Hello,

 

how much are you actually logging? As already suggested, maybe just need to decrease the amount of log messages.

 

If you need this much logging, you can of course forward it to a dedicated log server over the network.

 

Cheers,

 

Henning

 

--

Henning Westerholt – https://skalatan.de/blog/

Kamailio services – https://gilawa.com

 

From: Amit <amit@brytecall.com>
Sent: Thursday, September 15, 2022 1:33 PM
To: Henning Westerholt <hw@gilawa.com>
Cc: Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] Log levels severely impacts performance

 

Hi Henning,

Thanks for the suggestion. 

Disk I/O was our initial assumption on another Kamilio instance we are running. 

To test this theory we installed Kamailio on separate hardware and configurations with faster underlying SSD disks, however we are seeing the same crippled performance and congestion in the applications socket receive buffer when LOG level is set to INFO (2).

 

____________________

Amit Nir, MBA

Office: 305.999.0911

www.BryteCall.com



On Sep 15, 2022, at 6:14 AM, Henning Westerholt <hw@gilawa.com> wrote:



Hello,

 

additionally, try to see if you have some general I/O issues, e.g., by observing io-wait CPU, looking to I/O transaction times with monitoring tools etc..

Maybe there are other services also causing excessive I/O.

 

Cheers,

 

Henning

 

--

Henning Westerholt – https://skalatan.de/blog/

Kamailio services – https://gilawa.com

 

From: sr-users <sr-users-bounces@lists.kamailio.org> On Behalf Of Daniel-Constantin Mierla
Sent: Wednesday, September 14, 2022 2:25 PM
To: Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>; Amit <amit@brytecall.com>
Subject: Re: [SR-Users] Log levels severely impacts performance

 

Hello,

excessive logging is known to impact the performances. If you have many log messages printed from config, try to reduce them.

Performance could be also a matter of how many child processes you created, via the children global parameter.

Cheers,
Daniel

On 14.09.22 04:18, Amit wrote:

Hello,

 

We’ve been running Kamailio 5.5.0 for a while now and recently ran into an issue where the application buffer would get full and Kamailio has a lot of difficulty keeping up with REG requests. This severely impacted Kamailio’s ability to perform and resulted in many REG timeouts.

 

Running ‘watch netstat -ulpn’ revealed the buffer issue.

 

We usually run the production system at log level INFO (2) and had not ran into any issues in the past.

 

When the buffer issue occurred and after some testing, we discovered that changing the log level to NOTICE (1) was sufficient to bring the system back into operational status.

 

For example, at log level INFO (2) we seem to achieve ~150-200 REG/s while at log level NOTICE (1) we reach ~500-700 REG/s.

 

I did find this article in the wiki and tried using the “-“ in front of the log path but this didn’t seem to help.

http://www.kamailio.org/wiki/tutorials/3.2.x/syslog

 

Even writing the logs directly to our external log server and preventing them from being written to the local disk doesn’t seem to alleviate the issue when the log level is set to INFO (2).

 

Does anyone have any experience with this or have any suggestions? We are finding it difficult to scale as a result of this issue.

 

Thank you in advance.

Amit

 




__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
  * sr-users@lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
  * https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- 
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda