Hi JR,
On 6/28/10 11:39 PM, JR Richardson wrote:
Hi All,
I'm testing dispatcher functions with kamailio 3.0 and using database
to load destination address. The problem I am seeing is the 1'st
destination address in a group is not being used, the dispatcher
always starts at the second database entry. For instance, if I have 2
destination addresses listed in the database, sip:10.10.14.101:5060
and sip:10.10.14.102:5060, only sip:10.10.14.102:5060 will receive
calls. But if I list .101 in the database twice, then I will get
proper distribution.
looks like a feature :-) ... Can you print the list of avp holding the
destination addresses after you call ds_select_dst()? you can do it
with the avp_print() from avpops module or with a 'while' iterating
through the avps.
Say you have:
modparam("dispatcher", "dst_avp", "$avp(dst)")
$var(i) = 0;
while($(avp(dst)[$var(i)])) {
xlog(" --- $(avp(dst)[$var(i)]) \n");
$var(i) = $var(i) + 1;
}
Pasting here the parameters you set for dispatcher module would be
helpful as well.
Cheers,
Daniel
So here is my setup and some debug traffic:
sipp><sr-router><dispatcher round robin group 1><10.10.14.101,
10.10.14.102, 10.10.14.101
This will send calls to both .101 and 102 evenly.
sip-router2:~# kamctl fifo ds_list
SET:: 1
URI:: sip:10.10.14.101:5060 flag=A
URI:: sip:10.10.14.102:5060 flag=A
URI:: sip:10.10.14.101:5060 flag=A
first call to dispatcher:
0(4780) DEBUG: dispatcher [dispatch.c:1111]: set [1]
0(4780) DEBUG: dispatcher [dispatch.c:1185]: alg hash [0]
0(4780) DEBUG: dispatcher [dispatch.c:1223]: selected [4-1/0]
<sip:10.10.14.101:5060>
0(4780) DEBUG: dispatcher [dispatch.c:1257]: using entry [1/1]
0(4780) INFO: <script>: ds_dispatcher sip:10.10.14.101:5060 1 3
second call to dispatcher:
0(4780) DEBUG: dispatcher [dispatch.c:1111]: set [1]
0(4780) DEBUG: dispatcher [dispatch.c:1185]: alg hash [1]
0(4780) DEBUG: dispatcher [dispatch.c:1223]: selected [4-1/1]
<sip:10.10.14.102:5060>
0(4780) DEBUG: dispatcher [dispatch.c:1245]: using entry [1/0]
0(4780) INFO: <script>: ds_dispatcher sip:10.10.14.102:5060 1 3
third call to dispatcher goes back to .101, then .102, ect.
sipp><sr-router><dispatcher round robin group 2><10.10.14.103 and 10.10.14.104
This will send calls only to .104
sip-router2:~# kamctl fifo ds_list
SET_NO:: 2
SET:: 2
URI:: sip:10.10.14.104:5060 flag=A
URI:: sip:10.10.14.103:5060 flag=A
first call to dispatcher:
0(4780) DEBUG: dispatcher [dispatch.c:1111]: set [2]
0(4780) DEBUG: dispatcher [dispatch.c:1185]: alg hash [0]
0(4780) DEBUG: dispatcher [dispatch.c:1223]: selected [4-2/0]
<sip:10.10.14.104:5060>
0(4780) INFO: <script>: ds_dispatcher sip:10.10.14.104:5060 2 2
second call to dispatcher:
0(4780) DEBUG: dispatcher [dispatch.c:1111]: set [2]
0(4780) DEBUG: dispatcher [dispatch.c:1185]: alg hash [1]
0(4780) DEBUG: dispatcher [dispatch.c:1223]: selected [4-2/0]
<sip:10.10.14.104:5060>
0(4780) INFO: <script>: ds_dispatcher sip:10.10.14.104:5060 2 2
So it appears with only 2 entries loaded in the database, there is a
missing "DEBUG: dispatcher [dispatch.c:1245]: using entry [1/0]" This
is the only difference I can see between the call executions between
the two groups. But I don't really know what that means.
I can reproduce these symptoms on kamailio 3.0, 1.5.x and older
versions. The same thing happens when the destinations are loaded via
config file dispatcher.lst.
I am using debian Lenny with siremis web interface.
mysql> select * from dispatcher\G;
*************************** 1. row ***************************
id: 1
setid: 1
destination: sip:10.10.14.101:5060
flags: 0
priority: 0
description: lab1
*************************** 2. row ***************************
id: 2
setid: 1
destination: sip:10.10.14.102:5060
flags: 0
priority: 0
description: lab2
*************************** 3. row ***************************
id: 3
setid: 2
destination: sip:10.10.14.103:5060
flags: 0
priority: 0
description: lab3
*************************** 4. row ***************************
id: 4
setid: 2
destination: sip:10.10.14.104:5060
flags: 0
priority: 0
description: lab4
*************************** 5. row ***************************
id: 5
setid: 1
destination: sip:10.10.14.101:5060
flags: 0
priority: 0
description: lab1
5 rows in set (0.00 sec)
Is this a bug?
Thanks.
JR
--
Daniel-Constantin Mierla
http://www.asipto.com/