Hello Daniel,

 

The 486 is send by « myself” in the branch failure code.

 

        ##########################################################   486 busy

        if (t_check_status("486") && $sht(branch=>$ci) != "" ) {

        xlog("L_NOTICE", "############################################ Error received from the Carrier ----> Error $var(errorcode)");

        sl_send_reply("486","Busy Here");

        exit;

        }

 

If I remove that, no “486” is send or put in acc.

 

 

So to be clear :

 

 

Normally I don’ t have to code to send a “486” on the branch.

 

 

De : Daniel-Constantin Mierla [mailto:miconda@gmail.com]
Envoyé : mercredi 12 juillet 2017 09:23
À : Nicolas Breuer <Nicolas.Breuer@belcenter.biz>; Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>
Objet : Re: [SR-Users] TR: Failure Mode

 

Hello,

your latest sip trace shows that 486 is sent out to caller (the acc record from syslog shows that the transaction was completed with that code as well). An ACK follows, but then I see also 408.

Can you check you config and see if there is some other place that can generate the reply, like a send_reply(...) or t_reply(...)?

Cheers,
Daniel

 

On 10.07.17 12:02, Daniel-Constantin Mierla wrote:

Hello,

the new trace shows a serial forking, with the first branch timing out, but the second branch is getting a 183 response, and that's all. It is not the same scenario you described. I need the full trace, from initial invite to the final response sent back to caller to see what is the winning response code.

Cheers,
Daniel

 

On 10.07.17 10:10, Nicolas Breuer wrote:

Hello,

 

Yes I’m sure the second branch is launched from Branch Failure Route.

If you check the timer trace, you can see the second is send 4 seconds later than the first ( I set the tm_inv to 4 seconds )

 

But in the trace I sent you the “last” invite. The kamailio sent 4 invites.

 

I will send you the complete trace

 

 

 

 

De : Daniel-Constantin Mierla [mailto:miconda@gmail.com]
Envoyé : lundi 10 juillet 2017 09:20
À : Nicolas Breuer <Nicolas.Breuer@belcenter.biz>; Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>
Objet : Re: [SR-Users] TR: Failure Mode

 

Hello,

looking at the trace, the routing is parallel forking, because the two branches are sent out at the same time, it is no final response to the first branch before the second is sent out.

Are you sure you sent out the second branch from failure route? From the sip trace is doesn't seem so.

Cheers,
Daniel

 

On 07.07.17 15:38, Nicolas Breuer wrote:

Hello Daniel,

 

Thanks !

 

I sent all the information’s to your email address

 

 

De : Daniel-Constantin Mierla [mailto:miconda@gmail.com]
Envoyé : vendredi 7 juillet 2017 13:21
À : Nicolas Breuer
<Nicolas.Breuer@belcenter.biz>; Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>
Objet : Re: [SR-Users] TR: Failure Mode

 

Can you get a ngrep trace captured on kamailio server for such situation?

Also, can you paste the failure_route block here along with the log messages from the syslog?

Cheers,
Daniel

 

On 07.07.17 12:42, Nicolas Breuer wrote:

I think serial because the new branch is only created in case the first is timeout.

 

De : Daniel-Constantin Mierla [mailto:miconda@gmail.com]
Envoyé : vendredi 7 juillet 2017 12:40
À : Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org>; Nicolas Breuer <Nicolas.Breuer@belcenter.biz>
Objet : Re: [SR-Users] TR: Failure Mode

 

Hello,

are you doing parallel forking or serial forking?

Cheers,
Daniel

 

On 07.07.17 12:24, Nicolas Breuer wrote:

 

 

Hello,

 

Some help here is needed

 

# auto-discard branches from previous serial forking leg

modparam("tm", "failure_reply_mode", 3)

 

I test a call with two branches.

 

1st branch received a 408 timeout error

2nd branch received a 486 busy.

 

Normally the failure route should be with the 486.

 

NOTICE: <script>: Failure route -----2---1--408----

 

We can see the 408 is the winning reply but I understood from the documentation that if

Failure reply mode is “3” , the winning reply is always the reply from the last branch J

 

It’s a problem because if  the 1st is timeout (because down), the second is OK but callee is busy ; we don’t send the right reply to the caller

 

 

 

 







_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users






-- 
Daniel-Constantin Mierla
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio Advanced Training - www.asipto.com
Kamailio World Conference - www.kamailioworld.com





-- 
Daniel-Constantin Mierla
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio Advanced Training - www.asipto.com
Kamailio World Conference - www.kamailioworld.com




-- 
Daniel-Constantin Mierla
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio Advanced Training - www.asipto.com
Kamailio World Conference - www.kamailioworld.com



-- 
Daniel-Constantin Mierla
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio Advanced Training - www.asipto.com
Kamailio World Conference - www.kamailioworld.com



-- 
Daniel-Constantin Mierla
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio Advanced Training - www.asipto.com
Kamailio World Conference - www.kamailioworld.com