Hello,
if your config it is based on the default one, the Route header for
within dialog requests is marked by a parameter, nat=yes, that is
used to decide whether to do rtpproxy or not.
So, if you have a custom config, check the default one for the nat
traversal handling part.
Cheers,
Daniel
On 8/30/12 12:39 AM, Spencer Thomason
wrote:
Hello,
I'm using Kamailio 3.2.4 for NAT traversal using
rtpproxy_manage() in a largely stock script. Everything works
great until the far end (on a public ip) sends a t.38
re-INVITE. The 200OK from the NATed UAC then doesn't trigger
rtpproxy and the private IP in the sdp causes the fax to fail.
Any help handling these re-INVITEs would be greatly
appreciated. I'm happy to post traces if that helps describe
the situation. The network topology looks like this:
NATed UAC -> Kamailio on a public IP -> UAS on a public
IP
Thanks in advance,
Spencer
Connected by DROID on Verizon Wireless
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla - http://www.asipto.com
http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
Kamailio Advanced Training, Berlin, Nov 5-8, 2012 - http://asipto.com/u/kat