don't know if it's
# own subscriber or invalid dialing in the first place.
send_reply("503", "Temporarily unavailable");
exit;
}
$sht(tsilo=>suspended::$rU) = $_s($T(id_index):$T(id_label));
xdbg("suspended transaction [$T(id_index):$T(id_label)] $fU => $rU\n");
}
route[PUSH_NOTIF]
{
xdbg("TODO: send push for $rU\n");
$var(res) = http_connect("pushapi", "/send_push.php?username=$tU&dev=1", "application/json", "", "$avp(gurka)");
xlog("L_INFO", "Push notification: $avp(gurka) Result code $var(res)\n");
if ($var(res)==200) {
if ($var(gurka)=~"^.*rejected.*$") {
sl_send_reply("503", "Not available right now");
}
else {
sl_send_reply("101", "Push Sent");
}
}
if ($var(res)==28) {
xlog("L_INFO", "Push notification timed out. Do we care?");
}
exit;
}
#!endif
# Presence server processing
route[PRESENCE] {
if(!is_method("PUBLISH|SUBSCRIBE")) return;
if(is_method("SUBSCRIBE") && $hdr(Event)=="message-summary") {
route(TOVOICEMAIL);
# returns here if no voicemail server is configured
sl_send_reply("404", "No voicemail service");
exit;
}
#!ifdef WITH_PRESENCE
if (!t_newtran()) {
sl_reply_error();
exit;
}
if(is_method("PUBLISH")) {
handle_publish();
t_release();
} else if(is_method("SUBSCRIBE")) {
handle_subscribe();
t_release();
}
exit;
#!endif
# if presence enabled, this part will not be executed
if (is_method("PUBLISH") || $rU==$null) {
sl_send_reply("404", "Not here");
exit;
}
return;
}
# IP authorization and user authentication
route[AUTH] {
#!ifdef WITH_AUTH
#!ifdef WITH_TSILO
return;
#!endif
#!ifdef WITH_IPAUTH
if((!is_method("REGISTER")) && allow_source_address()) {
# source IP allowed
return;
}
#!endif
if (is_method("REGISTER") || from_uri==myself) {
# authenticate requests
if (!auth_check("$fd", "subscriber", "1")) {
auth_challenge("$fd", "0");
exit;
}
# user authenticated - remove auth header
if(!is_method("REGISTER|PUBLISH"))
consume_credentials();
}
# if caller is not local subscriber, then check if it calls
# a local destination, otherwise deny, not an open relay here
if (from_uri!=myself && uri!=myself) {
sl_send_reply("403","Not relaying");
exit;
}
#!else
# authentication not enabled - do not relay at all to foreign networks
if(uri!=myself) {
sl_send_reply("403","Not relaying");
exit;
}
#!endif
return;
}
# Caller NAT detection
route[NATDETECT] {
#!ifdef WITH_NAT
force_rport();
if (nat_uac_test("19")) {
if (is_method("REGISTER")) {
fix_nated_register();
} else {
if(is_first_hop()) {
set_contact_alias();
}
}
setflag(FLT_NATS);
}
#!endif
return;
}
# RTPProxy control and signaling updates for NAT traversal
route[NATMANAGE] {
#!ifdef WITH_NAT
if (is_request()) {
if(has_totag()) {
if(check_route_param("nat=yes")) {
setbflag(FLB_NATB);
}
}
}
if (!(isflagset(FLT_NATS) || isbflagset(FLB_NATB))) return;
if(nat_uac_test("8")) {
rtpproxy_manage("co");
} else {
rtpproxy_manage("cor");
}
if (is_request()) {
if (!has_totag()) {
if(t_is_branch_route()) {
add_rr_param(";nat=yes");
}
}
}
if (is_reply()) {
if(isbflagset(FLB_NATB)) {
if(is_first_hop())
set_contact_alias();
}
}
if(isbflagset(FLB_NATB)) {
# no connect message in a dialog involving NAT traversal
if (is_request()) {
if(has_totag()) {
set_forward_no_connect();
}
}
}
#!endif
return;
}
