On 3/21/07, Daniel-Constantin Mierla <daniel@voice-system.ro> wrote:

Hello,

do you use same configs as in published tests? The UAS is another
openser with just sending a 200 ok reply or sipp with uas scenario?

First check what is the capacity of sipp -- make a very simple config
with just sl_send_reply("200","ok") in main route and start sipp. See
what results you get and that should be the reference for sipp capacity.
Also, try to use multiple instances of sipp, from different servers, see
if you get the cumulative value better.

The tests were done on Core2 processor, and parallel execution of
openser processes has some impact as well.

Cheers,
Daniel

On 03/21/07 16:52, Sergio Gutierrez wrote:
> Hi.
>
> Currently I am installing Openser 1.2.0 on a Sun Fire T2000 running
> Solaris 10.
> Although I used an optimized version of GCC for SPARC Systems, and
> used the recommended settings to generate accurate code for my
> Processor (UltraSPARC T1), the results of the performance tests are
> just 50% of the presented ones on the web page.
>
> My setup is the following:
>
> Proxy and UAS: Sun Fire T2000, 8 GB RAM, 1 UltraSPARC T1 1.2 GHZ 6 Core.
> UAC's: Two domain of a Sun Fire 12K, 4 GB RAM, 4 UlraSPARC III+ 900 Mhz
> Software versions listed as on the webpage.
>
> openser -V output:
> version: openser 1.2.0-notls (sparc/solaris)
> flags: STATS: Off, USE_IPV6, USE_TCP, DISABLE_NAGLE, USE_MCAST,
> SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC, FAST_LOCK-ADAPTIVE_WAIT-NOSMP
> ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16,
> MAX_URI_SIZE 1024, BUF_SIZE 65535
> poll method support: poll, select, /dev/poll.
> svnrevision: unknown
> @(#) $Id: main.c 1827 2007-03-12 15:22:53Z bogdan_iancu $
> main.c compiled on 21:43:51 Mar 19 2007 with gcc 4.0.3
>
>
> I would thank any idea about how could I improve the performnace of my
> setup. I think that because of the hardware specifications, the result
> should be at least equal than listed.
>
> Thanks in advance.
>
> Kind regards.
>
> Sergio Gutiérrez.
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Users mailing list
> Users@openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>