Hi

Re-reading that again I think I am breaking things by trying to use sipcapture to log to the local db on the same copy of kamailio that phones are connected to.  If I am reading it correctly I actually need to run siptrace on the kamailio copy the phones are connected to which will then send the results over to another copy which runs sipcapture….  


Mark


On 1 Sep 2017, at 17:35, David Villasmil <david.villasmil.work@gmail.com> wrote:

Here's explained very simply:


Basically you just need on the request and on the onreply routes, that's it.
If you're not seeing anything, make sure your config looks something like:

#!ifdef WITH_HOMER
# check IP and port of your capture node
modparam("siptrace", "duplicate_uri", "sip:10.0.0.1:9060")
modparam("siptrace", "hep_mode_on", 1)
modparam("siptrace", "trace_to_database", 0)
modparam("siptrace", "trace_flag", 22)
modparam("siptrace", "trace_on", 1)
#!endif
Hope that helps.

Regards,

David Villasmil
phone: +34669448337

On Fri, Sep 1, 2017 at 3:42 PM, Mark Boyce <mark@darkorigins.com> wrote:
Hi Diego

I current have it in;
        request_route
        branch_route
        onreply_route
        failure_route
        reply_route
        onsend_route

Just to try and catch everything I can.  With a plan to then remove what’s not needed.

Although not seeing any kamailio -> phone traffic.  Feels like there’s something not turned on :-(

Cheers

Mark

_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

ᐧ
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users