Hi Kevin.I use Kamailio as FreeSwitch set balancer almost without rtpengine (rtpengine is used only in some specific cases). All in public IPs.I just tune FS SIP profile to let it get requests only from Kamailio IP:PORT and add same firewall rules also.All RPC commands work via local interface only.PUBLIC NET SIP-Phone ==> Kamailio(PUBLIC) ==> FS(PUBLIC) ==> Kamailio(PUBLIC) ==> Carrier_______________________________________________On 16 August 2018 at 12:57, Kevin Olbrich <ko@sv01.de> wrote:Hi!I am working successfully with Kamailio in my lab setup where Kamailio is the SBC for Asterisk.The network layout is looking like this:SIP-Phone <== PUBLIC NET ==> Kamailio (SBC) <== PRIVATE NET ==> Asterisk <== PUBLIC NET ==> CarrierEach public network is reachable from the internet and has a local firewall with IP whitelists.The internal SIP transactions are UDP-only but for external phones I would like to also listen for TCP/TLS.For this layout to work with rtpproxy (before we move on to RTPengine), we have to enable mhomed in Kamailio.We also have some routing issues with packets leaving with the wrong IP via rtpproxy (when call between carrier and external phone needs to be bridged).Most examples show that Asterisk is deployed on the same network as the external interface of Kamailio (-> Asterisk exposed to the public network).In our tests, this works much better but I have great security concerns because this Asterisk instance itself does not need to be reachable from external.How do other users deploy Kamailio in front of Asterisk or similar as SBC to secure internals?There is lot of docs for Kamailio's config but IMHO less for the setup as DMZ (SBC) proxy.Thank you very much.Kind regardsKevin
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--Savolainen Dmitri
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users