Hi,

I removed x parameter and re-run. But, I still got same error:

mediaproxy-ng[10607]: Got valid command from 127.0.0.1:54098: answer - { "sdp": "v=0#015#012o=- 3583815381 3583815382 IN IP4 10.10.10.20#015#012s=pjmedia#015#012c=IN IP4 10.10.10.20#015#012t=0 0#015#012m=audio 4021 RTP/AVP 0 101#015#012c=IN IP4 10.10.10.20#015#012a=rtcp:4012 IN IP4 10.10.10.20#015#012a=sendrecv#015#012a=rtpmap:0 PCMU/8000#015#012a=rtpmap:101 telephone-event/8000#015#012a=fmtp:101 0-15#015#012a=ice-ufrag:498bc970#015#012a=ice-pwd:5f0321c0#015#012a=candidate:Ha0a0a14 1 UDP 2130706431 10.10.10.20 4021 typ host#015#012a=candidate:Ha0a0a14 2 UDP 2130706430 10.10.10.20 4012 typ host#015#012m=text 0 RTP/AVP 124 123#015#012", "flags": [ "force" ], "replace": [ "origin" ], "call-id": "e2065031-89db-1460-0b8a-4670998bcb97", "received-from": [ "IP4", "x.x.x.x" ], "from-tag": "17831887", "to-tag": "Z-9BdndAjW4RvnSpPKLNt02ksKPJf1Fd", "command": "answer" }

mediaproxy-ng[10607]: [e2065031-89db-1460-0b8a-4670998bcb97 - ] Got LOOKUP, but no usable callstreams found

mediaproxy-ng[10607]: Error rewriting SDP

 mediaproxy-ng[10607]: Protocol error in packet from 127.0.0.1:54098: Error rewriting SDP [d3:sdp457:v=0#015#012o=- 3583815381 3583815382 IN IP4 10.10.10.20#015#012s=pjmedia#015#012c=IN IP4 10.10.10.20#015#012t=0 0#015#012m=audio 4021 RTP/AVP 0 101#015#012c=IN IP4 10.10.10.20#015#012a=rtcp:4012 IN IP4 10.10.10.20#015#012a=sendrecv#015#012a=rtpmap:0 PCMU/8000#015#012a=rtpmap:101 telephone-event/8000#015#012a=fmtp:101 0-15#015#012a=ice-ufrag:498bc970#015#012a=ice-pwd:5f0321c0#015#012a=candidate:Ha0a0a14 1 UDP 2130706431 10.10.10.20 4021 typ host#015#012a=candidate:Ha0a0a14 2 UDP 2130706430 10.10.10.20 4012 typ host#015#012m=text 0 RTP/AVP 124 123#015#0125:flagsl5:forcee7:replacel6:origine7:call-id36:e2065031-89db-1460-0b8a-4670998bcb9713:received-froml3:IP414:x.x.x.xe8:from-tag8:178318876:to-tag32:Z-9BdndAjW4RvnSpPKLNt02ksKPJf1Fd7:command6:answere]

mediaproxy-ng[10607]: Returning to SIP proxy: d6:result5:error12:error-reason19:Error rewriting SDPe

And rtpproxy-ng segment fault when I hangup call.


2013/7/26 Carsten Bock <carsten@ng-voice.com>
Hi,

the "x"-Parameter in dlg_manage is for bridging IPv4/IPv6. You only
have configured one address, so the x-Parameter does not make any
sense here.
http://kamailio.org/docs/modules/devel/modules/rtpproxy.html#idp2994536

