Thank you very much！ Friend!
It is big help for me!
王振中 wangzz
艾诺通信系统（苏州）有限责任公司
苏州工业园区国际科技园一期
============================================
发件人: Allan
Chao ( ?w廷睿 ) [mailto:AllanChao@taiwanmobile.com]
发送时间:
收件人: WANG Zhenzhong; serusers@lists.iptel.org
主题: RE: [Serusers] sip register problem SER behind NAT
For example:
debug=3
# debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=yes #
(cmd line: -E)
log_facility=LOG_LOCAL0
listen=eth1:5060
listen=eth0:5060
children=2
check_via=no
# (cmd. line: -v)
dns=off
# (cmd. line: -r)
rev_dns=off
# (cmd. line: -R)
port=5060
alias=".your ip
address"
#module loading
XXXX
#module setting
XXXX
#################################
route
{
if (uri==myself)
{
if (method=="REGISTER")
{
save("location");
exit;
};
}
}
SER will see your alias in
the “uri==myself “ or anther way is blanked out this line to let SER do
not check your domain
Ps : you can refer
http://www.opensips.org/index.php?n=Resources.Documentation
, it is like SER and there are some instructions
From: WANG Zhenzhong
[mailto:wangzz@avonaco.com]
Sent: Friday, December 19, 2008
11:39 AM
To: Allan Chao ( ?w廷睿
); serusers@lists.iptel.org
Subject: 氮?`:
[Serusers] sip register problem SER behind NAT
Thank you very much.
But how set the alias.
Can you give me
example of ser.cfg.
Thanks.
王振中 wangzz
艾诺通信系统（苏州）有限责任公司
苏州工业园区国际科技园一期
============================================
发件人: Allan
Chao ( ?w廷睿 ) [mailto:AllanChao@taiwanmobile.com]
发送时间:
收件人: WANG Zhenzhong; serusers@lists.iptel.org
主题: RE: [Serusers] sip register problem SER behind NAT
This is because SER can’t
understand this IP, Maybe you can set alias to 122.194.
BR,
Allan
From:
serusers-bounces@lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of WANG Zhenzhong
Sent: Friday, December 19, 2008 10:28
AM
To: serusers@lists.iptel.org
Subject: [Serusers] sip register
problem SER behind NAT
I set the SER behind a NAT.
The SER’s private IP is 192.168.9.88
The NAT’s public IP is 122.194.106.139
I use the eyebeam to register to SER from internet
via the NAT address.
But when the SER receive the register message, it
find the IP(122.194.106.139) in “To” & “from” line is different from the
local IP(192.168.9.88),
So the SER forward the register message and the
register is failed.
How solve this problem. Thanks.
王振中 wangzz
艾诺通信系统（苏州）有限责任公司
苏州工业园区国际科技园一期
============================================
DISCLAIMER:
This message (and any attachments) may contain information that is confidential,
proprietary, privileged or otherwise protected by law. The message is intended
solely for the named addressee (or a person responsible for delivering it to
the addressee). If you are not the intended recipient of this message, you are
not authorized to read, print, retain, copy or disseminate this message or any
part of it. If you have received this message in error, please destroy the
message or delete it from your system immediately and notify the sender.
DISCLAIMER:
This message (and any attachments) may contain information that is
confidential, proprietary, privileged or otherwise protected by law. The
message is intended solely for the named addressee (or a person responsible for
delivering it to the addressee). If you are not the intended recipient of this
message, you are not authorized to read, print, retain, copy or disseminate
this message or any part of it. If you have received this message in error,
please destroy the message or delete it from your system immediately and notify
the sender.