# URI update for dialog requests
route[DLGURI] {
#!ifdef WITH_NAT
if(!isdsturiset()) {
handle_ruri_alias();
}
#!endif
return;
}
# Routing to foreign domains
route[SIPOUT] {
if (uri==myself) return;
append_hf("P-hint: outbound\r\n");
route(RELAY);
exit;
}
# PSTN GW routing
route[PSTN] {
#!ifdef WITH_PSTN
# check if PSTN GW IP is defined
if (strempty($sel(cfg_get.pstn.gw_ip))) {
xlog("SCRIPT: PSTN routing enabled but pstn.gw_ip not defined\n");
return;
}
# route to PSTN dialed numbers starting with '+' or '00'
# (international format)
# - update the condition to match your dialing rules for PSTN routing
if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$")) return;
# only local users allowed to call
if(from_uri!=myself) {
sl_send_reply("403", "Not Allowed");
exit;
}
# normalize target number for pstn gateway
# - convert leading 00 to +
if (starts_with("$rU", "00")) {
strip(2);
prefix("+");
}
if (strempty($sel(cfg_get.pstn.gw_port))) {
$ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip);
} else {
$ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip) + ":"
+ $sel(cfg_get.pstn.gw_port);
}
route(RELAY);
exit;
#!endif
return;
}
# XMLRPC routing
#!ifdef WITH_XMLRPC
route[XMLRPC] {
# allow XMLRPC from localhost
if ((method=="POST" || method=="GET")
&& (src_ip==127.0.0.1)) {
# close connection only for xmlrpclib user agents (there is a bug in
# xmlrpclib: it waits for EOF before interpreting the response).
if ($hdr(User-Agent) =~ "xmlrpclib")
set_reply_close();
set_reply_no_connect();
dispatch_rpc();
exit;
}
send_reply("403", "Forbidden");
exit;
}
#!endif
# Routing to voicemail server
route[TOVOICEMAIL] {
#!ifdef WITH_VOICEMAIL
if(!is_method("INVITE|SUBSCRIBE")) return;
# check if VoiceMail server IP is defined
if (strempty($sel(cfg_get.voicemail.srv_ip))) {
xlog("SCRIPT: VoiceMail routing enabled but IP not defined\n");
return;
}
if(is_method("INVITE")) {
if($avp(oexten)==$null) return;
$ru = "sip:" + $avp(oexten) + "@" + $sel(cfg_get.voicemail.srv_ip)
+ ":" + $sel(cfg_get.voicemail.srv_port);
} else {
if($rU==$null) return;
$ru = "sip:" + $rU + "@" + $sel(cfg_get.voicemail.srv_ip)
+ ":" + $sel(cfg_get.voicemail.srv_port);
}
route(RELAY);
exit;
#!endif
return;
}
# Manage outgoing branches
branch_route[MANAGE_BRANCH] {
xdbg("new branch [$T_branch_idx] to $ru\n");
route(NATMANAGE);
}
# Manage incoming replies
reply_route {
if(!sanity_check("17604", "6")) {
xlog("Malformed SIP response from $si:$sp\n");
drop;
}
}
# Manage incoming replies in transaction context
onreply_route[MANAGE_REPLY] {
xdbg("incoming reply\n");
if(status=~"[12][0-9][0-9]") {
route(NATMANAGE);
}
}
# Manage failure routing cases
failure_route[MANAGE_FAILURE] {
route(NATMANAGE);
if (t_is_canceled()) exit;
#!ifdef WITH_BLOCK3XX
# block call redirect based on 3xx replies.
if (t_check_status("3[0-9][0-9]")) {
t_reply("404","Not found");
exit;
}
#!endif
#!ifdef WITH_BLOCK401407
# block call redirect based on 401, 407 replies.
if (t_check_status("401|407")) {
t_reply("404","Not found");
exit;
}
#!endif
#!ifdef WITH_VOICEMAIL
# serial forking
# - route to voicemail on busy or no answer (timeout)
if (t_check_status("486|408")) {
$du = $null;
route(TOVOICEMAIL);
exit;
}
#!endif
}