Kind regards from the implementor of the "x"-Parameter,
Carsten

2013/7/26 Khue Nguyen Minh <khuenm@vega.com.vn>:
> I run mediaproxy-ng with command:
> mediaproxy-ng --table=42 --ip=x.x.x.x --listen-ng=127.0.0.1:7723 --tos=184
> --pidfile=/var/run/mediaproxy-ng.pid --advertised-ip=x.x.x.x
>
> And this is my config of sipproxy
> 1. when I receive INVITE message
> if (is_request()) {
>                         if (is_direction("downstream"))
>                                 rtpproxy_manage("fox");
>                         else
>                                 rtpproxy_manage("foxr");
>                 } else {
>                         if (is_direction("downstream"))
>                                 rtpproxy_manage("foxr");
>                         else
>                                 rtpproxy_manage("fox");
>                 }
>
> 2. When I receive 200 OK response
> if (is_request()) {
>                         if (is_direction("downstream"))
>                                 rtpproxy_manage("foxr");
>                         else
>                                 rtpproxy_manage("fox");
>                 } else {
>                         if (is_direction("downstream"))
>                                 rtpproxy_manage("fox");
>                         else
>                                 rtpproxy_manage("foxr");
>                 }
>
>
> 2013/7/26 Alexey Rybalko <alexey.rybalko@gmail.com>
>>
>> Hi!
>>
>> Just my two cents. What parameters do you use for mediaproxy? Smth like
>> RUN_MEDIAPROXY=yes
>> LISTEN_UDP=127.0.0.1:1111
>> LISTEN_NG=127.0.0.1:11123
>> ADDRESS=XXX.XXX.XXX.XXX
>>
>> ?
>>
>> regards,
>> Alexey
>>
>>
>>
>> 2013/7/26 Khue Nguyen Minh <khuenm@vega.com.vn>
>>>
>>> Thanks Richard. Now, rtpproxy-ng can work with mediaproxy-ng. But, I have
>>> some error when run it. After rtpproxy-ng send SDP information to
>>> mediaproxy-ng, it receive wrong IP. please see follow log:
>>>
>>> Got valid command from 127.0.0.1:60340: offer - { "sdp":
>>> "v=0#015#012o=doubango 1983 678901 IN IP4 10.0.0.19#015#012s=-#015#012c=IN
>>> IP4 10.0.0.19#015#012t=0 0#015#012a=tcap:1 RTP/AVPF#015#012m=audio 18876
>>> RTP/AVP 0 8 101#015#012a=ptime:20#015#012a=silenceSupp:off - - -
>>> -#015#012a=rtpmap:0 PCMU/8000/1#015#012a=rtpmap:8
>>> PCMA/8000/1#015#012a=rtpmap:101 telephone-event/8000/1#015#012a=fmtp:101
>>> 0-16#015#012a=pcfg:1
>>> t=1#015#012a=sendrecv#015#012a=rtcp-mux#015#012a=ssrc:434299437
>>> cname:ldjWoB60jbyQlR6e#015#012a=ssrc:434299437
>>> mslabel:6994f7d1-6ce9-4fbd-acfd-84e5131ca2e2#015#012a=ssrc:434299437
>>> label:Doubango#015#012m=text 2306 RTP/AVP 124 123#015#012a=rtpmap:124
>>> t140/1000#015#012a=fmtp:124 cps=30#015#012a=rtpmap:123
>>> red/1000#015#012a=fmtp:123 124/124/124/124#015#012a=pcfg:1
>>> t=1#015#012a=sendrecv#015#012a=rtcp-mux#015#012", "flags": [ "force",
>>> "auto-bridge" ], "replace": [ "origin" ], "call-id":
>>> "066cf8f8-fec9-7441-32f1-211298ff1715", "received-from": [ "IP4", "x.x.x.x"
>>> ], "from-tag": "15056954", "command": "offer" }
>>>
>>> [066cf8f8-fec9-7441-32f1-211298ff1715] Creating new call
>>>
>>> Returning to SIP proxy: d3:sdp1022:v=0#015#012o=doubango 1983 678901 IN
>>> IP4 0.0.0.0#015#012s=-#015#012c=IN IP4 0.0.0.0#015#012t=0 0#015#012a=tcap:1
>>> RTP/AVPF#015#012a=ice-lite#015#012m=audio 40000 RTP/AVP 0 8
>>> 101#015#012a=ptime:20#015#012a=silenceSupp:off - - - -#015#012a=rtpmap:0
>>> PCMU/8000/1#015#012a=rtpmap:8 PCMA/8000/1#015#012a=rtpmap:101
>>> telephone-event/8000/1#015#012a=fmtp:101 0-16#015#012a=pcfg:1
>>> t=1#015#012a=sendrecv#015#012a=ssrc:434299437
