Hello,
On 10/10/12 7:23 PM, Peter Dunkley
wrote:
You need to load the cfgutils module to use pv_printf().
it is actually the kex module -- a good place to find needed module
for specific functions is the alphabetic index, in this case:
http://www.kamailio.org/wiki/alphaindexes/3.3.x/modfunctions#p
Cheers,
Daniel
Regards,
Peter
On Wed, 2012-10-10 at 13:15 -0400, Ed Brady wrote:
I modified the original config to include
the event block and added the necessary module loads, but it
still will not start properly. It displays all the connection
info like it has started but then says "kamailio error, failed
to start." When I look at the syslog I see the following errors:
ct 10 13:05:49 msg1 /usr/sbin/kamailio[19896]:
ERROR: <core> [route.c:1216]: fixing failed (code=-1) at
cfg:/etc/kamailio/kamailio.cfg:952
Oct 10 13:05:49 msg1 /usr/sbin/kamailio[19896]: ERROR:
<core> [route.c:1216]: fixing failed (code=-1) at
cfg:/etc/kamailio/kamailio.cfg:962
The lines in the config it is referring to are:
pv_printf("$var(sessid)", "s.$(pp).$(var(cnt)).$(RANDOM)");
and
if($msrp(method)=="SEND")
respectively. Any advice is appreciated. I am new to Kamailio
and MSRP, but not SIP.
Thanks,
Ed
On Wed, Oct 10, 2012 at 1:03 PM, Peter
Dunkley <peter.dunkley@crocodile-rcs.com>
wrote:
I also noticed a typo in the example.
The modparam for htable creates a hash table called "c", but
the event-route[] uses a hash table called "msrp".
This is now fixed in git master.
Regards,
Peter
On Wed, 2012-10-10 at 17:58 +0100, Peter Dunkley wrote:
Hi,
You need to load the htable module to use $sht().
This is one of the modules shown at the top of the example.
Regards,
Peter
On Wed, 2012-10-10 at 12:53 -0400, Ed Brady wrote:
After adding the event block from
the MSRP module example config, I get the following error:
Not starting Kamailio: invalid configuration
file!
-e
0(19786) INFO: tls [tls_init.c:377]: tls: init_tls:
disabling compression...
0(19786) ERROR: <core> [pvapi.c:708]: error
searching pvar "sht"
0(19786) ERROR: <core> [pvapi.c:912]: wrong char
[m/109] in [$sht(msrp=>$var(sessid)::srcaddr)] at [5
(5)]
0(19786) : <core> [cfg.y:3591]: parse error in
config file /etc/kamailio/kamailio.cfg, line 952, column
3-35: unknown script pseudo variable
$sht(msrp=>$var(sessid)::srcaddr)
ERROR: bad config file (1 errors)
Any thoughts on why it would have trouble locating the sht
var?
Thanks,
Ed
On Wed, Oct 10, 2012 at 12:40 PM, Ed Brady <ebrady@talkforgood.com>
wrote:
When I used the provided config example from
the module page, I get all sorts of errors from the
config file when trying to start Kamailio. I am going to
attempt to just copy the event route block into my
working config and see what happens. Below are the
errors it spits out when trying to start with the
example config:
Not starting Kamailio: invalid
configuration file!
