//GafarHi WiilI will be try help youOn Sat, Jan 17, 2015 at 4:43 AM, Will Ferrer <will.ferrer@switchsoft.com> wrote:Hi AdbulThanks, I am glad the information is useful.Do you have any thoughts on what I could I try next to get that $dlg(start_ts) value populated in the dialog as it is still not working about adding the loose_route() function?I also tried looking at the logs for any reference to dialog -- tail -f /var/log/syslog | grep dialogThe only thing that came up with rtpengine talking about dialogs so no clues there.Thanks to you guys for the help.All the best.WillOn Fri, Jan 16, 2015 at 1:25 AM, Abdul Gafar <abdul.gafar.tim@gmail.com> wrote:Hi Will,
Thanks for sharing very useful information.//GafarOn Fri, Jan 16, 2015 at 12:48 PM, Will Ferrer <will.ferrer@switchsoft.com> wrote:Hi Daniel
Thanks so much for the response and help as always.
I tried changing my config to use loose route.
It looks like this now:
loadmodule "dialog.so"
...
modparam("dialog", "db_url", DBURL)
modparam("dialog", "db_mode", 1)
modparam("dialog", "dlg_flag", 4)
modparam("dialog", "dlg_match_mode", 1)
...
request_route {
if (is_method("INVITE") && (! has_totag() ) ) {
dlg_manage();
xlog ("L_INFO", "request_route DIALOG TEST: Dialog initiated");
}
if (is_method("BYE")) {
#dlg_manage();
loose_route();
$var(elapsed) = ( $TV(s) - $dlg(start_ts) );
xlog ("L_INFO", "request_route DIALOG TEST: Completed $dlg(from_uri) to $dlg(to_uri), elapsed: $var(elapsed), now seconds: $TV(s), dlg start time: $dlg(start_ts), DLG_lifetime: $DLG_lifetime");
}
....
I now get:
INFO: <script>: request_route DIALOG TEST: Dialog initiate
INFO: <script>: request_route DIALOG TEST: Completed sip:willf1976Test@develop-sbc.switchsoft.com to sip:+18054515526@develop-sbc.switchsoft.com, elapsed: 1421386898, now seconds: 1421386898, dlg start time: 0, DLG_lifetime: 1421386898
So the $DLG_lifetime is being populated, but it has all the seconds since epoch time. You can also see that the $dlg(start_ts) is 0.
I also tried using the dlg_manage() instead of the loose route in my test and got the same result.
Any idea what might be missing?
Thanks again for your help.
All the best.
Will
On Thu, Jan 15, 2015 at 5:53 AM, Daniel-Constantin Mierla <miconda@gmail.com> wrote:
>
> Hello,
>
> try to do dlg_manage() or lose_route() before accessing the dialog variables.
>
> Cheers,
> Daniel
>
>
> On 15/01/15 08:25, Will Ferrer wrote:
>
> An update on this.
>
> I tried setting my dialog module to the use the db. No db entry is ever made.
>
> My config looks like this now:
>
> loadmodule "dialog.so"
>
> ...
> modparam("dialog", "db_url", DBURL)
> modparam("dialog", "db_mode", 1)
> modparam("dialog", "dlg_flag", 4)
> modparam("dialog", "dlg_match_mode", 1)
>
> ...
>
> request_route {
> if (is_method("INVITE") && (! has_totag() ) ) {
> dlg_manage();
> }
> if (is_method("BYE")) {
> $var(elapsed) = ( $TV(s) - $dlg(start_ts) );
> xlog ("L_INFO", "request_route DIALOG TEST: Completed $dlg(from_uri) to $dlg(to_uri), elapsed: $var(elapsed), now seconds: $TV(s), dlg start time: $dlg(start_ts), DLG_lifetime: $DLG_lifetime");
> }
> ....
>
>
> I hope this message finds every one well.
>
> All the best.
>
> Will
>
> On Thu, Jan 15, 2015 at 12:03 AM, Will Ferrer <will.ferrer@switchsoft.com> wrote:
>>
>> Hi All
>>
>> I am in need of being able to see what the duration of the call was at the time of hang out.
>>
>> I tried turning on the dialog module, but the result is that the values I need are either null or always show as zero.
>>
>> I tried to follow the suggestions in the thread about this here:
>>
>> http://lists.sip-router.org/pipermail/sr-users/2010-October/065889.html
>>
>> In the end my config looks like this:
>>
>> loadmodule "dialog.so"
>>
>> ...
>>
>> modparam("dialog", "dlg_flag", 4)
>> modparam("dialog", "dlg_match_mode", 1)
>>
>> ...
>>
>> request_route {
>> if (is_method("INVITE") && (! has_totag() ) ) {
>> dlg_manage();
>> }
>> if (is_method("BYE")) {
>> $var(elapsed) = ( $TV(s) - $dlg(start_ts) );
>> xlog ("L_INFO", "request_route DIALOG TEST: Completed $dlg(from_uri) to $dlg(to_uri), elapsed: $var(elapsed), now seconds: $TV(s), dlg start time: $dlg(start_ts), DLG_lifetime: $DLG_lifetime");
>> }
>> ....
>>
>>
>>
>> Note that I put at the top of the request route just for testing purposes
>>
>> The result I get in the log is this:
>>
>> INFO: <script>: request_route DIALOG TEST: Completed sip:willf1976Test@develop-sbc.switchsoft.com to sip:+18054515526@develop-sbc.switchsoft.com, elapsed: 1421305210, now seconds: 1421305210, dlg start time: 0, DLG_lifetime: <null>
>>
>>
>> I was wondering if any one could point out to me what I have set up wrong.
>>
>> Thanks in advance
>>
>> All the best.
>>
>> Will Ferrer
>> Switchsoft
>>
>
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
> --
> Daniel-Constantin Mierla
> http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users@lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users