>>> cname:ldjWoB60jbyQlR6e#015#012a=ssrc:434299437
>>> mslabel:6994f7d1-6ce9-4fbd-acfd-84e5131ca2e2#015#012a=ssrc:434299437
>>> label:Doubango#015#012a=rtcp:40001#015#012a=ice-ufrag:7YFi3AH6#015#012a=ice-pwd:oZwjQ1y9WJbLLI6mjWMSOOSVMvdQ#015#012a=candidate:rfWFb7Vp3QisWSvf
>>> 1 UDP 2130706432 0.0.0.0 40000 typ host#015#012a=candidate:rfWFb7Vp3QisWSvf
>>> 2 UDP 2130706431 0.0.0.0 40001 typ host#015#012m=text 40004 RTP/AVP 124
>>> 123#015#012a=rtpmap:124 t140/1000#015#012a=fmtp:124
>>> cps=30#015#012a=rtpmap:123 red/1000#015#012a=fmtp:123
>>> 124/124/124/124#015#012a=pcfg:1
>>> t=1#015#012a=sendrecv#015#012a=rtcp:40005#015#012a=ice-ufrag:4SUsQrLE#015#012a=ice-pwd:qhLmZW7KFb6W7QOVFEOraZfcQaCG#015#012a=candidate:rfWFb7Vp3QisWSvf
>>> 1 UDP 2130706432 0.0.0.0 40004 typ host#015#012a=candidate:rfWFb7Vp3QisWSvf
>>> 2 UDP 2130706431 0.0.0.0 40005 typ host#015#0126:result2:oke
>>>
>>> And in SIP message I capture from network, IP address in SDP body become
>>> 0.0.0.0. The call setup success but I don't hear anything. When I hangup
>>> this call, module rtpproxy-ng segment fault, and this is call stack:
>>>
>>> #0  bencode_string (bencbuf=0x7fffb6206760, msg=0x7fd617cb13a0,
>>> op=OP_DELETE, flags_str=0x7fd617cd5f90 "fox", body_out=0x0) at bencode.h:349
>>> #1  bencode_list_add_string (bencbuf=0x7fffb6206760, msg=0x7fd617cb13a0,
>>> op=OP_DELETE, flags_str=0x7fd617cd5f90 "fox", body_out=0x0) at bencode.h:407
>>> #2  rtpp_function_call (bencbuf=0x7fffb6206760, msg=0x7fd617cb13a0,
>>> op=OP_DELETE, flags_str=0x7fd617cd5f90 "fox", body_out=0x0) at
>>> rtpproxy.c:1191
>>>
>>> Please help me fix it.
>>>
>>> Thanks
>>> Khue.
>>>
>>>
>>> 2013/7/24 Richard Fuchs <rfuchs@sipwise.com>
>>>>
>>>> On 07/24/13 05:45, Khue Nguyen Minh wrote:
>>>> > Hi all,
>>>> >
>>>> > I am using rtpproxy-ng to control mediaproxy-ng. I was install and
>>>> > config follow this guide:
>>>> > https://github.com/sipwise/mediaproxy-ng
>>>> > when I run kamailio with rtpproxy-ng module and mediaproxy-ng I got
>>>> > error:
>>>> > mediaproxy-ng[25216]: Failed to properly parse UDP command line
>>>> > '30514_2
>>>> > d7:command4:pinge' from 127.0.0.1:54621 <http://127.0.0.1:54621>,
>>>> > using
>>>> > fallback RE
>>>> > ERROR: rtpproxy-ng [rtpproxy.c:1381]: rtpp_test(): proxy responded
>>>> > with
>>>> > invalid response
>>>>
>>>> As a quick guess, I'd say that you used the -u option instead of the -n
>>>> option (or --listen-udp instead of --listen-ng). Substitute one for the
>>>> other and it should work.
>>>>
>>>> cheers
>>>>
>>>>
>>>> _______________________________________________
>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>>> sr-users@lists.sip-router.org
>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>>
>>>
>>>
>>> _______________________________________________
>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>> sr-users@lists.sip-router.org
>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>
>>
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users@lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>



--
Carsten Bock
CEO (Geschäftsführer)

ng-voice GmbH
Schomburgstr. 80
D-22767 Hamburg / Germany

http://www.ng-voice.com
mailto:carsten@ng-voice.com

Office +49 40 34927219
Fax +49 40 34927220

Sitz der Gesellschaft: Hamburg
Registergericht: Amtsgericht Hamburg, HRB 120189
Geschäftsführer: Carsten Bock
Ust-ID: DE279344284

Hier finden Sie unsere handelsrechtlichen Pflichtangaben:
http://www.ng-voice.com/imprint/

_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users