Hi Emil,
Thanks for your infor.
I tried and it still didn't work. Now I doubt if
the /etc/ser/ser.cfg (see the following) takes effect or not. I changed the
settings and if I ran the server by command ' # ser ', no problem. But
if I ran it like ' # ser -f ser.cfg ', then it told me
ERROR: bad config file (11 errors)
Actually I didn't change too much on the default
ser.cfg.
Pls indicate.
_________________________________________________________________________________
#
# $Id: ser.cfg,v 1.12 2002/10/21 02:40:06 jiri
Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters
------------------------
debug=9
# debug level (cmd line: -dddddddddd)
fork=no
log_stderror=no # (cmd line:
-E)
check_via=no # (cmd. line:
-v)
dns=no #
(cmd. line: -r)
rev_dns=no # (cmd. line:
-R)
port=5060
children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading
----------------------------------
# Uncomment this if you want to use SQL
database
#loadmodule "//usr/lib/ser/modules/mysql.so"
loadmodule
"//usr/lib/ser/modules/sl.so"
loadmodule
"//usr/lib/ser/modules/tm.so"
loadmodule
"//usr/lib/ser/modules/rr.so"
loadmodule
"//usr/lib/ser/modules/maxfwd.so"
loadmodule
"//usr/lib/ser/modules/usrloc.so"
loadmodule
"//usr/lib/ser/modules/registrar.so"
# Uncomment this if you want digest
authentication
# mysql.so must be loaded !
#loadmodule
"//usr/lib/ser/modules/auth.so"
# ----------------- setting module-specific
parameters ---------------
# -- usrloc params --
modparam("usrloc", "db_mode",
0)
# Uncomment this if you want to use SQL
database
# for persistent storage and comment the previous
line
#modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using
auth module
#
#modparam("auth", "secret",
"alsdkhglaksdhfkloiwr")
#modparam("auth", "calculate_ha1", yes)
#
# If
you set "calculate_ha1" parameter to yes (which true in this config),
#
uncomment also the following parameter)
#
#modparam("auth",
"password_column", "password")
# ------------------------- request routing
logic -------------------
# main routing logic
route{
#
initial sanity checks -- messages
with
# max_forwars==0, or
excessively long requests
if
(!mf_process_maxfwd_header("10"))
{
sl_send_reply("483","Too Many
Hops");
break;
};
if (len_gt( max_len ))
{
sl_send_reply("513", "Message too
big");
break;
};
# Do
strict routing if pre-loaded route headers
present
rewriteFromRoute();
# if the
request is for other domain use
UsrLoc
# (in case, it does not
work, use the following command
#
with proper names and addresses in
it)
if (uri==sip.mycompany.com) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest
authentication
#
if (!www_authorize("iptel.org", "subscriber"))
{
#
www_challenge("iptel.org",
"0");
#
break;
#
};
save("location");
break;
};
# attempt handoff to
PSTN
if (uri=~"^sip:[0-9]*@sip.mycompany.com")
{
log(4, "Forwarding to
PSTN\n");
forward(X.X.X.X,5060);
break;
};
# native SIP destinations are handled using our USRLOC
DB
if (!lookup("location"))
{
sl_send_reply("404", "Not
Found");
break;
};
};
# forward to current uri
now
if (!t_relay())
{
sl_reply_error();
};
}
_____________________________________________________________________________
----- Original Message -----
Sent: Friday, March 14, 2003 5:43
PM
Subject: Re: [Serusers] SER log
Hi Bo,
Jan just helped me with a similar
problem.
Debug level = 9 and fork t= no.
Tail /var/log messages and you will get plenty of
info.
Emil
----- Original Message -----
Sent: Saturday, March 15, 2003 12:35
AM
Subject: [Serusers] SER log
Hi,
Does anyone have any clue on the following
problem?
I recompiled and installed SER in Redhat Linux
8.0. Unfortunately I tried all the possible options (debug level) in the
ser.cfg, but the only messages I could see in the /var/log/messsages are as
follows.
Mar 14 17:56:49 dda ser[15303]: INFO: udp_init:
SO_RCVBUF is initially 65535
Mar 14 17:56:49 dda ser[15303]: INFO:
udp_init: SO_RCVBUF is finally 262142
Mar 14 17:56:49 dda ser[15303]:
INFO: udp_init: SO_RCVBUF is initially 65535
Mar 14 17:56:49 dda
ser[15303]: INFO: udp_init: SO_RCVBUF is finally 262142
Mar 14 17:56:49
dda ser[15303]: INFO: udp_init: SO_RCVBUF is initially 65535
Mar 14
17:56:49 dda ser[15303]: INFO: udp_init: SO_RCVBUF is finally 262142
Mar
14 17:56:49 dda ser[15316]: INFO: fifo process starting: 15316
Mar 14
17:56:49 dda ser[15316]: SER: open_uac_fifo: fifo server up at
/tmp/ser_fifo...
What should I do to see the detailed
debugs?
Thanks,
Bo