Hi Timmo,

We do have enable_double_rr set to 1 but the route set added by the proxy when record_route() on the INVITE consists in a single route. This is because Alice and Bob are BOTH registered with the alternate port 5066 on the same interfacec and using the same protocol (UDP). To us, this seems logical.

Do you have a double route in your case even though both party are on the same port, same interface and both UDP? If so, could you send us an exemple of Route: header?

Emmanuel BUU
IVèS

Le 2018-02-02 à 14:18, Timmo Verlaan a écrit :
Hi Thomas,

We have a similar situation but we use double route headers so the correct egress socket is chosen. You can enable this by setting a modparam: enable_double_rr.
Would this be a solution for you?

Kind regards,
Timmo Verlaan

On 2 Feb 2018 13:57, "Thomas Carvello" <thomas.carvello@ives.fr> wrote:

Thank you for you answer.

We have tried to change the local port for Bob, but it doesnt change anything. And the contact value in 200 OK message has no influence in this case.

In fact, we have made a further investigation regarding the socket selection and read the code. The issue seems to be located in the RR module and the loose_route() function.

In the  after_loose() function in loose.c, the  function set_force_socket()  is called only if a DOUBLE route is mentioned in the route set of the ACK message

But when both users are using 5066 as proxy port, we get only ONE route for the proxy in the route set (and to us it is OK). In this case, we get a trace:

"No next URI found"

and the code exits. Later in the message processing, when t_relay() is called, the forward_request() selects the first socket defined in our configuration instead.

At this point, we can't presume what socket we be select. We believe that it is a software bug  and that after_loose() should force the send_socket even though we have only one route in the route set. We also checked the 5.1 code and there is no change in this module that would alter this behavior.

Are we missing something?

Thank you for you time,

Thomas

Le 26/01/2018 à 15:43, Евгений Голей a écrit :
Hi

Could it be because of Bob happend to use 5060 as local port?

Yes, the port and the address in the ACK are indicated by what the value in Contact was in reply 200 Ok. Look at the message 200 Ok



Четверг, 25 января 2018, 13:00 +03:00 от Thomas Carvello <thomas.carvello@ives.fr>:


Hello,

i have an issue with my Kamailio 4.1.9 configuration.

This configuration is multi-homed, we have two network interfaces, one on a private network and on the public Internet. Kamailio is configured to listen on port 5060 and 5066 on both interfaces. We register two users Alice and Bob on the  public Internet using port 5066.  Both users are behind a NAT and we capture the SIP exchange on the proxy server.

We have set the parameter mhomed=1

When Alice calls Bob, we have

Alice			Proxy				Bob
src=5063		dst=5066
INVITE ------------------>

                        src=5066
                        ------  INVITE ---------------> dst=5060

                        dst=5066  
                        <------- 200 OK -------------- src=5060


dst=5063 
<------- 200 OK --------- src=5066

src=5063		dst=5066
-------- ACK ----------->

                        src=5060      (blocked by NAT)
                        ------  ACK-----x            dst=5060


The ACK packet gets relayed with the wrong source port. Then the NAT rejects the packet and the call cannot be established.

For some reason, when Bob calls Alice, the call is correctly established. Could it be because Bob happend to use 5060 as local port?

Also, if we set nhomed=0 it works BUT we are not sure that multi homed is handled correctly.

I was wondering if you have encounter this issue before?

I have investigated the code for selection socket and what is the logic of this selection ?

How does kamailo knows that it should choose 5066 as src port if the user is registered using port 5066 instead of 5066?

Thank you for your time.

Thomas



_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users


Best
Evgeniy


_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users



_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users