-e
0(19714) ERROR: <core> [sr_module.c:560]:
ERROR: load_module: could not find module <sl>
in <modules_k/:modules/>
0(19714) : <core> [cfg.y:3591]: parse error in
config file /etc/kamailio/kamailio.cfg, line 20,
column 12-18: failed to load module
0(19714) ERROR: <core> [sr_module.c:560]:
ERROR: load_module: could not find module <kex>
in <modules_k/:modules/>
0(19714) : <core> [cfg.y:3591]: parse error in
config file /etc/kamailio/kamailio.cfg, line 21,
column 12-19: failed to load module
0(19714) ERROR: <core> [sr_module.c:560]:
ERROR: load_module: could not find module
<mi_fifo> in <modules_k/:modules/>
0(19714) : <core> [cfg.y:3591]: parse error in
config file /etc/kamailio/kamailio.cfg, line 22,
column 12-23: failed to load module
0(19714) ERROR: <core> [sr_module.c:560]:
ERROR: load_module: could not find module <ctl>
in <modules_k/:modules/>
0(19714) : <core> [cfg.y:3591]: parse error in
config file /etc/kamailio/kamailio.cfg, line 23,
column 12-19: failed to load module
0(19714) ERROR: <core> [sr_module.c:560]:
ERROR: load_module: could not find module <msrp>
in <modules_k/:modules/>
0(19714) : <core> [cfg.y:3591]: parse error in
config file /etc/kamailio/kamailio.cfg, line 24,
column 12-20: failed to load module
0(19714) ERROR: <core> [sr_module.c:560]:
ERROR: load_module: could not find module <pv>
in <modules_k/:modules/>
0(19714) : <core> [cfg.y:3591]: parse error in
config file /etc/kamailio/kamailio.cfg, line 25,
column 12-18: failed to load module
0(19714) ERROR: <core> [sr_module.c:560]:
ERROR: load_module: could not find module <auth>
in <modules_k/:modules/>
0(19714) : <core> [cfg.y:3591]: parse error in
config file /etc/kamailio/kamailio.cfg, line 26,
column 12-20: failed to load module
0(19714) ERROR: <core> [sr_module.c:560]:
ERROR: load_module: could not find module
<cfgutils> in <modules_k/:modules/>
0(19714) : <core> [cfg.y:3591]: parse error in
config file /etc/kamailio/kamailio.cfg, line 27,
column 12-24: failed to load module
0(19714) ERROR: <core> [sr_module.c:560]:
ERROR: load_module: could not find module
<htable> in <modules_k/:modules/>
0(19714) : <core> [cfg.y:3591]: parse error in
config file /etc/kamailio/kamailio.cfg, line 28,
column 12-22: failed to load module
0(19714) ERROR: <core> [sr_module.c:560]:
ERROR: load_module: could not find module <xlog>
in <modules_k/:modules/>
0(19714) : <core> [cfg.y:3591]: parse error in
config file /etc/kamailio/kamailio.cfg, line 29,
column 12-20: failed to load module
0(19714) ERROR: <core> [modparam.c:162]:
set_mod_param_regex: No module matching
<mi_fifo> found
0(19714) : <core> [cfg.y:3594]: parse error in
config file /etc/kamailio/kamailio.cfg, line 32,
column 54: Can't set module parameter
0(19714) ERROR: <core> [modparam.c:162]:
set_mod_param_regex: No module matching <htable>
found
0(19714) : <core> [cfg.y:3594]: parse error in
config file /etc/kamailio/kamailio.cfg, line 34,
column 58: Can't set module parameter
0(19714) ERROR: <core> [cfg.y:3455]: cfg.
parser: failed to find command sl_send_reply
0(19714) : <core> [cfg.y:3594]: parse error in
config file /etc/kamailio/kamailio.cfg, line 37,
column 36: unknown command, missing loadmodule?
0(19714) ERROR: <core> [cfg.y:3455]: cfg.
parser: failed to find command xdbg
0(19714) : <core> [cfg.y:3594]: parse error in
config file /etc/kamailio/kamailio.cfg, line 46,
column 52: unknown command, missing loadmodule?
0(19714) ERROR: <core> [cfg.y:3455]: cfg.
parser: failed to find command xdbg
0(19714) : <core> [cfg.y:3594]: parse error in
config file /etc/kamailio/kamailio.cfg, line 47,
column 35: unknown command, missing loadmodule?
0(19714) ERROR: <core> [cfg.y:3455]: cfg.
parser: failed to find command xdbg
0(19714) : <core> [cfg.y:3594]: parse error in
config file /etc/kamailio/kamailio.cfg, line 48,
column 49: unknown command, missing loadmodule?
0(19714) ERROR: <core> [cfg.y:3455]: cfg.
parser: failed to find command xdbg
0(19714) : <core> [cfg.y:3594]: parse error in
config file /etc/kamailio/kamailio.cfg, line 49,
column 50: unknown command, missing loadmodule?
0(19714) ERROR: <core> [cfg.y:3455]: cfg.
parser: failed to find command xdbg
0(19714) : <core> [cfg.y:3594]: parse error in
config file /etc/kamailio/kamailio.cfg, line 50,
column 50: unknown command, missing loadmodule?
0(19714) ERROR: <core> [cfg.y:3455]: cfg.
parser: failed to find command xdbg
0(19714) : <core> [cfg.y:3594]: parse error in
config file /etc/kamailio/kamailio.cfg, line 51,
column 51: unknown command, missing loadmodule?
0(19714) ERROR: <core> [cfg.y:3455]: cfg.
parser: failed to find command xdbg
0(19714) : <core> [cfg.y:3594]: parse error in
config file /etc/kamailio/kamailio.cfg, line 52,
column 50: unknown command, missing loadmodule?
