On 30 Dec 2014, at 12:48, Joćo Vitor Arruda <joao.arruda@gmail.com> wrote:

Hi Olle,

Now.... I did. :)

Looks like the default 1KB on "binrpc_struct_max_body_size" is just good to print around 26 registered users when using "ul.dump". Increasing it allows to print more.

Thank you very much for this tip.

One final question: There is any problem or harm to set it to a higher value like 100KB (that would allow to print around 2600 registered users using "ul.dump") ?
I would rather use a database with usrloc replication :-)

Just make sure you allocate enough shared memory at Kamailio startup. Modern servers have plenty of memory,
but the default Kamailio allocation is not big.

/O

Regards,

2014-12-30 9:31 GMT-02:00 Olle E. Johansson <oej@edvina.net>:

On 30 Dec 2014, at 12:20, Joćo Vitor Arruda <joao.arruda@gmail.com> wrote:

> Hello,
>
> I“m doing a test with the ul.dump output on both Kamailio 4.1.5 or 4.2.1 and it works great if the number of registered users is 26 or lower.
>
> Starting with 27 registered users the "kamcmd ul.dump" command returns the error:
> "error: 500 - Internal error creating aor struct"
>
> In Kamailio 4.2.1 the new (and nice) "kamcmd stats.get_statistics usrloc:" returns the correct number of registered_users without this "26 limit".
>
> Its possible to check why ul.dump is failing this way?
>

Have you checked the CTL buffer sizes?

http://kamailio.org/docs/modules/4.2.x/modules/ctl.html

/O


_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users