sr-users

sr-users@lists.kamailio.org

35 participants
37544 discussions

[Serusers] ser: cannot call behind a Nat using rtpproxy
by Americania .it 20 May '06

20 May '06

I've installed ser 0.9.4 on Suse 10 and it's running with mysql. I can register users (I'm using serweb) but I can only make a call from a user inside the Lan (where ser is installed) to a user outside behind a Nat (Fastweb network in Italy, Natted). If i call from this user behind Nat the call does not reach the other user. Viceversa it works fine. I installed the nathelper module and rtpproxy too. I don't know if I configured it well . Have I got to open some additional port in my router on the lan where ser is running (I opened port 5060 udp and tcp only)? I've tried to use Asterix on another pc in the same lan and I don't have this kind of problems with the some users and some clients (3cx phone). Any suggestions ? thanks

2 1

[Serusers] Registering users please help
by ravi reddy 20 May '06

20 May '06

HI Friends, Yesterday I had given a public ip to my linux box and trying to test calls .so, in order to register the users i made the command serctl ul add <username/userid> <username@domain> like this i had added two of my friends names to the location table , but i asked one of my friend to download xten softphone and make configure but i cannot see his registration request and also he tried to make call in xten to another person it is showing call not approved both of my friends are behind NAT , but i used mediaproxy to run along with ser mediaproxy.so module and in ser.cfg it also shows that mediaproxy is from /var/run/mediaproxysocket . there is socket really exists in /var/run. And my mediaproxy is running on ip:port 81.21.33.35:25060 and i dont know whats going wrong Can any body please help me in making test calls , using media proxy Thanks in advance. With regards, Ravi.

1 0

[Users] Fork and ENUM
by Andrew And 20 May '06

20 May '06

Could I do forking in Openser when I am usinging ENUM?

3 3

[Serusers] lookup-only for calling party in subscriber or alias-table
by Thorsten Müller 19 May '06

19 May '06

Hi all, is there a command in ser comparable to "lookup("<table>")" for the called party for the calling party? I would like to now if the calling party is already registered/known(alias-table) at my ser without lancing an authorization procedure with *_authorize("<realm>","<table>"). Thanks Thorsten ___________________________________________________________ Telefonate ohne weitere Kosten vom PC zum PC: http://messenger.yahoo.de

2 1

[Serusers] Radius and Multiple INVITE-ACK
by Nhadie 19 May '06

19 May '06

Hi All, I'm having problem using on sql logging i'm having multiple INV - ACK for a single call, if i use radius accounting, would I still have the same problem? I mean at Radius it's Start and Stop, will it have a mutiple Start? TIA Regards, Nhadie ________________________________________________ Message sent using UebiMiau 2.7

1 0

[Serusers] Warining messages
by luke.2.pilgrim＠bt.com 19 May '06

19 May '06

Hi all, I recieve the following warning messages when loadinf up ser: WARNING: fix_socket_list: could not rev. resolve xxx.xxx.xxx.xxx Is this something to worry about? Also I am able to connect to ser internally but not via it's external address. I have rtpproxy installed and I'm using the nathelper module. Not sure if they are configured correctly but they seem to be running. My client is behing NAT but my server is publically available. Does anyone have any ideas or could you tell me the best way to debug? for example can I moniter registration requests coming in? Regards, Luke.

2 1

[Users] /etc/init.d doesn't work
by Ty Manthey 19 May '06

19 May '06

I just did a removal of 0.9.5 and installed 1.0.1 for RH from RPM. My problem is that the /etc/init.d doesn't work. I get errors for lines 63, 69, 105 : -start-stop-daemon command not found. This is a debian command? Should this also work for RH? Docs also say sample /etc/init.d config file should be at /usr/local/src/openser-1.0.1/sip-server/etc/openser.init ,but /usr/local/src is empty. whereis openser only returns a config file and a folder with modules. I searched the internet but can't find a posting of a working script, just references to the script.

2 1

[Users] TCP <---> UDP Conversion
by T.R. Missner 19 May '06

19 May '06

Hello, Is it possible to use openSER as TCP <--> UDP convertor? I have this working to a certain extent. 1) UA -> TCP INV -> openSER -> UDP INV -> Carrier 2) UA <- TCP 200 <- openSER <- UDP 200 <- Carrier 3) UA -> TCP ACK -> openSER -> UDP ACK -> Carrier Setup transaction works like it should. My question is about subsequent transactions. In the 200 from Carrier (2) a parameter of transport=udp is set on the contact header. Now if the UA is running in an automatic protocol mode ( this would be UA specific ), It honors the transport=udp param and sends a BYE or re-Invite as UDP 4) UA -> UDP BYE -> openSER -> UDP BYE -> Carrier 5) UA <- UDP 200 <- openSER <- UDP 200 <- Carrier Is there a way to re-write the transport= param in the contact header of the 200 ( msg 2 ) so it says transport=tcp Which would then allow the subsequent request messages from UA to be sent tcp? Would doing this break the rfc? Is anyone using openSER to accomplish similar protocol conversion? Thanks, T.R. ________________________________ T.R. Missner Director Enterprise VoIP Products trmissner(a)bandwidth.com 919-439-3575 - Ph 925-888-2997 - Fax 4001 Weston Parkway Cary, NC 27513 ________________________________ CONFIDENTIALITY NOTICE This e-mail message, including any attachments from Bandwidth.com - contain information which is CONFIDENTIAL AND/OR LEGALLY PRIVILEGED. The information is intended only for the use of the individual named above and may not be disseminated to any other party without written permission. If you are not the intended recipient, or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, disclosure, distribution, copying or taking of any action in reliance on the contents of this e-mailed information is strictly prohibited. If you have received this transmission in error, please immediately notify info(a)bandwidth.com, and permanently delete this e-mail and the attachments hereto, if any, and destroy any printout thereof.

