Hi Karim,

Thank you for your advice. Noted your advice.

Yes. My objective here is once the SER receives a REGISTER message from one of the client, it will auto generate "INVITE" messages to the clients.

I am using the ser-0.9.6. I have looked through the coding as such

/ser-0.9.6/modules/nathelper/nathelper.c

/ser-0.9.6/modules/nathelper/nathelper.cfg

/ser-0.9.6/modules/nathelper/nathelper_rrtpp.cfg

/ser-0.9.6/modules/registrar/save.c

/ser-0.9.6/modules/registrar/reply.c

/ser-0.9.6/modules/registrar/sip_msg.c

Anyone knows where can i find the portion where once the SER receives the REGISTER message, it responds with 200 OK to the client? Can i find them inside nathelper or registrar or paser?

Apologies if any inconvenience caused.

Thank you.

Regards,
Tee Yong

Well, first of all a SER server does not generate messages it only interprets the messages it receives. so it can not generate INVITE messages. so if you want to call several clients from one client, this one has to initiate the call by sending an INVITE to SER.

When receiving the INVITE message, SER will forward it to the callees. i did not try this yet, but i think that you can do this with the method : "forward" as follows:

if(method == INVITE) {
         forward("callee1_IP_address","callee1_port");
         forward("callee2_IP_address","callee2_port");
         forward("callee3_IP_address","callee3_port");
         #and so on ...
}

try this for example... and let me know if it works or not.

ps: (personnally i think it won't work :p)

2007/3/3, Goh, Tee-Yong < gohty@m1.com.sg>:

Hi Karim,

Yes you are right.
Please advice.

Thank you.

Regards,
Howard

-----Original Message-----
From: karim basraoui [mailto:basraouik@gmail.com]
Sent: Saturday, March 03, 2007 8:01 PM
To: Goh, Tee-Yong

Cc: serusers@lists.iptel.org
Subject: Re: [Serusers] SIP SER

So if i understand, when a clint registers, SER will automatically send invites to the other clients and make connections with them?

2007/3/3, Goh, Tee-Yong < gohty@m1.com.sg>:

Dear Karim,

Thank you for your reply.

Yes you are right. I have having difficulty searching for this for past 2 months.

Yes. Here is what i want. Once i receive the REGISTER messages, my SER will send out "INVITE" message to my other clients. This is what i am intended to do. However, i could not search for the right coding inside the ser-0.9.6.

Please advice and apologies if any inconvenience caused for you.

Thanks.

Regards,
Howard

-----Original Message-----
From: karim basraoui [mailto:basraouik@gmail.com]
Sent: Saturday, March 03, 2007 7:18 PM
To: Goh, Tee-Yong
Subject: Re: [Serusers] SIP SER

Hi,

Do you want to make changes on SER behaviour when it receives REGISTER messages. If it's the case you can make a condition in the "ser.cfg" file, in the bloc "route{ ... }". for example:
route {
          if (method == "REGISTER")
          { #what you want to do};
        }

2007/3/3, Goh, Tee-Yong <gohty@m1.com.sg >:

Hi,

May i know from the SER-0.9.6, where can i look for and make changes for the SER when receiving "REGISTER" message and responsing " 200 OK" back to the corresponding node or clients?

Would appreciate your assistance and advice as soon as possible as i have difficultly locating the coding. Please advice where i can find the script to edit the above mentioned messages.

Apologies for the inconvenience caused.

Thank you.

Regards,
Howard

This email (including any attachment) is subject to the following disclaimer: http://m1.com.sg/M1/misc/disclaimer

_______________________________________________
Serusers mailing list
Serusers@lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers

--
BASRAOUI Karim
www.basraouik.afrikart.net

This email (including any attachment) is subject to the following disclaimer: http://m1.com.sg/M1/misc/disclaimer

--
BASRAOUI Karim
www.basraouik.afrikart.net

This email (including any attachment) is subject to the following disclaimer: http://m1.com.sg/M1/misc/disclaimer

--
BASRAOUI Karim
www.basraouik.afrikart.net