This should restore the message in failure route as it was before you modify it from the main route , call it before anything else that could modify the message.

t_save_lumps()


On Sat, Apr 27, 2019, 16:02 Sergiu Pojoga <pojogas@gmail.com> wrote:
Hi ppl,

After a branch route fails, I need to re-evaluate the next destination and adjust RR parameters, if need be, like for example adjust the nat=yes|priv.

failure_route[MANAGE_PSTN_FAILURE] {
...
remove_record_route();
record_route();
route(NATMANAGE);
...
route(RELAY);
}

The result is that the new branch is stripped of "Record-Route: <sip:MYIP>", but the params remained. Moreover, record_route hasn't been re-added as instructed in the failure route.

Request headers of the initial branch that will eventually timeout and fail:

2019/04/27 18:29:18.034992 10.22.0.1:5060 -> 10.22.0.100:5060                                                                                                                                                                                                                 
INVITE sip:1514XXXXXXX@10.22.0.100 SIP/2.0                                                                                                                                                                                                                                      
Record-Route: <sip:10.22.0.1;r2=on;lr=on;did=9e2.3dd2;nat=priv>
Record-Route: <sip:65.XX.XX.1;r2=on;lr=on;did=9e2.3dd2;nat=priv>

New request branch after failure:

2019/04/27 18:29:19.538292 65.XX.XXX.1:5060 -> 65.XX.XX.2:5060
INVITE sip:1514XXXXXXX@65.XX.XX.2 SIP/2.0
;lr=on;did=9e2.3dd2;nat=priv>


kamailio -v
version: kamailio 5.1.6 (x86_64/linux) 7d1964

Much obliged.
--Sergiu

_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users