2 1

Re: [Serusers] Can't log the Invite
by AR. 19 May '06

19 May '06

Hello Help me please AR. ----- Original Message ----- From: AR. To: serusers(a)lists.iptel.org Sent: Wednesday, May 17, 2006 8:15 PM Subject: [Serusers] Can't log the Invite Dear all My ser+freeradius system does not log the INVITE message , I tried to listen the port 1813 that is radius accounting port, but there is no packet come here , when i call to someone. When i terminated the call , the BYE packet will come. Please help me to solve this promble See below for the ser.cfg . . . modparam("acc","log_level",1) modparam("acc","log_flag",1) modparam("acc","log_missed_flag",2) modparam("acc","failed_transactions",1) modparam("acc","report_ack",0) modparam("acc","report_cancels",1) modparam("acc", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf") modparam("acc","radius_flag",1) modparam("acc","radius_missed_flag",2) . . . if (method=="INVITE" || method=="BYE" || method=="CANCEL") setflag(1); . . . AR.

1 0

RE: Réf. : RE: [Serusers] 'ser-mysql-module_0.9.6-0.1_i386.deb' Debian package NOTworking anymore (Debian 3.1)
by Vince Hoffman 19 May '06

19 May '06

Hmm no but maybe I did, I certainly compiled it from the 0.9.6 tarball from http://ftp.iptel.org/pub/ser/latest/src/ser-0.9.6_src.tar.gz But looking in my package info SIP-PROXY:/var/cache/apt/archives# apt-show-versions | grep ser- ser-cpl-module 0.9.5-0.1 installed: No available version in archive ser-acc-radius-module 0.9.5-0.1 installed: No available version in archive ser-jabber-module 0.9.5-0.1 installed: No available version in archive ser-radius-modules 0.9.5-0.1 installed: No available version in archive ser-postgres-module 0.9.5-0.1 installed: No available version in archive ser-acc-db-module 0.9.5-0.1 installed: No available version in archive ser-pa-module 0.9.5-0.1 installed: No available version in archive ser-mysql-module 0.9.5-0.1 installed: No available version in archive however serctl moni shows I am running Server: Sip EXpress router (0.9.6 (i386/linux)) So I'm guessing the Make deb target in the Makefile gives the wrong version info to the .deb files. I could be doing something stupid though, Has anyone else on the list come across this? Vince ------------------------------------- mnet Internet Limited Support Services Helpdesk: 0870 3335577 Fax: +44 (0)20 7324 3900 Email: support(a)mnet.co.uk Web: www.mnet.co.uk 132-140 Goswell Road London EC1V 7DY -----Original Message----- From: silvere.lapperriere(a)fr.schneider-electric.com [mailto:silvere.lapperriere@fr.schneider-electric.com] Sent: 19 May 2006 10:51 To: Vince Hoffman Subject: Réf. : RE: [Serusers] 'ser-mysql-module_0.9.6-0.1_i386.deb' Debian package NOTworking anymore (Debian 3.1) Thank you for your upload, but it seems, despite its name, that the mysql-module stands for 0.9.5-0.1 version of SER and NOT 0.9.6-0.1.... Did I miss something??? Thank you! "Vince Hoffman" <vhoffman(a)mnet.co Pour : Silvere Lapperriere/FR/Schneider@Europe, <serusers(a)lists.iptel.org> .uk> cc : Objet : RE: [Serusers] 'ser-mysql-module_0.9.6-0.1_i386.deb' Debian package 18/05/2006 18:58 NOTworking anymore (Debian 3.1) I was lazy and just recompiled the debian package (and added the mysql to the accounting modules Makefile) Make deb will do the job although I think I had to add a package or two for the compile to suceed. I can put the .deb from that somewhere if you like. Vince -----Original Message----- From: silvere.lapperriere(a)fr.schneider-electric.com [mailto:silvere.lapperriere@fr.schneider-electric.com] Sent: 18 May 2006 17:50 To: serusers(a)lists.iptel.org Subject: [Serusers] 'ser-mysql-module_0.9.6-0.1_i386.deb' Debian package NOTworking anymore (Debian 3.1) Hi all! The ser-mysql-module_0.9.6-0.1_i386.deb package doesn't work since it depends on 'libmysqlclient15' Debian package which has recently been replaced by 'libmysqlclient15off'. Any ideas?!?? Thank you! _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers This message has been scanned for viruses by 3Labs - www.mnet.net.uk

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users