0(19714) ERROR: <core> [cfg.y:3455]: cfg.
parser: failed to find command xdbg
0(19714) : <core> [cfg.y:3594]: parse error in
config file /etc/kamailio/kamailio.cfg, line 53,
column 51: unknown command, missing loadmodule?
0(19714) ERROR: <core> [cfg.y:3455]: cfg.
parser: failed to find command xdbg
0(19714) : <core> [cfg.y:3594]: parse error in
config file /etc/kamailio/kamailio.cfg, line 54,
column 51: unknown command, missing loadmodule?
0(19714) ERROR: <core> [cfg.y:3455]: cfg.
parser: failed to find command xdbg
0(19714) : <core> [cfg.y:3594]: parse error in
config file /etc/kamailio/kamailio.cfg, line 55,
column 50: unknown command, missing loadmodule?
0(19714) ERROR: <core> [cfg.y:3455]: cfg.
parser: failed to find command xdbg
0(19714) : <core> [cfg.y:3594]: parse error in
config file /etc/kamailio/kamailio.cfg, line 56,
column 50: unknown command, missing loadmodule?
0(19714) ERROR: <core> [cfg.y:3455]: cfg.
parser: failed to find command xdbg
0(19714) : <core> [cfg.y:3594]: parse error in
config file /etc/kamailio/kamailio.cfg, line 57,
column 49: unknown command, missing loadmodule?
0(19714) ERROR: <core> [cfg.y:3455]: cfg.
parser: failed to find command msrp_reply_flags
0(19714) : <core> [cfg.y:3594]: parse error in
config file /etc/kamailio/kamailio.cfg, line 59,
column 22: unknown command, missing loadmodule?
0(19714) ERROR: <core> [cfg.y:3455]: cfg.
parser: failed to find command msrp_is_reply
0(19714) : <core> [cfg.y:3594]: parse error in
config file /etc/kamailio/kamailio.cfg, line 61,
column 22: unknown command, missing loadmodule?
0(19714) ERROR: <core> [cfg.y:3455]: cfg.
parser: failed to find command msrp_relay
0(19714) : <core> [cfg.y:3594]: parse error in
config file /etc/kamailio/kamailio.cfg, line 63,
column 20: unknown command, missing loadmodule?
0(19714) ERROR: <core> [pvapi.c:708]: error
searching pvar "msrp"
0(19714) ERROR: <core> [pvapi.c:912]: wrong
char [m/109] in [$msrp(method)] at [6 (5)]
0(19714) : <core> [cfg.y:3591]: parse error in
config file /etc/kamailio/kamailio.cfg, line 68,
column 5-17: unknown script pseudo variable
$msrp(method)
ERROR: bad config file (29 errors)
Thanks,
Ed
On Mon, Oct 8, 2012 at 6:14 PM, Daniel-Constantin Mierla
<miconda@gmail.com>
wrote:
Hello,
On 10/8/12 5:26 PM, Ed Brady wrote:
Hi,
I am working on an MSRP project with Kamailio. I
have Kamailio installed and configured for SIP with
several test accounts created, but am unable to send
MSRP messages so far. I am using Blink as a test
client, though the final intentions of the project
will be to use iDoubs and IMSDroid for client
connections. We are having these developed to our
needs right now though, so I must use another client
to begin testing.
I have been unable to find good documentation on the
initial configuration of MSRP in Kamailio. I have
seen the module documentation, but am unclear how to
utilize the information there to configure Kamailio
properly. Is there any documentation on getting
started with a basic MSRP relay setup so that two
clients can chat and send files? I am not new to
SIP, but this is my first project with MSRP.
at the time I developed the module were no good
clients supporting msrp, so I did testing mainly with
forged network tools. But I am happy to assist as much
as possible provided my availability and fix eventual
issues.
The readme of the module provides and example for a
stand alone msrp relay. If you want to put it inside a
more complex kamailio configuration that handles sip
as well, then be sure you load msrp module as well as
all the other modules from the readme's config and set
the module parameters.
Then copy the event_route[msrp:frame-in] block in your
config. MSRP packets have to be sent to port 5060 (or
5061 for tls), or you can configure kamailio to listen
on an additional port where you send the msrp packets.
If something is not working, send the log messages
(debug=3 in your config) and the ngrep trace if you
use plain tcp.
Cheers,
Daniel
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Peter Dunkley
Technical Director
Crocodile RCS Ltd
|
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users
mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Peter Dunkley
Technical Director
Crocodile RCS Ltd
|
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat
Kamailio Advanced Training, Miami, USA, Nov 12-14, 2012 - http://asipto.com/u/katu