Did you set them to the public IP address (elastic IP or whatever) on each of them.

Since you are natted, I guess you are using the listen=udp x.x.x.x advertise x.x.x.x
parameter.

similar IP preset is needed in this case.

On Mon, Jun 17, 2019 at 12:00 PM Julien Chavanton <jchavanton@gmail.com> wrote:
Can you share the settings you are using :

modparam("dmq", "server_address", "?")
modparam("dmq", "notification_address", "?")

On Mon, Jun 17, 2019 at 11:30 AM <jenus@cyberchaos.nl> wrote:
Hi all,

Is there any other way to filter DMQ peers? I now have a issue with
dmq_usrloc when running in a docker container. When the node comes
online the peer is sending the KDMQ usrloc packet (with the registered
contacts) to the internal container ip and not the actual external ip.
Both ip's show up as DMQ peers, after a few keepalive failures the dmq
peer with the internal container ip becomes inactive and no updates are
sent to that peer. But the usrloc sync seems to happen before the peer
is inactive.

I tried to strip the peers with the internal container ip's, this works
for the requests, but i'm not able to fix this for the responses.

Thanks,

Jan

jenus@cyberchaos.nl schreef op 2019-05-02 08:59:
> Hi all,
>
> I'm trying to run a kamailio DMQ node inside a docker container. All
> works fine but i have one issue with DMQ. Since the kamailio process
> inside the container is behind a nat i have set the advertise address
> to the external ip, this works fine for the via headers but DMQ keeps
> sending the internal interface in the KDMQ notification_peer messages.
> The external ip is in there as well. Example:
>
> SIP/2.0 200 OK
> Via: SIP/2.0/UDP
> 10.10.10.13;branch=z9hG4bK2dcb.c6326de2000000000000000000000000.0
> To:
> <sip:notification_peer@10.10.10.94:5060>;tag=616b7acb681ed5e9cbc485b3faa09d62.0a3d
> From:
> <sip:notification_peer@10.10.10.13:5060>;tag=e8f29c06c4b85a188f6533f08d60feb6-ff29
> CSeq: 10 KDMQ
> Call-ID: 17042656602ca532-23367@x.x.x.x
> Content-Type: text/plain
> Server: kamailio (5.1.4 (x86_64/linux))
> Content-Length: 222
>
> sip:10.10.10.13:5060;status=active
> sip:10.10.10.12:5060;status=active
> sip:10.10.10.92:5060;status=active
> sip:10.10.10.93:5060;status=active
> sip:10.10.10.94:5060;status=active   <-- entry for container external
> ip
> sip:172.17.0.2:5060;status=disabled  <-- entry for container internal
> ip
>
>
> I tried to strip this entry using the replace_body_atonce in the
> tm:local-request route. This works fine for the KDMQ request, but when
> i try to remove the same line from 200OK responses that are send out
> as a response to incomming KDMQ messages this seems to fail. I use the
> following code:
>
> # Working code (for outgoing KDMQ requests):
> event_route [tm:local-request]
> {
>   if(is_method("KDMQ") && $rU == "notification_peer")
>         replace_body_atonce("sip:172.17.0.*:5060;status=.*", "");
> }
>
> # Failing code (for 200OK responses):
> reply_route
> {
>   xlog("L_ALERT", "REPLY: Sending out reply, tU is $tU  rs is $rs\n");
>   if ($rs == "200" && $tU == "notification_peer")
>   {
>         replace_body_atonce("sip:172.17.0.*:5060;status=.*", "");
>   }
> }
>
>
> I'm running kamailio 5.1.4. Is there a way to strip a line from the
> body of a local generated 200OK response? Or is there a way to avoid
> that DMQ inserts the internal container ip in the first place.
>
>
> Thanks,
>
> Jan Hazenberg
>
>
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users@lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users


_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users